Decentralized H∞ Control of Interconnected Systems with Time-varying Delays

This paper focuses on the problem of delay dependent stability/stabilization of interconnected systems with time-varying delays. The approach is based on a new Lyapunov-Krasovskii functional. A decentralized delay-dependent stability analysis is performed to characterize linear matrix inequalities (LMIs) based on the conditions under which every local subsystem of the linear interconnected delay system is asymptotically stable. Then we design a decentralized state-feedback stabilization scheme such that the family of closedloop feedback subsystems enjoys the delay-dependent asymptotic stability for each subsystem. The decentralized feedback gains are determined by convex optimization over LMIs. All the developed results are tested on a representative example and compared with some recent previous ones

Contributions to fuzzy polynomial techniques for stability analysis and control

The present thesis employs fuzzy-polynomial control techniques in order to improve the stability analysis and control of nonlinear systems. Initially, it reviews the more extended techniques in the field of Takagi-Sugeno fuzzy systems, such as the more relevant results about polynomial and fuzzy polynomial systems. The basic framework uses fuzzy polynomial models by Taylor series and sum-of-squares techniques (semidefinite programming) in order to obtain stability guarantees. The contributions of the thesis are: ¿ Improved domain of attraction estimation of nonlinear systems for both continuous-time and discrete-time cases. An iterative methodology based on invariant-set results is presented for obtaining polynomial boundaries of such domain of attraction. ¿ Extension of the above problem to the case with bounded persistent disturbances acting. Different characterizations of inescapable sets with polynomial boundaries are determined. ¿ State estimation: extension of the previous results in literature to the case of fuzzy observers with polynomial gains, guaranteeing stability of the estimation error and inescapability in a subset of the zone where the model is valid. ¿ Proposal of a polynomial Lyapunov function with discrete delay in order to improve some polynomial control designs from literature. Preliminary extension to the fuzzy polynomial case. Last chapters present a preliminary experimental work in order to check and validate the theoretical results on real platforms in the future.Pitarch Pérez, JL. (2013). Contributions to fuzzy polynomial techniques for stability analysis and control [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/34773TESI

Membership-Function-Dependent Design of L1-Gain Output-Feedback Controller for Stabilization of Positive Polynomial Fuzzy Systems

The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link.This paper presents the L1-gain polynomial fuzzy output feedback controller design and the stability analysis using sum-of-squares (SOS) approach for positive polynomial fuzzy-model-based (PPFMB) control systems. The polynomials, positivity and optimal L1 performance makes some existing convex methods for general systems inapplicable. To overcome this problem, an augmented system of the positive polynomial fuzzy-model-based control system is first constructed, then by introducing some constrain conditions and mathematical tech niques, the non-convex stability and positivity conditions are skill fully transformed into convex ones simultaneously. In addition, to control the systems flexibly and lower the implementation cost, the imperfect premise matching concept is taken into account for controller design. Besides, the high degree polynomial approximation method is adopted to conduct stability and posi tivity analysis by incorporating the information of membership functions (MFs) and the boundary information of the state variables. On the basis of the Lyapunov stability theory, the relaxed stability and positivity conditions in terms of SOS are obtained. Finally, a simulation example is presented to verify the feasibility of the theoretical result

Experimental application of Takagi-Sugeno observers and controllers in a nonlinear electromechanical system

[EN] In this paper, a systematic methodology to design fuzzy Takagi-Sugeno observers and controllers will be used to estimate the angular positions and speeds, as well as to stabilise an experimental mechanical system with 3 degrees of freedom (fixed quadrotor). Takagi-Sugeno observers and controllers are compared to observers and controllers based on the linearized model, both designed with the same optimization criteria and design parameters. Experimental results confirm that Takagi-Sugeno models and observers behave similarly to linear ones around the linearization point, but have a better performance over a larger operating range, as intuitively expected.The work of Zs. Lendek was supported by a grant of the Romanian National Authority for Scientific Research, CNCS UEFISCDI, project number PN-II-RU-TE-2011-3-0043, contract number 74/05.10.2011. Spanish authors are grateful to grants DPI2011-27845-C02-01 (A. Sala), DPI2011-27845-C02-02 (R. Sanchis), DPI2011-28507-C02-01 (P. Garcia) from Spanish Government, and PROMETEOII/2013/004 (A. Sala, P. Garcia) from Generalitat Valenciana.Lendek, Z.; Sala, A.; García Gil, PJ.; Sanchis Llopis, R. (2013). Experimental application of Takagi-Sugeno observers and controllers in a nonlinear electromechanical system. Control Engineering and Applied Informatics. 15(4):3-14. http://hdl.handle.net/10251/150453S31415

Advances in Control of Power Electronic Converters

This book proposes a list of contributions in the field of control of power electronics converters for different topologies: DC-DC, DC-AC and AC-DC. It particularly focuses on the use of different advanced control techniques with the aim of improving the performances, flexibility and efficiency in the context of several operation conditions. Sliding mode control, fuzzy logic based control, dead time compensation and optimal linear control are among the techniques developed in the special issue. Simulation and experimental results are provided by the authors to validate the proposed control strategies

あるクラスの非線形システムに対する状態フィードバックと推定のための区分多項式リアプノフ関数アプローチ

電気通信大学201

Stability of Uncertainty Piecewise Affine Time-Delay Systems with Application to All Wheel Drive Clutch Control.

