Late allocation and early release of physical registers

The register file is one of the critical components of current processors in terms of access time and power consumption. Among other things, the potential to exploit instruction-level parallelism is closely related to the size and number of ports of the register file. In conventional register renaming schemes, both register allocation and releasing are conservatively done, the former at the rename stage, before registers are loaded with values, and the latter at the commit stage of the instruction redefining the same register, once registers are not used any more. We introduce VP-LAER, a renaming scheme that allocates registers later and releases them earlier than conventional schemes. Specifically, physical registers are allocated at the end of the execution stage and released as soon as the processor realizes that there will be no further use of them. VP-LAER enhances register utilization, that is, the fraction of allocated registers having a value to be read in the future. Detailed cycle-level simulations show either a significant speedup for a given register file size or a reduction in the register file size for a given performance level, especially for floating-point codes, where the register file pressure is usually high.Peer ReviewedPostprint (published version

Leveraging register windows to reduce physical registers to the bare minimum

Register window is an architectural technique that reduces memory operations required to save and restore registers across procedure calls. Its effectiveness depends on the size of the register file. Such register requirements are normally increased for out-of-order execution because it requires registers for the in-flight instructions, in addition to the architectural ones. However, a large register file has an important cost in terms of area and power and may even affect the cycle time. In this paper, we propose a software/hardware early register release technique that leverage register windows to drastically reduce the register requirements, and hence, reduce the register file cost. Contrary to the common belief that out-of-order processors with register windows would need a large physical register file, this paper shows that the physical register file size may be reduced to the bare minimum by using this novel microarchitecture. Moreover, our proposal has much lower hardware complexity than previous approaches, and requires minimal changes to a conventional register window scheme. Performance studies show that the proposed technique can reduce the number of physical registers to the number of logical registers plus one (minimum number to guarantee forward progress) and still achieve almost the same performance as an unbounded register file.Peer ReviewedPostprint (published version

Energy Efficient Load Latency Tolerance: Single-Thread Performance for the Multi-Core Era

Around 2003, newly activated power constraints caused single-thread performance growth to slow dramatically. The multi-core era was born with an emphasis on explicitly parallel software. Continuing to grow single-thread performance is still important in the multi-core context, but it must be done in an energy efficient way. One significant impediment to performance growth in both out-of-order and in-order processors is the long latency of last-level cache misses. Prior work introduced the idea of load latency tolerance---the ability to dynamically remove miss-dependent instructions from critical execution structures, continue execution under the miss, and re-execute miss-dependent instructions after the miss returns. However, previously proposed designs were unable to improve performance in an energy-efficient way---they introduced too many new large, complex structures and re-executed too many instructions. This dissertation describes a new load latency tolerant design that is both energy-efficient, and applicable to both in-order and out-of-order cores. Key novel features include formulation of slice re-execution as an alternative use of multi-threading support, efficient schemes for register and memory state management, and new pruning mechanisms for drastically reducing load latency tolerance\u27s dynamic execution overheads. Area analysis shows that energy-efficient load latency tolerance increases the footprint of an out-of-order core by a few percent, while cycle-level simulation shows that it significantly improves the performance of memory-bound programs. Energy-efficient load latency tolerance is more energy-efficient than---and synergistic with---existing performance technique like dynamic voltage and frequency scaling (DVFS)

The computational structural mechanics testbed architecture. Volume 4: The global-database manager GAL-DBM

This is the fourth of a set of five volumes which describe the software architecture for the Computational Structural Mechanics Testbed. Derived from NICE, an integrated software system developed at Lockheed Palo Alto Research Laboratory, the architecture is composed of the command language CLAMP, the command language interpreter CLIP, and the data manager GAL. Volumes 1, 2, and 3 (NASA CR's 178384, 178385, and 178386, respectively) describe CLAMP and CLIP and the CLIP-processor interface. Volumes 4 and 5 (NASA CR's 178387 and 178388, respectively) describe GAL and its low-level I/O. CLAMP, an acronym for Command Language for Applied Mechanics Processors, is designed to control the flow of execution of processors written for NICE. Volume 4 describes the nominal-record data management component of the NICE software. It is intended for all users

