NASA space station automation: AI-based technology review

Research and Development projects in automation for the Space Station are discussed. Artificial Intelligence (AI) based automation technologies are planned to enhance crew safety through reduced need for EVA, increase crew productivity through the reduction of routine operations, increase space station autonomy, and augment space station capability through the use of teleoperation and robotics. AI technology will also be developed for the servicing of satellites at the Space Station, system monitoring and diagnosis, space manufacturing, and the assembly of large space structures

Fault and Defect Tolerant Computer Architectures: Reliable Computing With Unreliable Devices

This research addresses design of a reliable computer from unreliable device technologies. A system architecture is developed for a fault and defect tolerant (FDT) computer. Trade-offs between different techniques are studied and yield and hardware cost models are developed. Fault and defect tolerant designs are created for the processor and the cache memory. Simulation results for the content-addressable memory (CAM)-based cache show 90% yield with device failure probabilities of 3 x 10(-6), three orders of magnitude better than non fault tolerant caches of the same size. The entire processor achieves 70% yield with device failure probabilities exceeding 10(-6). The required hardware redundancy is approximately 15 times that of a non-fault tolerant design. While larger than current FT designs, this architecture allows the use of devices much more likely to fail than silicon CMOS. As part of model development, an improved model is derived for NAND Multiplexing. The model is the first accurate model for small and medium amounts of redundancy. Previous models are extended to account for dependence between the inputs and produce more accurate results

Towards a new methodology for design, modelling, and verification of reconfigurable distributed control systems based on a new extension to the IEC 61499 standard

In order to meet user requirements and system environment changes, reconfigurable control systems must dynamically adapt their structure and behaviour without disrupting system operation. IEC 61499 standard provides limited support for the design and verification of such systems. In fact, handling different reconfiguration scenarios at runtime is difficult since function blocks in IEC 61499 cannot be changed at run-time. Hence, this thesis promotes an IEC 61499 extension called reconfigurable function block (RFB) that increases design readability and smoothly switches to the most appropriate behaviour when a reconfiguration event occurs. To ensure system feasibility after reconfiguration, in addition to the qualitative verification, quantitative verification based on probabilistic model checking is addressed in a new RFBA approach. The latter aims to transform the designed RFB model automatically into a generalised reconfigurable timed net condition/event system model (GRTNCES) using a newly developed environment called RFBTool. The GR-TNCES fits well with RFB and preserves its semantic. Using the probabilistic model checker PRISM, the generated GR-TNCES model is checked using defined properties specified in computation tree logic. As a result, an evaluation of system performance and an estimation of reconfiguration risks are obtained. The RFBA methodology is applied on a distributed power system case study.Dynamische Anforderungen und Umgebungen erfordern rekonfigurierbare Anlagen und Steuerungssysteme. Rekonfiguration ermöglicht es einem System, seine Struktur und sein Verhalten an interne oder externe Änderungen anzupassen. Die Norm IEC 61499 wurde entwickelt, um (verteilte) Steuerungssysteme auf Basis von Funktionsbausteinen zu entwickeln. Sie bietet jedoch wenig Unterstützung für Entwurf und Verifikation. Die Tatsache, dass eine Rekonfiguration das System-Ausführungsmodell verändert, erschwert die Entwicklung in IEC 61499 zusätzlich. Daher schlägt diese Dissertation rekonfigurierbare Funktionsbausteine (RFBs) als Erweiterung der Norm vor. Ein RFB verarbeitet über einen Master-Slave-Automaten Rekonfigurationsereignisse und löst das entsprechende Verhalten aus. Diese Hierarchie trennt das Rekonfigurationsmodell vom Steuerungsmodell und vereinfacht so den Entwurf. Die Funktionalität des Entwurfs muss verifiziert werden, damit die Ausführbarkeit des Systems nach einer Rekonfiguration gewährleistet ist. Hierzu wird das entworfene RFB-Modell automatisch in ein generalised reconfigurable timed net condition/event system übersetzt. Dieses wird mit dem Model-Checker PRISM auf qualitative und quantitative Eigenschaften überprüft. Somit wird eine Bewertung der Systemperformanz und eine Einschätzung der Rekonfigurationsrisiken erreicht. Die RFB-Methodik wurde in einem Softwarewerkzeug umgesetzt und in einer Fallstudie auf ein dezentrales Stromnetz angewendet