Piecewise affine (PWA) systems provide good flexibility and traceability for modeling a variety of nonlinear systems. The stability of PWA systems is an important but challenging problem since the stability of the sub-systems does not directly imply the stability of the global system. Meanwhile, time delays and uncertainty exist in many practical systems in engineering and introduce various complex behaviors such as oscillation, instability and poor performance. To ensure the stability of the practical control systems developed via the PWA system framework, the stability of uncertain PWA time-delay systems is investigated. In addition, a quantitative description of asymptotic behavior for time-delay systems is also studied. First, the stability problem for uncertain piecewise affine time-delay systems is investigated. It is assumed that there exists a constant time delay in the system and the uncertainly is norm-bounded. Sufficient conditions for the stability of nominal systems and the stability of systems subject to uncertainty are derived using the Lyapunov-Krasovskii functional with a triple integration term. This approach handles switching based on the delayed states (in addition to the states) for a PWA time-delay system, considers structured as well as unstructured uncertainty, and reduces the conservativeness of previous approaches. Second, an application of the PWA system framework to the modeling and control of an automotive all wheel drive clutch system is presented. The open-loop system is modeled as a PWA system, followed by the design of a piecewise linear feedback controller. The stability of the closed-loop system is examined using the proposed stability method. Finally, a new Lambert W function based approach for estimation of the decay function for time-delay systems is presented. Using this solution form, a decay function estimate, which is less conservative than existing methods, is obtained.Ph.D.Mechanical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/86297/1/duansm_1.pd

Advances in gain-scheduling and fault tolerant control techniques

This thesis presents some contributions to the state-of-the-art of the fields of gain-scheduling and fault tolerant control (FTC). In the area of gain-scheduling, the connections between the linear parameter varying (LPV) and Takagi-Sugeno (TS) paradigms are analyzed, showing that the methods for the automated generation of models by nonlinear embedding and by sector nonlinearity, developed for one class of systems, can be easily extended to deal with the other class. Then, two measures, based on the notions of overboundedness and region of attraction estimates, are proposed in order to compare different models and choose which one can be considered the best one. Later, the problem of designing state-feedback controllers for LPV systems has been considered, providing two main contributions. First, robust LPV controllers that can guarantee some desired performances when applied to uncertain LPV systems are designed, by using a double-layer polytopic description that takes into account both the variability due to the varying parameter vector and the uncertainty. Then, the idea of designing the controller in such a way that the required performances are scheduled by the varying parameters is explored, which provides an elegant way to vary online the behavior of the closed-loop system. In both cases, the problem reduces to finding a solution to a finite number of linear matrix inequalities (LMIs), which can be done efficiently using the available solvers. In the area of fault tolerant control, the thesis first shows that the aforementioned double-layer polytopic framework can be used for FTC, in such a way that different strategies (passive, active and hybrid) are obtained depending on the amount of available information. Later, an FTC strategy for LPV systems that involves a reconfigured reference model and virtual actuators is developed. It is shown that by including the saturations in the reference model equations, it is possible to design a model reference FTC system that automatically retunes the reference states whenever the system is affected by saturation nonlinearities. In this way, a graceful performance degradation in presence of actuator saturations is incorporated in an elegant way. Finally, the problem of FTC of unstable LPV systems subject to actuator saturations is considered. In this case, the design of the virtual actuator is performed in such a way that the convergence of the state trajectory to zero is assured despite the saturations and the appearance of faults. Also, it is shown that it is possible to obtain some guarantees about the tolerated delay between the fault occurrence and its isolation, and that the nominal controller can be designed so as to maximize the tolerated delay.Aquesta tesi presenta diverses contribucions a l'estat de l'art del control per planificació del guany i del control tolerant a fallades (FTC). Pel que fa al control per planificació del guany, s'analitzen les connexions entre els paradigmes dels sistemes lineals a paràmetres variants en el temps (LPV) i de Takagi-Sugeno (TS). Es demostra que els mètodes per a la generació automàtica de models mitjançant encastament no lineal i mitjançant no linealitat sectorial, desenvolupats per una classe de sistemes, es poden estendre fàcilment per fer-los servir amb l'altra classe. Es proposen dues mesures basades en les nocions de sobrefitació i d'estimació de la regió d'atracció, per tal de comparar diferents models i triar quin d'ells pot ser considerat el millor. Després, es considera el problema de dissenyar controladors per realimentació d'estat per a sistemes LPV, proporcionant dues contribucions principals. En primer lloc, fent servir una descripció amb doble capa politòpica que té en compte tant la variabilitat deguda al vector de paràmetres variants i la deguda a la incertesa, es dissenyen controladors LPV robustos que puguin garantir unes especificacions desitjades quan s'apliquen a sistemes LPV incerts. En segon lloc, s'explora la idea de dissenyar el controlador de tal manera que les especificacions requerides siguin programades pels paràmetres variants. Això proporciona una manera elegant de variar en línia el comportament del sistema en llaç tancat. En tots dos casos, el problema es redueix a trobar una solució d'un nombre finit de desigualtats matricials lineals (LMIs), que es poden resoldre fent servir algorismes numèrics disponibles i molt eficients. En l'àrea del control tolerant a fallades, primerament la tesi mostra que la descripció amb doble capa politòpica abans esmentada es pot utilitzar per fer FTC, de tal manera que, en funció de la quantitat d'informació disponible, s'obtenen diferents estratègies (passiva, activa i híbrida). Després, es desenvolupa una estratègia de FTC per a sistemes LPV que fa servir un model de referència reconfigurat combinat amb la tècnica d'actuadors virtuals. Es mostra que mitjançant la inclusió de les saturacions en les equacions del model de referència, és possible dissenyar un sistema de control tolerant a fallades que resintonitza automàticament els estats de referència cada vegada que el sistema es veu afectat per les no linealitats de la saturació en els actuadors. D'aquesta manera s'incorpora una degradació elegant de les especificacions en presència de saturacions d'actuadors. Finalment, es considera el problema de FTC per sistemes LPV inestables afectats per saturacions d'actuadors. En aquest cas, es porta a terme el disseny de l'actuador virtual de tal manera que la convergència a zero de la trajectòria d'estat està assegurada tot i les saturacions i l'aparició de fallades. A més, es mostra que és possible obtenir garanties sobre el retard tolerat entre l'aparició d'una fallada i el seu aïllament, i que el controlador nominal es pot dissenyar maximitzant el retard tolerat

