Aerospace Medicine and Biology: A continuing bibliography with indexes, supplement 145

This bibliography lists 301 reports, articles, and other documents introduced into the NASA scientific and technical information system in August 1975

A survey of new technology for cockpit application to 1990's transport aircraft simulators

Two problems were investigated: inter-equipment data transfer, both on board the aircraft and between air and ground; and crew equipment communication via the cockpit displays and controls. Inter-equipment data transfer is discussed in terms of data bus and data link requirements. Crew equipment communication is discussed regarding the availability of CRT display systems for use in research simulators to represent flat panel displays of the future, and of software controllable touch panels

Aerospace medicine and biology: A continuing bibliography with indexes (supplement 323)

This bibliography lists 125 reports, articles and other documents introduced into the NASA Scientific and Technical Information System during April, 1989. Subject coverage includes; aerospace medicine and psychology, life support systems and controlled environments, safety equipment exobiology and extraterrestrial life, and flight crew behavior and performance

Computer vision in target pursuit using a UAV

Research in target pursuit using Unmanned Aerial Vehicle (UAV) has gained attention in recent years, this is primarily due to decrease in cost and increase in demand of small UAVs in many sectors. In computer vision, target pursuit is a complex problem as it involves the solving of many sub-problems which are typically concerned with the detection, tracking and following of the object of interest. At present, the majority of related existing methods are developed using computer simulation with the assumption of ideal environmental factors, while the remaining few practical methods are mainly developed to track and follow simple objects that contain monochromatic colours with very little texture variances. Current research in this topic is lacking of practical vision based approaches. Thus the aim of this research is to fill the gap by developing a real-time algorithm capable of following a person continuously given only a photo input. As this research considers the whole procedure as an autonomous system, therefore the drone is activated automatically upon receiving a photo of a person through Wi-Fi. This means that the whole system can be triggered by simply emailing a single photo from any device anywhere. This is done by first implementing image fetching to automatically connect to WIFI, download the image and decode it. Then, human detection is performed to extract the template from the upper body of the person, the intended target is acquired using both human detection and template matching. Finally, target pursuit is achieved by tracking the template continuously while sending the motion commands to the drone. In the target pursuit system, the detection is mainly accomplished using a proposed human detection method that is capable of detecting, extracting and segmenting the human body figure robustly from the background without prior training. This involves detecting face, head and shoulder separately, mainly using gradient maps. While the tracking is mainly accomplished using a proposed generic and non-learning template matching method, this involves combining intensity template matching with colour histogram model and employing a three-tier system for template management. A flight controller is also developed, it supports three types of controls: keyboard, mouse and text messages. Furthermore, the drone is programmed with three different modes: standby, sentry and search. To improve the detection and tracking of colour objects, this research has also proposed several colour related methods. One of them is a colour model for colour detection which consists of three colour components: hue, purity and brightness. Hue represents the colour angle, purity represents the colourfulness and brightness represents intensity. It can be represented in three different geometric shapes: sphere, hemisphere and cylinder, each of these shapes also contains two variations. Experimental results have shown that the target pursuit algorithm is capable of identifying and following the target person robustly given only a photo input. This can be evidenced by the live tracking and mapping of the intended targets with different clothing in both indoor and outdoor environments. Additionally, the various methods developed in this research could enhance the performance of practical vision based applications especially in detecting and tracking of objects

DragonflEYE: a passive approach to aerial collision sensing

"This dissertation describes the design, development and test of a passive wide-field optical aircraft collision sensing instrument titled 'DragonflEYE'. Such a ""sense-and-avoid"" instrument is desired for autonomous unmanned aerial systems operating in civilian airspace. The instrument was configured as a network of smart camera nodes and implemented using commercial, off-the-shelf components. An end-to-end imaging train model was developed and important figures of merit were derived. Transfer functions arising from intermediate mediums were discussed and their impact assessed. Multiple prototypes were developed. The expected performance of the instrument was iteratively evaluated on the prototypes, beginning with modeling activities followed by laboratory tests, ground tests and flight tests. A prototype was mounted on a Bell 205 helicopter for flight tests, with a Bell 206 helicopter acting as the target. Raw imagery was recorded alongside ancillary aircraft data, and stored for the offline assessment of performance. The ""range at first detection"" (R0), is presented as a robust measure of sensor performance, based on a suitably defined signal-to-noise ratio. The analysis treats target radiance fluctuations, ground clutter, atmospheric effects, platform motion and random noise elements. Under the measurement conditions, R0 exceeded flight crew acquisition ranges. Secondary figures of merit are also discussed, including time to impact, target size and growth, and the impact of resolution on detection range. The hardware was structured to facilitate a real-time hierarchical image-processing pipeline, with selected image processing techniques introduced. In particular, the height of an observed event above the horizon compensates for angular motion of the helicopter platform.