Heterogeneous Self-Reconfiguring Robotics: Ph.D. Thesis Proposal

Self-reconfiguring robots are modular systems that can change shape, or reconfigure, to match structure to task. They comprise many small, discrete, often identical modules that connect together and that are minimally actuated. Global shape transformation is achieved by composing local motions. Systems with a single module type, known as homogeneous systems, gain fault tolerance, robustness and low production cost from module interchangeability. However, we are interested in heterogeneous systems, which include multiple types of modules such as those with sensors, batteries or wheels. We believe that heterogeneous systems offer the same benefits as homogeneous systems with the added ability to match not only structure to task, but also capability to task. Although significant results have been achieved in understanding homogeneous systems, research in heterogeneous systems is challenging as key algorithmic issues remain unexplored. We propose in this thesis to investigate questions in four main areas: 1) how to classify heterogeneous systems, 2) how to develop efficient heterogeneous reconfiguration algorithms with desired characteristics, 3) how to characterize the complexity of key algorithmic problems, and 4) how to apply these heterogeneous algorithms to perform useful new tasks in simulation and in the physical world. Our goal is to develop an algorithmic basis for heterogeneous systems. This has theoretical significance in that it addresses a major open problem in the field, and practical significance in providing self-reconfiguring robots with increased capabilities

An Adaptive Modular Redundancy Technique to Self-regulate Availability, Area, and Energy Consumption in Mission-critical Applications

As reconfigurable devices\u27 capacities and the complexity of applications that use them increase, the need for self-reliance of deployed systems becomes increasingly prominent. A Sustainable Modular Adaptive Redundancy Technique (SMART) composed of a dual-layered organic system is proposed, analyzed, implemented, and experimentally evaluated. SMART relies upon a variety of self-regulating properties to control availability, energy consumption, and area used, in dynamically-changing environments that require high degree of adaptation. The hardware layer is implemented on a Xilinx Virtex-4 Field Programmable Gate Array (FPGA) to provide self-repair using a novel approach called a Reconfigurable Adaptive Redundancy System (RARS). The software layer supervises the organic activities within the FPGA and extends the self-healing capabilities through application-independent, intrinsic, evolutionary repair techniques to leverage the benefits of dynamic Partial Reconfiguration (PR). A SMART prototype is evaluated using a Sobel edge detection application. This prototype is shown to provide sustainability for stressful occurrences of transient and permanent fault injection procedures while still reducing energy consumption and area requirements. An Organic Genetic Algorithm (OGA) technique is shown capable of consistently repairing hard faults while maintaining correct edge detector outputs, by exploiting spatial redundancy in the reconfigurable hardware. A Monte Carlo driven Continuous Markov Time Chains (CTMC) simulation is conducted to compare SMART\u27s availability to industry-standard Triple Modular Technique (TMR) techniques. Based on nine use cases, parameterized with realistic fault and repair rates acquired from publically available sources, the results indicate that availability is significantly enhanced by the adoption of fast repair techniques targeting aging-related hard-faults. Under harsh environments, SMART is shown to improve system availability from 36.02% with lengthy repair techniques to 98.84% with fast ones. This value increases to five nines (99.9998%) under relatively more favorable conditions. Lastly, SMART is compared to twenty eight standard TMR benchmarks that are generated by the widely-accepted BL-TMR tools. Results show that in seven out of nine use cases, SMART is the recommended technique, with power savings ranging from 22% to 29%, and area savings ranging from 17% to 24%, while still maintaining the same level of availability

Intelligent architecture for automatic resource allocation in computer clusters

As the need for more reporting and assessment of information increase exponentially, computer-based applications consume resources at an alarmingly rapid rate. Therefore, traditional techniques for managing resource allocation, topology and systems need urgent revision. In this paper, we present an intelligent architecture that introduces a new strategy for managing resource discovery, allocation and dynamic reconfiguration at run-time. Our building methodology involves the employment of new types of clustered systems based on large application groupings, each having a master cluster controller. Each controlling engine consists of self-healing intelligent entities that can compensate for a variety of software or hardware problems. We also present evaluation results of extensive experiments in a production environment, which demonstrate the advantages of our approach

A Case Study on Formal Verification of Self-Adaptive Behaviors in a Decentralized System

Self-adaptation is a promising approach to manage the complexity of modern software systems. A self-adaptive system is able to adapt autonomously to internal dynamics and changing conditions in the environment to achieve particular quality goals. Our particular interest is in decentralized self-adaptive systems, in which central control of adaptation is not an option. One important challenge in self-adaptive systems, in particular those with decentralized control of adaptation, is to provide guarantees about the intended runtime qualities. In this paper, we present a case study in which we use model checking to verify behavioral properties of a decentralized self-adaptive system. Concretely, we contribute with a formalized architecture model of a decentralized traffic monitoring system and prove a number of self-adaptation properties for flexibility and robustness. To model the main processes in the system we use timed automata, and for the specification of the required properties we use timed computation tree logic. We use the Uppaal tool to specify the system and verify the flexibility and robustness properties.Comment: In Proceedings FOCLASA 2012, arXiv:1208.432

Advancing automation and robotics technology for the Space Station Freedom and for the US economy

The progress made by levels 1, 2, and 3 of the Office of Space Station in developing and applying advanced automation and robotics technology is described. Emphasis is placed upon the Space Station Freedom Program responses to specific recommendations made in the Advanced Technology Advisory Committee (ATAC) progress report 10, the flight telerobotic servicer, and the Advanced Development Program. Assessments are presented for these and other areas as they apply to the advancement of automation and robotics technology for the Space Station Freedom