HW/SW mechanisms for instruction fusion, issue and commit in modern u-processors

In this thesis we have explored the co-designed paradigm to show alternative processor design points. Specifically, we have provided HW/SW mechanisms for instruction fusion, issue and commit for modern processors. We have implemented a co-designed virtual machine monitor that binary translates x86 instructions into RISC like micro-ops. Moreover, the translations are stored as superblocks, which are a trace of basic blocks. These superblocks are further optimized using speculative and non-speculative optimizations. Hardware mechanisms exists in-order to take corrective action in case of misspeculations. During the course of this PhD we have made following contributions. Firstly, we have provided a novel Programmable Functional unit, in-order to speed up general-purpose applications. The PFU consists of a grid of functional units, similar to CCA, and a distributed internal register file. The inputs of the macro-op are brought from the Physical Register File to the internal register file using a set of moves and a set of loads. A macro-op fusion algorithm fuses micro-ops at runtime. The fusion algorithm is based on a scheduling step that indicates whether the current fused instruction is beneficial or not. The micro-ops corresponding to the macro-ops are stored as control signals in a configuration. The macro-op consists of a configuration ID which helps in locating the configurations. A small configuration cache is present inside the Programmable Functional unit, that holds these configurations. In case of a miss in the configuration cache configurations are loaded from I-Cache. Moreover, in-order to support bulk commit of atomic superblocks that are larger than the ROB we have proposed a speculative commit mechanism. For this we have proposed a Speculative commit register map table that holds the mappings of the speculatively committed instructions. When all the instructions of the superblock have committed the speculative state is copied to Backend Register Rename Table. Secondly, we proposed a co-designed in-order processor with with two kinds of accelerators. These FU based accelerators run a pair of fused instructions. We have considered two kinds of instruction fusion. First, we fused a pair of independent loads together into vector loads and execute them on vector load units. For the second kind of instruction fusion we have fused a pair of dependent simple ALU instructions and execute them in Interlock Collapsing ALUs (ICALU). Moreover, we have evaluated performance of various code optimizations such as list-scheduling, load-store telescoping and load hoisting among others. We have compared our co-designed processor with small instruction window out-of-order processors. Thirdly, we have proposed a co-designed out-of-order processor. Specifically we have reduced complexity in two areas. First of all, we have co-designed the commit mechanism, that enable bulk commit of atomic superblocks. In this solution we got rid of the conventional ROB, instead we introduce the Superblock Ordering Buffer (SOB). SOB ensures program order is maintained at the granularity of the superblock, by bulk committing the program state. The program state consists of the register state and the memory state. The register state is held in a per superblock register map table, whereas the memory state is held in gated store buffer and updated in bulk. Furthermore, we have tackled the complexity of Out-of-Order issue logic by using FIFOs. We have proposed an enhanced steering heuristic that fixes the inefficiencies of the existing dependence-based heuristic. Moreover, a mechanism to release the FIFO entries earlier is also proposed that further improves the performance of the steering heuristic.En aquesta tesis hem explorat el paradigma de les màquines issue i commit per processadors actuals. Hem implementat una màquina virtual que tradueix binaris x86 a micro-ops de tipus RISC. Aquestes traduccions es guarden com a superblocks, que en realitat no és més que una traça de virtuals co-dissenyades. En particular, hem proposat mecanismes hw/sw per a la fusió d’instruccions, blocs bàsics. Aquests superblocks s’optimitzen utilitzant optimizacions especualtives i d’altres no speculatives. En cas de les optimizations especulatives es consideren mecanismes per a la gestió de errades en l’especulació. Al llarg d’aquesta tesis s’han fet les següents contribucions: Primer, hem proposat una nova unitat functional programmable (PFU) per tal de millorar l’execució d’aplicacions de proposit general. La PFU està formada per un conjunt d’unitats funcionals, similar al CCA, amb un banc de registres intern a la PFU distribuït a les unitats funcionals que la composen. Les entrades de la macro-operació que s’executa en la PFU es mouen del banc de registres físic convencional al intern fent servir un conjunt de moves i loads. Un algorisme de fusió combina més micro-operacions en temps d’execució. Aquest algorisme es basa en un pas de planificació que mesura el benefici de les decisions de fusió. Les micro operacions corresponents a la macro operació s’emmagatzemen com a senyals de control en una configuració. Les macro-operacions tenen associat un identificador de configuració que ajuda a localitzar d’aquestes. Una petita cache de configuracions està present dintre de la PFU per tal de guardar-les. En cas de que la configuració no estigui a la cache, les configuracions es carreguen de la cache d’instruccions. Per altre banda, per tal de donar support al commit atòmic dels superblocks que sobrepassen el tamany del ROB s’ha proposat un mecanisme de commit especulatiu. Per aquest mecanisme hem proposat una taula de mapeig especulativa dels registres, que es copia a la taula no especulativa quan totes les instruccions del superblock han comitejat. Segon, hem proposat un processador en order co-dissenyat que combina dos tipus d’acceleradors. Aquests acceleradors executen un parell d’instruccions fusionades. S’han considerat dos tipus de fusió d’instructions. Primer, combinem un parell de loads independents formant loads vectorials i els executem en una unitat vectorial. Segon, fusionem parells d’instruccions simples d’alu que són dependents i que s’executaran en una Interlock Collapsing ALU (ICALU). Per altra aquestes tecniques les hem evaluat conjuntament amb diverses optimizacions com list scheduling, load-store telescoping i hoisting de loads, entre d’altres. Aquesta proposta ha estat comparada amb un processador fora d’ordre. Tercer, hem proposat un processador fora d’ordre co-dissenyat efficient reduint-ne la complexitat en dos areas principals. En primer lloc, hem co-disenyat el mecanisme de commit per tal de permetre un eficient commit atòmic del superblocks. En aquesta solució hem substituït el ROB convencional, i en lloc hem introduït el Superblock Ordering Buffer (SOB). El SOB manté l’odre de programa a granularitat de superblock. L’estat del programa consisteix en registres i memòria. L’estat dels registres es manté en una taula per superblock, mentre que l’estat de memòria es guarda en un buffer i s’actulitza atòmicament. La segona gran area de reducció de complexitat considerarada és l’ús de FIFOs a la lògica d’issue. En aquest últim àmbit hem proposat una heurística de distribució que solventa les ineficiències de l’heurística basada en dependències anteriorment proposada. Finalment, i junt amb les FIFOs, s’ha proposat un mecanisme per alliberar les entrades de la FIFO anticipadament

