Control of a class of multibody underactuated mechanical systems with discontinuous friction using sliding-mode

This is the author accepted manuscript. The final version is available from the publisher via the DOI in this record.This paper studies sliding-mode control of a class of multibody underactuated systems with discontinuous friction presenting on the unactuated configuration variable with consideration of parametric uncertainties. Global motion for this class system including sticking, stick-slip, and slip regimes are analyzed, and their corresponding equilibria are identified. Our control objective is to avoid the sticking and stick-slip regimes while track a desired velocity in the slip regime. The proposed sliding-mode controllers are robust to parametric uncertainties, and their stabilities are proved by using the Lyapunov direct method. Two examples, a mass-spring-damping system and a drill-string system, are used to demonstrate the validity of the proposed controllers.The author(s) received no financial support for the research, authorship, and/or publication of this articl

ADAPTIVE WAVELETS SLIDING MODE CONTROL FOR A CLASS OF SECOND ORDER UNDERACTUATED MECHANICAL SYSTEMS

The control of underactuated mechanical systems (UMS) remains an attracting field where researchers can develop their control algorithms. To this date, various linear and nonlinear control techniques using classical and intelligent methods have been published in literature. In this work, an adaptive controller using sliding mode control (SMC) and wavelets network (WN) is proposed for a class of second-order UMS with two degrees of freedom (DOF).This adaptive control strategy takes advantage of both sliding mode control and wavelet properties. In the main result, we consider the case of un-modeled dynamics of the above-mentioned UMS, and we introduce a wavelets network to design an adaptive controller based on the SMC. The update algorithms are directly extracted by using the gradient descent method and conditions are then settled to achieve the required convergence performance.The efficacy of the proposed adaptive approach is demonstrated through an application to the pendubot

A Linear Active Disturbance Rejection Control for a Ball and Rigid Triangle System

This paper proposes an application of linear flatness control along with active disturbance rejection control (ADRC) for the local stabilization and trajectory tracking problems in the underactuated ball and rigid triangle system. To this end, an observer-based linear controller of the ADRC type is designed based on the flat tangent linearization of the system around its corresponding unstable equilibrium rest position. It was accomplished through two decoupled linear extended observers and a single linear output feedback controller, with disturbance cancelation features. The controller guarantees locally exponentially asymptotic stability for the stabilization problem and practical local stability in the solution of the tracking error. An advantage of combining the flatness and the ADRC methods is that it possible to perform online estimates and cancels the undesirable effects of the higher-order nonlinearities discarded by the linearization approximation. Simulation indicates that the proposed controller behaves remarkably well, having an acceptable domain of attraction

Robust Regulation and Tracking Control of a Class of Uncertain 2DOF Underactuated Mechanical Systems

A strategy to design and implement a robust controller for a class of underactuated mechanical systems, with two degrees of freedom, which solves the problems of regulation and trajectory tracking, is proposed. This control strategy considers the partial measurement of the state vector and the presence of parametric uncertainties in the plant; these conditions are common in the implementation of a control system. The strategy is based on the use of robust finite time convergence observers to estimate the unmeasured state variables, unknown disturbances, and other signals needed for the control system implementation. The performance of the control strategy is illustrated numerically and experimentally

Observation and control of a ball on a tilting

The ball and plate system is a nonlinear MIMO system that has interesting characteristics which are also present in aerospace and industrial systems, such as: instability, subactuation, nonlinearities such as friction, backlash, and delays in the measurements. In this work, the modeling of the system is based on the Lagrange approach. Then it is represented in the state-space form with plate accelerations as inputs to the system. These have a similar effect as applying torques. In addition, the use of an internal loop of the servo system is considered. From the obtained model, we proceed to carry out the analysis of controllability and observability resulting in that the system is globally weak observable and locally controllable in the operating range. Then, the Jacobi linearization is performed to use the linearized model in the design of linear controllers for stabilization. On the other hand, analyzing the internal dynamics of the ball and plate system turns out to be a non-minimum phase system, which makes it difficult to design the tracking control using the exact model. This is the reason why we proceed to make approximations. Using the approximate model, nonlinear controllers are designed for tracking using different approaches as: feedback linearization for tracking with and without integral action, backstepping and sliding mode. In addition, linear and nonlinear observers are designed to provide full state information to the controller. Simulation tests are performed comparing the different control and observation approaches. Moreover, the effect of the delay in the measurement is analyzed, where it is seen that the greater the frequency of the reference signal the more the error is increased. Then, adding the Smith predictor compensates the delay and reduces the tracking error. Finally, tests performed with the real system. The system was successfully controlled for stabilization and tracking using the designed controllers. However, it is noticed that the effect of the friction, the spring oscillation and other non-modeled characteristics significantly affect the performance of the control.Tesi

