A Survey on FPGA-Based Heterogeneous Clusters Architectures

In recent years, the most powerful supercomputers have already reached megawatt power consumption levels, an important issue that challenges sustainability and shows the impossibility of maintaining this trend. To this date, the prevalent approach to supercomputing is dominated by CPUs and GPUs. Given their fixed architectures with generic instruction sets, they have been favored with lots of tools and mature workflows which led to mass adoption and further growth. However, reconfigurable hardware such as FPGAs has repeatedly proven that it offers substantial advantages over this supercomputing approach concerning performance and power consumption. In this survey, we review the most relevant works that advanced the field of heterogeneous supercomputing using FPGAs focusing on their architectural characteristics. Each work was divided into three main parts: network, hardware, and software tools. All implementations face challenges that involve all three parts. These dependencies result in compromises that designers must take into account. The advantages and limitations of each approach are discussed and compared in detail. The classification and study of the architectures illustrate the trade-offs of the solutions and help identify open problems and research lines

Energy Efficient Parallel K-Means Clustering for an Intel Hybrid Multi-Chip Package

International audienceFPGA devices have been proving to be good candidates to accelerate applications from different research topics. For instance, machine learning applications such as K-Means clustering usually relies on large amount of data to be processed, and, despite the performance offered by other architectures, FPGAs can offer better energy efficiency. With that in mind, Intel ® has launched a platform that integrates a multicore and an FPGA in the same package, enabling low latency and coherent fine-grained data offload. In this paper, we present a parallel implementation of the K-Means clustering algorithm, for this novel platform, using OpenCL language, and compared it against other platforms. We found that the CPU+FPGA platform was more energy efficient than the CPU-only approach from 70.71% to 85.92%, with Standard and Tiny input sizes respectively, and up to 68.21% of performance improvement was obtained with Tiny input size. Furthermore, it was up to 7.2× more energy efficient than an Intel® Xeon Phi ™, 21.5× than a cluster of Raspberry Pi boards, and 3.8× than the low-power MPPA-256 architecture, when the Standard input size was used

Exploring manycore architectures for next-generation HPC systems through the MANGO approach

[EN] The Horizon 2020 MANGO project aims at exploring deeply heterogeneous accelerators for use in High-Performance Computing systems running multiple applications with different Quality of Service (QoS) levels. The main goal of the project is to exploit customization to adapt computing resources to reach the desired QoS. For this purpose, it explores different but interrelated mechanisms across the architecture and system software. In particular, in this paper we focus on the runtime resource management, the thermal management, and support provided for parallel programming, as well as introducing three applications on which the project foreground will be validated.This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 671668.Flich Cardo, J.; Agosta, G.; Ampletzer, P.; Atienza-Alonso, D.; Brandolese, C.; Cappe, E.; Cilardo, A.... (2018). Exploring manycore architectures for next-generation HPC systems through the MANGO approach. Microprocessors and Microsystems. 61:154-170. https://doi.org/10.1016/j.micpro.2018.05.011S1541706

Just In Time Assembly (JITA) - A Run Time Interpretation Approach for Achieving Productivity of Creating Custom Accelerators in FPGAs

The reconfigurable computing community has yet to be successful in allowing programmers to access FPGAs through traditional software development flows. Existing barriers that prevent programmers from using FPGAs include: 1) knowledge of hardware programming models, 2) the need to work within the vendor specific CAD tools and hardware synthesis. This thesis presents a series of published papers that explore different aspects of a new approach being developed to remove the barriers and enable programmers to compile accelerators on next generation reconfigurable manycore architectures. The approach is entitled Just In Time Assembly (JITA) of hardware accelerators. The approach has been defined to allow hardware accelerators to be built and run through software compilation and run time interpretation outside of CAD tools and without requiring each new accelerator to be synthesized. The approach advocates the use of libraries of pre-synthesized components that can be referenced through symbolic links in a similar fashion to dynamically linked software libraries. Synthesis still must occur but is moved out of the application programmers software flow and into the initial coding process that occurs when programming patterns that define a Domain Specific Language (DSL) are first coded. Programmers see no difference between creating software or hardware functionality when using the DSL. A new run time interpreter is introduced to assemble the individual pre-synthesized hardware accelerators that comprise the accelerator functionality within a configurable tile array of partially reconfigurable slots at run time. Quantitative results are presented that compares utilization, performance, and productivity of the approach to what would be achieved by full custom accelerators created through traditional CAD flows using hardware programming models and passing through synthesis

