5,759 research outputs found
Vision Science and Technology at NASA: Results of a Workshop
A broad review is given of vision science and technology within NASA. The subject is defined and its applications in both NASA and the nation at large are noted. A survey of current NASA efforts is given, noting strengths and weaknesses of the NASA program
Recommended from our members
A Neural Signal Processor for Low-Latency Spike Inference
This thesis describes the development of a system that can assign identities to a population of single-units, in multi-electrode recordings, at single-spike resolution with low-latency. The system has two parts. The first is a Field-Programmable Gate Array (FPGA)-based Neural Signal Processor (NSP) that receives raw input and generates labelled spikes as output, a process referred to as real-time spike inference. The second is a piece of software (Spiketag) that runs on a PC, communicates with the NSP, and generates a spike-sorted model to guide the real-time spike inference. The NSP provides clocks and control signals to five 32-channel INTAN RHD2132 chips to manage the acquisition of 160 channels of raw neural data. In parallel, the NSP further filters, detects and extracts extracellular spike waveforms from the raw neural data recorded by tetrodes or silicon probes and assigns single-unit identity to each detected spike. A set of Python application programming interfaces (APIs) was developed in Spiketag to enable the communication between the NSP and the PC. These APIs allow the NSP to obtain a model from the PC, which holds parameters such as reference channels, spike detection thresholds, spike feature transformation matrix and vector quantized clusters generated by spike sorting a short recording session. Using the spike-sorted model, the NSP performs data acquisition and real-time spike inference simultaneously. Algorithmic modules were implemented in the FPGA and pipelined to compute during 40 ms acquisition intervals. At the output end of the FPGA NSP, the real-time assigned single-unit identity (spike-id) is packaged with the timestamp, the electrode group, and the spike features as a spike-id packet. Spike-id packets are asynchronously transmitted through a low-latency Peripheral Component Interconnect Express (PCIe) interface to the PC, producing the real-time spike trains. The real-time spike trains can be used for further processing, such as real-time decoding. Several types of ground-truth data, including intracellular/extracellular paired recordings, synthesized
tetrode extracellular waveforms with ground-truth spike timing and high-channel-count silicon probe recordings with ground-truth animal positions during navigation were used to validate the low-latency (1 ms) and high-accuracy (as high as state-of-the-art offline sorting and decoding algorithms) of the NSP’s real-time spike inference and the NSP-based
real-time population decoding performance
Grid Analysis of Radiological Data
IGI-Global Medical Information Science Discoveries Research Award 2009International audienceGrid technologies and infrastructures can contribute to harnessing the full power of computer-aided image analysis into clinical research and practice. Given the volume of data, the sensitivity of medical information, and the joint complexity of medical datasets and computations expected in clinical practice, the challenge is to fill the gap between the grid middleware and the requirements of clinical applications. This chapter reports on the goals, achievements and lessons learned from the AGIR (Grid Analysis of Radiological Data) project. AGIR addresses this challenge through a combined approach. On one hand, leveraging the grid middleware through core grid medical services (data management, responsiveness, compression, and workflows) targets the requirements of medical data processing applications. On the other hand, grid-enabling a panel of applications ranging from algorithmic research to clinical use cases both exploits and drives the development of the services
Flexi-WVSNP-DASH: A Wireless Video Sensor Network Platform for the Internet of Things
abstract: Video capture, storage, and distribution in wireless video sensor networks
(WVSNs) critically depends on the resources of the nodes forming the sensor
networks. In the era of big data, Internet of Things (IoT), and distributed
demand and solutions, there is a need for multi-dimensional data to be part of
the Sensor Network data that is easily accessible and consumable by humanity as
well as machinery. Images and video are expected to become as ubiquitous as is
the scalar data in traditional sensor networks. The inception of video-streaming
over the Internet, heralded a relentless research for effective ways of
distributing video in a scalable and cost effective way. There has been novel
implementation attempts across several network layers. Due to the inherent
complications of backward compatibility and need for standardization across
network layers, there has been a refocused attention to address most of the
video distribution over the application layer. As a result, a few video
streaming solutions over the Hypertext Transfer Protocol (HTTP) have been
proposed. Most notable are Apple’s HTTP Live Streaming (HLS) and the Motion
Picture Experts Groups Dynamic Adaptive Streaming over HTTP (MPEG-DASH). These
frameworks, do not address the typical and future WVSN use cases. A highly
flexible Wireless Video Sensor Network Platform and compatible DASH (WVSNP-DASH)
are introduced. The platform's goal is to usher video as a data element that
can be integrated into traditional and non-Internet networks. A low cost,
scalable node is built from the ground up to be fully compatible with the
Internet of Things Machine to Machine (M2M) concept, as well as the ability to
be easily re-targeted to new applications in a short time. Flexi-WVSNP design
includes a multi-radio node, a middle-ware for sensor operation and
communication, a cross platform client facing data retriever/player framework,
scalable security as well as a cohesive but decoupled hardware and software
design.Dissertation/ThesisDoctoral Dissertation Electrical Engineering 201
Radial Basis Functions: Biomedical Applications and Parallelization
Radial basis function (RBF) is a real-valued function whose values depend only on the distances between an interpolation point and a set of user-specified points called centers. RBF interpolation is one of the primary methods to reconstruct functions from multi-dimensional scattered data. Its abilities to generalize arbitrary space dimensions and to provide spectral accuracy have made it particularly popular in different application areas, including but not limited to: finding numerical solutions of partial differential equations (PDEs), image processing, computer vision and graphics, deep learning and neural networks, etc.