Contributions to nonlinear system modelling and controller synthesis via convex structures

Esta tesis discute diferentes metodologías de modelado para extraer mejores prestaciones o resultados de estabilidad que aquéllas que el modelado convencional basado en sector no-lineal de sistemas Takagi-Sugeno (también denominados cuasi-LPV) es capaz de producir. En efecto, incluso si las LMIs pueden probar distintas cotas de prestaciones o márgenes de estabilidad (tasa de decaimiento, $\mathcal H_\infty$, etc.) para sistemas politópicos, es bien conocido que las prestaciones probadas dependen del modelo elegido y, dado un sistema no-lineal, dicho modelo politópico no es único. Por tanto, se presentan exploraciones hacia cómo obtener el modelo que es menos perjudicial para la medida de prestaciones elegida. Como una última contribución, mejores resultados son obtenidos mediante la extensión del modelado politópico Takagi-Sugeno a un marco de inclusiones en diferencias cuasi-convexas con planificación de ganancia. En efecto, una versión sin planificación de ganancia fue propuesta por un equipo de investigadores de la Universidad de Sevilla (Fiaccini, Álamo, Camacho) para generalizar el modelado politópico, y esta tesis propone una version aún más general de algunos de dichos resultados que incorpora planificación de ganancia.This thesis discusses different modelling methodologies to eke out best performance/stability results than conventional sector-nonlinearity Takagi-Sugeno (also known as quasi-LPV) systems modelling techniques are able to yield. Indeed, even if LMIs can prove various performance and stability bounds (decay rate, $\mathcal H_\infty$, etc.) for polytopic systems, it is well known that the proven performance depends on the chosen model and, given a nonlinear dynamic systems, the polytopic embeddings available for it are not unique. Thus, explorations on how to obtain the model which is less deletereous for performance are presented. As a last contribution, extending the polytopic Takagi-Sugeno setup to a gain-scheduled quasi-convex difference inclusion framework allows to improve the results over the polytopic models. Indeed, the non-scheduled convex difference inclusion framework was proposed by a research team in University of Seville (Fiacchini, Alamo, Camacho) as a generalised modelling methodology which included the polytopic one; this thesis poses a further generalised gain-scheduled version of some of these results.Aquesta tesi discuteix diferents metodologies de modelatge per extreure millors prestacions o resultats d'estabilitat que aquelles que el modelatge convencional basat en sector no-lineal de sistemes Takagi-Sugeno (també anomenats quasi-LPV) és capaç de produir. En efecte, fins i tot si les LMIs poden provar diferents cotes de prestacions o marges d'estabilitat (taxa de decaïment, $\mathcal H_\infty$, etc.) per a sistemes politòpics, és ben conegut que les prestacions provades depenen del model triat i, donat un sistema no-lineal, el dit model politòpic no és únic. Per tant, es presenten exploracions cap a com obtenir el model que és menys perjudicial per a la mesura de prestacions triada. Com una darrera contribució, millors resultats són obtinguts mitjançant l'extensió del modelatge politòpic Takagi-Sugeno a un marc d'inclusions en diferències quasi-convexes amb planificació de guany. En efecte, una versió sense planificació de guany va ser proposada per un equip d'investigadors de la Universitat de Sevilla (Fiaccini, Álamo, Camacho) per a generalitzar el modelatge politòpic, i aquesta tesi proposa una versió més general d'alguns d'aquests resultats que incorpora planificació de guany.Robles Ruiz, R. (2018). Contributions to nonlinear system modelling and controller synthesis via convex structures [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/100848TESI