Gemini Telepresence Robot System Design: A Low-Cost Solution for Manipulation and Enhanced Perception of Telepresence Robots

Current telepresence robots are costly and only allow the operator to see the environment on a 2D screen and move around on a wheelbase. Thus, these telepresence devices are severely limited because of the high barrier of entry, and the operator is unable to manipulate objects or easily perceive the world in 3D. Therefore, to address these gaps in capabilities, Gemini, an open-source telepresence humanoid robot and interface station, was designed to grant the operator the ability to manipulate objects, expand the human interface by putting the user in the 3D world with the use of a virtual reality (VR) headset, and be low-cost. The simplistic, low-cost, and intuitive controls of Gemini promote early adoption by businesses and medical personnel to grant increased telepresence needs. In addition, this platform can be utilized by robotics enthusiasts and university researchers studying humanoid robotics or human-robot interaction. This paper presents an overview of the Gemini robot’s mechanical, electrical, and programmatic systems. Upon completion of this study, it was found that Gemini was able to grant the ability to manipulate objects, increase user perception with intuitive controls, in addition to costing approximately 30% less than commercial telepresence robots. Furthermore, the paper is concluded with remarks on future iterations of the project

Identification of Hazards in Invasive/Surgical Robotics

Service robotics receives more and more attention in the developed world beside industrial applications. While industrial robotics conquered the factories, it was important that researches develop a number of principles and guidelines to help minimizing the risk of human accidents. Today’s safety standards of industrial robotics almost completely exclude the possibility of physical interaction between the human operator and the robotic device. Just recently, a new paradigm, the divided workspace has prevailed, and as a consequence, a number of new and critical safety issues have emerged. Service robots have become even more complicated, as we cannot erect a fence around domestic robots, and in the case of medical robotics, the human–machine interaction is inevitable. The goal of this research was to explore and quantify human–machine interactions, and classify them based on their hazard level. The focus is on surgical robotic devices and their current applications, as this situation presents one of the most complex form of interaction. It is necessary to make service robots complying with safety standards, based on a unified and generally accepted methodology

Developing a low-cost beer dispensing robotic system for the service industry

As the prices of commercially available electronic and mechanical components decrease, manufacturers such as Devantech and Revolution Education have made encoded motor controller systems and microcontrollers very accessible to engineers and designers. This has made it possible to design sophisticated robotic and mechatronic systems very rapidly and at relatively low cost. A recent project in the Autonomous Systems Lab at Middlesex University, UK was to design and build a small, automated, robotic bartender based around the 5 litre Heineken 'Draughtkeg' system, which is capable of patrolling a bar and dispensing beer when signalled to by a customer. Because the system was designed as a commercial product, design constraints focused on keeping the build cost down, and so electronic components were sourced from outside companies and interfaced with a bespoke chassis and custom mechanical parts designed and manufactured on site at the University. All the programming was conducted using the proprietary BASIC language, which is freely available from the PicAXE supplier at no cost. This paper will discuss the restrictions involved in building a robot chassis around 'off-theshelf' components, and the issues arising from making the human-machine interaction intuitive whilst only using low-cost ultrasonic sensors. Programming issues will also be discussed, such as the control of accuracy when interfacing a PicAXE microcontroller with a Devantech MD25 Motor Controller board. Public live testing of the system was conducted at the Kinetica Art Fair 2010 event in London and has since been picked up by websites such as Engadget.com and many others. Feedback on the system will be described, as well as the refinements made as a result of these test

Internet of robotic things : converging sensing/actuating, hypoconnectivity, artificial intelligence and IoT Platforms

The Internet of Things (IoT) concept is evolving rapidly and influencing newdevelopments in various application domains, such as the Internet of MobileThings (IoMT), Autonomous Internet of Things (A-IoT), Autonomous Systemof Things (ASoT), Internet of Autonomous Things (IoAT), Internetof Things Clouds (IoT-C) and the Internet of Robotic Things (IoRT) etc.that are progressing/advancing by using IoT technology. The IoT influencerepresents new development and deployment challenges in different areassuch as seamless platform integration, context based cognitive network integration,new mobile sensor/actuator network paradigms, things identification(addressing, naming in IoT) and dynamic things discoverability and manyothers. The IoRT represents new convergence challenges and their need to be addressed, in one side the programmability and the communication ofmultiple heterogeneous mobile/autonomous/robotic things for cooperating,their coordination, configuration, exchange of information, security, safetyand protection. Developments in IoT heterogeneous parallel processing/communication and dynamic systems based on parallelism and concurrencyrequire new ideas for integrating the intelligent “devices”, collaborativerobots (COBOTS), into IoT applications. Dynamic maintainability, selfhealing,self-repair of resources, changing resource state, (re-) configurationand context based IoT systems for service implementation and integrationwith IoT network service composition are of paramount importance whennew “cognitive devices” are becoming active participants in IoT applications.This chapter aims to be an overview of the IoRT concept, technologies,architectures and applications and to provide a comprehensive coverage offuture challenges, developments and applications

Can models of agents be transferred between different areas?

One of the main reasons for the sustained activity and interest in the field of agent-based systems, apart from the obvious recognition of its value as a natural and intuitive way of understanding the world, is its reach into very many different and distinct fields of investigation. Indeed, the notions of agents and multi-agent systems are relevant to fields ranging from economics to robotics, in contributing to the foundations of the field, being influenced by ongoing research, and in providing many domains of application. While these various disciplines constitute a rich and diverse environment for agent research, the way in which they may have been linked by it is a much less considered issue. The purpose of this panel was to examine just this concern, in the relationships between different areas that have resulted from agent research. Informed by the experience of the participants in the areas of robotics, social simulation, economics, computer science and artificial intelligence, the discussion was lively and sometimes heated

Integration of Action and Language Knowledge: A Roadmap for Developmental Robotics

“This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder." “Copyright IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.”This position paper proposes that the study of embodied cognitive agents, such as humanoid robots, can advance our understanding of the cognitive development of complex sensorimotor, linguistic, and social learning skills. This in turn will benefit the design of cognitive robots capable of learning to handle and manipulate objects and tools autonomously, to cooperate and communicate with other robots and humans, and to adapt their abilities to changing internal, environmental, and social conditions. Four key areas of research challenges are discussed, specifically for the issues related to the understanding of: 1) how agents learn and represent compositional actions; 2) how agents learn and represent compositional lexica; 3) the dynamics of social interaction and learning; and 4) how compositional action and language representations are integrated to bootstrap the cognitive system. The review of specific issues and progress in these areas is then translated into a practical roadmap based on a series of milestones. These milestones provide a possible set of cognitive robotics goals and test scenarios, thus acting as a research roadmap for future work on cognitive developmental robotics.Peer reviewe