Efficient Scaling of Out-of-Order Processor Resources

Rather than improving single-threaded performance, with the dawn of the multi-core era, processor microarchitects have exploited Moore's law transistor scaling by increasing core density on a chip and increasing the number of thread contexts within a core. However, single-thread performance and efficiency is still very relevant in the power-constrained multi-core era, as increasing core counts do not yield corresponding performance improvements under real thermal and thread-level constraints. This dissertation provides a detailed study of register reference count structures and its application to both conventional and non-conventional, latency tolerant, out-of-order processors. Prior work has incorporated reference counting, but without a detailed implementation or energy model. This dissertation presents a working implementation of reference count structures and shows the overheads are low and can be recouped by the techniques enabled in high-performance out-of-order processors. A study of register allocation algorithms exploits register file occupancy to reduce power consumption by dynamically resizing the register file, which is especially important in the face of wider multi-threaded processors who require larger register files. Latency tolerance has been introduced as a technique to improve single threaded performance by removing cache-miss dependent instructions from the execution pipeline until the miss returns. This dissertation introduces a microarchitecture with a predictive approach to identify long-latency loads, and reduce the energy cost and overhead of scaling the instruction window inherent in latency tolerant microarchitectures. The key features include a front-end predictive slice-out mechanism and in-order queue structure along with mechanisms to reduce the energy cost and register-file usage of executing instructions. Cycle-level simulation shows improved performance and reduced energy delay for memory-bound workloads. Both techniques scale processor resources, addressing register file inefficiency and the allocation of processor resources to instructions during low ILP regions.Ph.D., Computer Engineering -- Drexel University, 201