Medium access control in wireless network-on-chip: a context analysis

© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.Wireless on-chip communication is a promising candidate to address the performance and efficiency issues that arise when scaling current NoC techniques to manycore processors. A WNoC can serve global and broadcast traffic with ultra-low latency even in thousand-core chips, thus acting as a natural complement to conventional and throughput-oriented wireline NoCs. However, the development of MAC strategies needed to efficiently share the wireless medium among the increasing number of cores remains a considerable challenge given the singularities of the environment and the novelty of the research area. In this position article, we present a context analysis describing the physical constraints, performance objectives, and traffic characteristics of the on-chip communication paradigm. We summarize the main differences with respect to traditional wireless scenarios, and then discuss their implications on the design of MAC protocols for manycore WNoC, with the ultimate goal of kickstarting this arguably unexplored research area.Peer ReviewedPostprint (author's final draft

FIFTY YEARS OF MICROPROCESSOR EVOLUTION: FROM SINGLE CPU TO MULTICORE AND MANYCORE SYSTEMS

Nowadays microprocessors are among the most complex electronic systems that man has ever designed. One small silicon chip can contain the complete processor, large memory and logic needed to connect it to the input-output devices. The performance of today's processors implemented on a single chip surpasses the performance of a room-sized supercomputer from just 50 years ago, which cost over $ 10 million [1]. Even the embedded processors found in everyday devices such as mobile phones are far more powerful than computer developers once imagined. The main components of a modern microprocessor are a number of general-purpose cores, a graphics processing unit, a shared cache, memory and input-output interface and a network on a chip to interconnect all these components [2]. The speed of the microprocessor is determined by its clock frequency and cannot exceed a certain limit. Namely, as the frequency increases, the power dissipation increases too, and consequently the amount of heating becomes critical. So, silicon manufacturers decided to design new processor architecture, called multicore processors [3]. With aim to increase performance and efficiency these multiple cores execute multiple instructions simultaneously. In this way, the amount of parallel computing or parallelism is increased [4]. In spite of mentioned advantages, numerous challenges must be addressed carefully when more cores and parallelism are used.This paper presents a review of microprocessor microarchitectures, discussing their generations over the past 50 years. Then, it describes the currently used implementations of the microarchitecture of modern microprocessors, pointing out the specifics of parallel computing in heterogeneous microprocessor systems. To use efficiently the possibility of multi-core technology, software applications must be multithreaded. The program execution must be distributed among the multi-core processors so they can operate simultaneously. To use multi-threading, it is imperative for programmer to understand the basic principles of parallel computing and parallel hardware. Finally, the paper provides details how to implement hardware parallelism in multicore systems

DCRA: A Distributed Chiplet-based Reconfigurable Architecture for Irregular Applications

In recent years, the growing demand to process large graphs and sparse datasets has led to increased research efforts to develop hardware- and software-based architectural solutions to accelerate them. While some of these approaches achieve scalable parallelization with up to thousands of cores, adaptation of these proposals by the industry remained slow. To help solve this dissonance, we identified a set of questions and considerations that current research has not considered deeply. Starting from a tile-based architecture, we put forward a Distributed Chiplet-based Reconfigurable Architecture (DCRA) for irregular applications that carefully consider fabrication constraints that made prior work either hard or costly to implement or too rigid to be applied. We identify and study pre-silicon, package-time and compile-time configurations that help optimize DCRA for different deployments and target metrics. To enable that, we propose a practical path for manufacturing chip packages by composing variable numbers of DCRA and memory dies, with a software-configurable Torus network to connect them. We evaluate six applications and four datasets, with several configurations and memory technologies, to provide a detailed analysis of the performance, power, and cost of DCRA as a compute node for scale-out sparse data processing. Finally, we present our findings and discuss how DCRA's framework for design exploration can help guide architects to build scalable and cost-efficient systems for irregular applications