ROBOMIRROR: A SIMULATED MIRROR DISPLAY WITH A ROBOTIC CAMERA

Simulated mirror displays have a promising prospect in applications, due to its capability for virtual visualization. In most existing mirror displays, cameras are placed on top of the displays and unable to capture the person in front of the display at the highest possible resolution. The lack of a direct frontal capture of the subject\u27s face and the geometric error introduced by image warping techniques make realistic mirror image rendering a challenging problem. The objective of this thesis is to explore the use of a robotic camera in tracking the face of the subject in front of the display to obtain a high-quality image capture. Our system uses a Bislide system to control a camera for face capture, while using a separate color-depth camera for accurate face tracking. We construct an optical device in which a one-way mirror is used so that the robotic camera behind can capture the subject while the rendered images can be displayed by reflecting off the mirror from an overhead projector. A key challenge of the proposed system is the reduction of light due to the one-way mirror. The optimal 2D Wiener filter is selected to enhance the low contrast images captured by the camera

Application of Machine Vision in UAVs for Autonomous Target Tracking

This research presents experimental results for the application of Machine Vision (MV) techniques to address the problem of target detection and tracking. The main objective is the design of a prototype UAV surveillance environment to emulate real-life conditions. The model environment for this experiment consists of a target simulated by a small electric train system, located at ground level, and a MV camera mounted on a motion-based apparatus located directly above the model setup. This system is meant to be a non-flying mockup of an aerial robot retrofitted with a MV sensor. Therefore, the final design is a two degree-of-freedom gantry simulating aircraft motions above the ground level at a constant altitude. On the ground level, the design of the landscape is an attempt to achieve a realistic natural landscape within a laboratory setting. Therefore, the scenery consists of small scale trees, bushes, a mountain, and a tunnel system within a 914 mm by 1066 mm boundary. To detect and track the moving train, MV algorithms are implemented in a Matlab/SimulinkRTM based simulation environment. Specifically, image pre-processing techniques and circle detection algorithms are implemented to detect and identify the chimney stack on the train engine. The circle detection algorithms analyzed in this research effort consists of a least squares based method and the Hough transform (HT) method for circle detection. The experimental results will show that the solution to the target detection problem could produce a positive detection rate of 90% during each simulation while utilizing only 56% of the input image. Tracking and timing data also shows that the least squares based target detection method performs substantially better then the HT method. This is evident from the result of using a 1--2 Hz frequency update rate for the SimulinkRTM scheme which is acceptable, in some cases, for use in navigation for a UAV performing scouting and reconnaissance missions. The development of vision-based control strategies, similar to the approach presented in this research, allows UAVs to participate in complex missions involving autonomous target tracking

Adaptive multiresolution visualization of large multidimensional multivariate scientific datasets

The sizes of today\u27s scientific datasets range from megabytes to terabytes, making it impossible to directly browse the raw datasets visually. This presents significant challenges for visualization scientists who are interested in supporting these datasets. In this thesis, we present an adaptive data representation model which can be utilized with many of the commonly employed visualization techniques when dealing with large amounts of data. Our hierarchical design also alleviates the long standing visualization problem due to limited display space. The idea is based on using compactly supported orthogonal wavelets and additional downsizing techniques to generate a hierarchy of fine to coarse approximations of a very large dataset for visualization. An adaptive data hierarchy, which contains authentic multiresolution approximations and the corresponding error, has many advantages over the original data. First, it allows scientists to visualize the overall structure of a dataset by browsing its coarse approximations. Second, the fine approximations of the hierarchy provide local details of the interesting data subsets. Third, the error of the data representation can provide the scientist with information about the authenticity of the data approximation. Finally, in a client-server network environment, a coarse representation can increase the efficiency of a visualization process by quickly giving users a rough idea of the dataset before they decide whether to continue the transmission or to abort it. For datasets which require long rendering time, an authentic approximation of a very large dataset can speed up the visualization process greatly. Variations on the main wavelet-based multiresolution hierarchy described in this thesis also lead to other multiresolution representation mechanisms. For example, we investigate the uses of norm projections and principal components to build multiresolution data hierarchies of large multivariate datasets. This leads to the development of a more flexible dual multiresolution visualization environment for large data exploration. We present the results of experimental studies of our adaptive multiresolution representation using wavelets. Utilizing a multiresolution data hierarchy, we illustrate that information access from a dataset with tens of millions of data values can be achieved in real time. Based on these results, we propose procedures to assist in generating a multiresolution hierarchy of a large dataset. For example, the findings indicate that an ordinary computed tomography volume dataset can be represented effectively for some tasks by an adaptive data hierarchy with less than 1.5% of its original size