Mitigating the Effect of Misspeculations in Superscalar Processors

Modern superscalar processors highly rely on the speculative execution which speculatively executes instructions and then verifies. If the prediction is different from the execution result, a misspeculation recovery is performed. Misspeculation recovery penalties still account for a substantial amount of performance reduction. This work focuses on the techniques to mitigate the effect of recovery penalties and proposes practical mechanisms which are thoroughly implemented and analyzed. In general, we can divide the misspeculation penalty into four parts: misspeculation detection delay; stale instruction elimination delay; state restoration delay and pipeline fill delay. This dissertation does not consider the detection delay, instead, we design four innovative mechanisms. Some of these mechanisms target a specific recovery delay whereas others target multiple types of delay in a unified algorithm. Mower was designed to address the stale instruction elimination delay and the state restoration delay by using a special walker. When a misprediction is detected, the walker will scan and repair the instructions which are younger than the mispredicted instruction. During the walking procedure, the correct state is restored and the stale instructions are eliminated. Based on Mower, we further simplify the design and develop a Two-Phase recovery mechanism. This mechanism uses only a basic recovery mechanism except for the case in which the retire stage was stalled by a long latency instruction. When the retire stage is stalled, the second phase is launched and the instructions in the pipeline are re-fetched. Two-Phase mechanism recovers from an earlier point in the program and overlaps the recovery penalty with the long latency penalty. In reality, some of the instructions on the wrong path can be reused during the recovery. However, such reuse of misprediction results is not easy and most of the time involves significant complexity. We design Passing Loop to reduce the pipeline fill delay. We applied our mechanism only for short forward branches which eliminates a substantial amount of complexity. In terms of memory dependence speculation and associated delays due to memory ordering violations, we develop a mechanism that optimizes store-queue-free architectures. A store-queue-free architecture experiences more memory dependence mispredictions due to its aggressive approach to speculations. A common solution is to delay the execution of an instruction which is more likely to be mispredicted. We propose a mechanism to dynamically insert predicates for comparing the address of memory instructions, which is called “Dynamic Memory Dependence Predication” (DMDP). This mechanism boosts the instruction execution to its earliest point and reduces the number of mispredictions

Document flow tracking within corporate networks

Tese de mestrado, Segurança Informática, Universidade de Lisboa, Faculdade de Ciências, 2009Notícias sobre documentos sensíveis publicados na Internet são cada vez mais frequentes nos cabeçalhos da imprensa de hoje em dia. Em Outubro de 2009, o Manual de Segurança do Ministério da Defesa do Reino Unido, com 2389 páginas, que descreve a totalidade do protocolo militar do Reino Unido relativamente a operações e informações de segurança, foi tornado público por acidente. Este é apenas um caso, mas existem exemplos de fugas de informação em praticamente qualquer área, desde a médica à financeira. Estas fugas de informação podem ter consequências sérias para quem seja afectado por elas, como a exposição de segredos de negócio, danos da imagem de marca ou a aplicação de multas elevadas por parte de entidades reguladoras. Uma fuga de informação pode ter várias causas, sendo uma delas devido a empregados que expõem documentos sensíveis para o exterior da empresa, de forma não intencional. Neste trabalho propomos uma solução capaz de rastrear ficheiros numa rede empresarial e detectar situações que podem levar a que um documento sensível se torne público. Fazemos uso de um agente que é instalado nas máquinas que pretendemos monitorizar, que detecta e regista a utilização de ficheiros em operações potencialmente perigosas, como a cópia para um dispositivo amovível ou o envio por correio electrónico como anexo. Essas operações são registadas e recolhidas para uma localização central, onde podemos fazer uso de um motor de correlação para encontrar relações entre diferentes cópias de um mesmo ficheiro. Para finalizar, desenvolvemos e avaliámos um protótipo que implementa a solução proposta, provando que pode efectivamente ser usado para detectar fugas de informação.News about sensitive documents being leaked to the Internet are becoming a commonplace in today’s headlines. In October of 2009, the United Kingdom Ministry of Defense Manual of Security, with 2389 pages, which fully describes the United Kingdom military protocol for all security and counter-intelligence operations, was inadvertently made public. This is only one, but there are examples of information leaks from almost any area, from medical to financial. These information leaks can have serious consequences to those affected by them, such as exposing business secrets, brand damaging or large fines from regulation entities. An information leak can have multiple causes, being one the employee that inadvertently exposes sensitive documents to the exterior of the company. In this work, we propose a solution capable of tracking files within a corporate network and detecting situations that can lead to a sensitive document being leaked to the exterior. We resort to an agent installed on the hosts to be monitored that detects and logs the usage of files by potentially dangerous operations, such as copying it to a removable drive or sending it by e-mail as an attachment. Those operations are logged and collected to a central repository, where we make use of a correlation engine to find relationships between different copies of a same file. Finally, we have developed and evaluated a prototype that implements the proposed solution, proving that it can indeed be used to detect information leaks