Energy shaping control of underactuated mechanical systems with fluidic actuation

Energy shaping is a remarkably effective control strategy which can be applied to a wide range of systems, including underactuated mechanical systems. However, research in this area has generally neglected actuator dynamics. While this is often appropriate, it might result in degraded performance in the case of fluidic actuation. In this work we present some new results on energy shaping control for underactuated mechanical systems for which the control action is mediated by a pressurized ideal fluid. In particular, we introduce an extended multi-step energy shaping and damping-assignment controller design procedure that builds upon the Interconnection-and-damping-assignment Passivity-based-control methodology in a modular fashion to account for the pressure dynamics of the fluid. Stability conditions are assessed with a Lyapunov approach, the effect of disturbances is discussed, and the case of redundant actuators is illustrated. The proposed approach is demonstrated with numerical simulations for a modified version of the classical ball-on-beam example, which employs two identical cylinders, either hydraulic or pneumatic, to actuate the beam

Nonprehensile Dynamic Manipulation: A Survey

Nonprehensile dynamic manipulation can be reason- ably considered as the most complex manipulation task. It might be argued that such a task is still rather far from being fully solved and applied in robotics. This survey tries to collect the results reached so far by the research community about planning and control in the nonprehensile dynamic manipulation domain. A discussion about current open issues is addressed as well

Contributions to ida-pbc with adaptive control for underactuated mechanical systems

This master thesis is devoted to developing an adaptive control scheme for the well- known Interconnection and Damping Assignment Passivity-Based Control (IDA-PBC) technique. The main objective of this adaptive scheme is to asymptotically stabilize a class of Underactuated Mechanical Systems (UMSs) in the presence of uncertainties (not necessarily matched). This class of UMSs is characterized by the solvability of the Partial Differential Equation (PDE) resulting from the IDA-PBC technique. Two propositions are stated in this work to design the adaptive IDA-PBC. One of the main properties of these propositions is that even though the parameter estimation conver- gence is not guaranteed, the adaptive IDA-PBC achieves asymptotic stabilization. To illustrate the effectiveness of these propositions, this work performs simulations of the Inertia Wheel Inverted Pendulum (IWIP) system, considering a time-dependent input disturbance, a type of physical damping, i.e., friction (not considered in the standard IDA-PBC methodology), and parameter uncertainties in the system (e.g., inertia).Tesi

On the Linear Control of Underactuated Nonlinear Systems Via Tangent Flatness and Active Disturbance Rejection Control: The Case of the Ball and Beam System

In this paper, a systematic procedure for controller design is proposed for a class of nonlinear underactuated systems (UAS), which are non-feedback linearizable but exhibit a controllable (flat) tangent linearization around an equilibrium point. Linear extended state observer (LESO)-based active disturbance rejection control (ADRC) is shown to allow for trajectory tracking tasks involving significantly far excursions from the equilibrium point. This is due to local approximate estimation and compensation of the nonlinearities neglected by the linearization process. The approach is typically robust with respect to other endogenous and exogenous uncertainties and disturbances. The flatness of the tangent model provides a unique structural property that results in an advantageous low-order cascade decomposition of the LESO design, vastly improving the attenuation of noisy and peaking components found in the traditional full order, high gain, observer design. The popular ball and beam system (BBS) is taken as an application example. Experimental results show the effectiveness of the proposed approach in stabilization, as well as in perturbed trajectory tracking tasks