The present thesis discusses three applications of RBF interpolation in biomedical engineering areas: (1) Calcium dynamics modeling, in which we numerically solve a set of PDEs by using meshless numerical methods and RBF-based interpolation techniques; (2) Image restoration and transformation, where an image is restored from its triangular mesh representation or transformed under translation, rotation, and scaling, etc. from its original form; (3) Porous structure design, in which the RBF interpolation used to reconstruct a 3D volume containing porous structures from a set of regularly or randomly placed points inside a user-provided surface shape. All these three applications have been investigated and their effectiveness has been supported with numerous experimental results. In particular, we innovatively utilize anisotropic distance metrics to define the distance in RBF interpolation and apply them to the aforementioned second and third applications, which show significant improvement in preserving image features or capturing connected porous structures over the isotropic distance-based RBF method.
Beside the algorithm designs and their applications in biomedical areas, we also explore several common parallelization techniques (including OpenMP and CUDA-based GPU programming) to accelerate the performance of the present algorithms. In particular, we analyze how parallel programming can help RBF interpolation to speed up the meshless PDE solver as well as image processing. While RBF has been widely used in various science and engineering fields, the current thesis is expected to trigger some more interest from computational scientists or students into this fast-growing area and specifically apply these techniques to biomedical problems such as the ones investigated in the present work
DCT Implementation on GPU
There has been a great progress in the field of graphics processors. Since, there is no rise in the speed of the normal CPU processors; Designers are coming up with multi-core, parallel processors. Because of their popularity in parallel processing, GPUs are becoming more and more attractive for many applications. With the increasing demand in utilizing GPUs, there is a great need to develop operating systems that handle the GPU to full capacity. GPUs offer a very efficient environment for many image processing applications. This thesis explores the processing power of GPUs for digital image compression using Discrete cosine transform
Network streaming and compression for mixed reality tele-immersion
Bulterman, D.C.A. [Promotor]Cesar, P.S. [Copromotor
Exploiting different levels of parallelism in the biological sequence comparison problem
In the last years the fast growth of bioinformatics field has atracted the attention of computer scientists. At the same
time, de exponential growth of databases that contains biological information (such as protein and DNA data) demands great efforts to improve the performance of computational platforms. In this work, we investigate how bioinformatics applications benefit from parallel architectures that combine different alternatives to exploit coarse- and fine-grain parallelism. As a case of analysis, we study the performance behavior of the Ssearch application that implements the Smith-Waterman algorithm (SW), which is a dynamic programing
approach that explores the similarity between a pair of sequences. The inherent large parallelism of the application
makes it ideal for architectures supporting multiple dimensions of parallelism (thread-level parallelism, TLP; data-level
parallelism, DLP; instruction-level parallelism, ILP). We study how this algorithm can take advantage of different parallel machines like the SGI Altix, IBM Power6, IBM Cell BE and MareNostrum machines. Our study includes a qualitative analysis of the parallelization opportunities and also the quantification of the performance in terms of speedup and
execution time. These measures are collected taking into account the specific characteristics of each architecture. As
an example, our results show that a share memory multiprocessor architecture (SMP) like the PowerPC 970MP of Marenostrum machine can surpasses a heterogeneous multi-
processor machine like the current IBM Cell BE.Peer ReviewedPostprint (published version
Application of advanced on-board processing concepts to future satellite communications systems
An initial definition of on-board processing requirements for an advanced satellite communications system to service domestic markets in the 1990's is presented. An exemplar system architecture with both RF on-board switching and demodulation/remodulation baseband processing was used to identify important issues related to system implementation, cost, and technology development
- …