14,811 research outputs found
Viewfinder: final activity report
The VIEW-FINDER project (2006-2009) is an 'Advanced Robotics' project that seeks to apply a semi-autonomous robotic system to inspect ground safety in the event of a fire. Its primary aim is to gather data (visual and chemical) in order to assist rescue personnel. A base station combines the gathered information with information retrieved from off-site sources.
The project addresses key issues related to map building and reconstruction, interfacing local command information with external sources, human-robot interfaces and semi-autonomous robot navigation.
The VIEW-FINDER system is a semi-autonomous; the individual robot-sensors operate autonomously within the limits of the task assigned to them, that is, they will autonomously navigate through and inspect an area. Human operators monitor their operations and send high level task requests as well as low level commands through the interface to any nodes in the entire system. The human interface has to ensure the human supervisor and human interveners are provided a reduced but good and relevant overview of the ground and the robots and human rescue workers therein
Towards Visual Ego-motion Learning in Robots
Many model-based Visual Odometry (VO) algorithms have been proposed in the
past decade, often restricted to the type of camera optics, or the underlying
motion manifold observed. We envision robots to be able to learn and perform
these tasks, in a minimally supervised setting, as they gain more experience.
To this end, we propose a fully trainable solution to visual ego-motion
estimation for varied camera optics. We propose a visual ego-motion learning
architecture that maps observed optical flow vectors to an ego-motion density
estimate via a Mixture Density Network (MDN). By modeling the architecture as a
Conditional Variational Autoencoder (C-VAE), our model is able to provide
introspective reasoning and prediction for ego-motion induced scene-flow.
Additionally, our proposed model is especially amenable to bootstrapped
ego-motion learning in robots where the supervision in ego-motion estimation
for a particular camera sensor can be obtained from standard navigation-based
sensor fusion strategies (GPS/INS and wheel-odometry fusion). Through
experiments, we show the utility of our proposed approach in enabling the
concept of self-supervised learning for visual ego-motion estimation in
autonomous robots.Comment: Conference paper; Submitted to IEEE/RSJ International Conference on
Intelligent Robots and Systems (IROS) 2017, Vancouver CA; 8 pages, 8 figures,
2 table
A Survey of Positioning Systems Using Visible LED Lights
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.As Global Positioning System (GPS) cannot provide satisfying performance in indoor environments, indoor positioning technology, which utilizes indoor wireless signals instead of GPS signals, has grown rapidly in recent years. Meanwhile, visible light communication (VLC) using light devices such as light emitting diodes (LEDs) has been deemed to be a promising candidate in the heterogeneous wireless networks that may collaborate with radio frequencies (RF) wireless networks. In particular, light-fidelity has a great potential for deployment in future indoor environments because of its high throughput and security advantages. This paper provides a comprehensive study of a novel positioning technology based on visible white LED lights, which has attracted much attention from both academia and industry. The essential characteristics and principles of this system are deeply discussed, and relevant positioning algorithms and designs are classified and elaborated. This paper undertakes a thorough investigation into current LED-based indoor positioning systems and compares their performance through many aspects, such as test environment, accuracy, and cost. It presents indoor hybrid positioning systems among VLC and other systems (e.g., inertial sensors and RF systems). We also review and classify outdoor VLC positioning applications for the first time. Finally, this paper surveys major advances as well as open issues, challenges, and future research directions in VLC positioning systems.Peer reviewe
Integration of Absolute Orientation Measurements in the KinectFusion Reconstruction pipeline
In this paper, we show how absolute orientation measurements provided by
low-cost but high-fidelity IMU sensors can be integrated into the KinectFusion
pipeline. We show that integration improves both runtime, robustness and
quality of the 3D reconstruction. In particular, we use this orientation data
to seed and regularize the ICP registration technique. We also present a
technique to filter the pairs of 3D matched points based on the distribution of
their distances. This filter is implemented efficiently on the GPU. Estimating
the distribution of the distances helps control the number of iterations
necessary for the convergence of the ICP algorithm. Finally, we show
experimental results that highlight improvements in robustness, a speed-up of
almost 12%, and a gain in tracking quality of 53% for the ATE metric on the
Freiburg benchmark.Comment: CVPR Workshop on Visual Odometry and Computer Vision Applications
Based on Location Clues 201
Radar and RGB-depth sensors for fall detection: a review
This paper reviews recent works in the literature on the use of systems based on radar and RGB-Depth (RGB-D) sensors for fall detection, and discusses outstanding research challenges and trends related to this research field. Systems to detect reliably fall events and promptly alert carers and first responders have gained significant interest in the past few years in order to address the societal issue of an increasing number of elderly people living alone, with the associated risk of them falling and the consequences in terms of health treatments, reduced well-being, and costs. The interest in radar and RGB-D sensors is related to their capability to enable contactless and non-intrusive monitoring, which is an advantage for practical deployment and users’ acceptance and compliance, compared with other sensor technologies, such as video-cameras, or wearables. Furthermore, the possibility of combining and fusing information from The heterogeneous types of sensors is expected to improve the overall performance of practical fall detection systems. Researchers from different fields can benefit from multidisciplinary knowledge and awareness of the latest developments in radar and RGB-D sensors that this paper is discussing
Optical techniques for 3D surface reconstruction in computer-assisted laparoscopic surgery
One of the main challenges for computer-assisted surgery (CAS) is to determine the intra-opera- tive morphology and motion of soft-tissues. This information is prerequisite to the registration of multi-modal patient-specific data for enhancing the surgeon’s navigation capabilites by observ- ing beyond exposed tissue surfaces and for providing intelligent control of robotic-assisted in- struments. In minimally invasive surgery (MIS), optical techniques are an increasingly attractive approach for in vivo 3D reconstruction of the soft-tissue surface geometry. This paper reviews the state-of-the-art methods for optical intra-operative 3D reconstruction in laparoscopic surgery and discusses the technical challenges and future perspectives towards clinical translation. With the recent paradigm shift of surgical practice towards MIS and new developments in 3D opti- cal imaging, this is a timely discussion about technologies that could facilitate complex CAS procedures in dynamic and deformable anatomical regions
Autonomous flight and remote site landing guidance research for helicopters
Automated low-altitude flight and landing in remote areas within a civilian environment are investigated, where initial cost, ongoing maintenance costs, and system productivity are important considerations. An approach has been taken which has: (1) utilized those technologies developed for military applications which are directly transferable to a civilian mission; (2) exploited and developed technology areas where new methods or concepts are required; and (3) undertaken research with the potential to lead to innovative methods or concepts required to achieve a manual and fully automatic remote area low-altitude and landing capability. The project has resulted in a definition of system operational concept that includes a sensor subsystem, a sensor fusion/feature extraction capability, and a guidance and control law concept. These subsystem concepts have been developed to sufficient depth to enable further exploration within the NASA simulation environment, and to support programs leading to the flight test
- …