Analysis and Life Cycle Assessment of Printed Antennas for Sustainable Wireless Systems

Siirretty Doriast

3D-Printed UHF-RFID Tag for Embedded Applications

This paper presents the design, manufacture and characterization of a novel 3D passive UHF-RFID tag for embedded applications. The prototype is fabricated using additive manufacturing techniques: 3D printing and copper electroplating. The design, manufacturing process and measurement set-up are presented and discussed in detail. We propose a biconical antenna design with spiral strips embedded in the cones to provide compactness without breaking the symmetry of the component and to improve bandwidth. The antenna is matched to a commercial UHF-RFID integrated circuit. We incorporate a packaging design that consists of a dielectric coating, to provide proper operation in different media or surrounding environments with changing electromagnetic properties. The good agreement between experimental results and Finite Element Method simulations allows us to validate the whole process. Finally, a compact capsule-type RFID tag is proposed and its performance in different media is reported

Advanced Radio Frequency Identification Design and Applications

Radio Frequency Identification (RFID) is a modern wireless data transmission and reception technique for applications including automatic identification, asset tracking and security surveillance. This book focuses on the advances in RFID tag antenna and ASIC design, novel chipless RFID tag design, security protocol enhancements along with some novel applications of RFID

Delay line based passive radio frequency identification tags

This work describes the concept, design, fabrication, and characterization of delay-based radio frequency identification (RFID) tags and RFID-based sensor tags, representing a novel RFID technology. The presented delay-based RFID concept is based on the LC-delay-line and transmission-delay-line based approaches. The proposed concept allows the realization of RFIDs and RFID-based sensor tags at any allowed radio frequency, with the limitation of realizing delay elements capable of producing required delays. The RFID configurations presented in this work are for operation at 915 MHz. Simulations are used to design and optimize components and devices that constitute the tags, and to integrate them to realize tags of different configuration. A set of fabrication processes has been developed for the realization of the tag. Characterization and field testing of these tags show that delay-based RFID approach can be used to make passive tags at ultra high frequency (UHF) and other allowed frequencies. Delay-based tags have the advantages of time domain operation, and the feasibility of complying with FCC regulations. However, size, need of isolators and circulator, and design constraints in producing higher number of bits are some of the concerns that need to be further addressed. In summary, this dissertation work presents a viable alternative RFID approach based on the delay line concept. The results obtained show great promise for further development and optimization of this approach for a wide range of commercial applications

RF Energy Harvesting Techniques for Battery-less Wireless Sensing, Industry 4.0 and Internet of Things: A Review

As the Internet of Things (IoT) continues to expand, the demand for the use of energy-efficient circuits and battery-less devices has grown rapidly. Battery-less operation, zero maintenance and sustainability are the desired features of IoT devices in fifth generation (5G) networks and green Industry 4.0 wireless systems. The integration of energy harvesting systems, IoT devices and 5G networks has the potential impact to digitalize and revolutionize various industries such as Industry 4.0, agriculture, food, and healthcare, by enabling real-time data collection and analysis, mitigating maintenance costs, and improving efficiency. Energy harvesting plays a crucial role in envisioning a low-carbon Net Zero future and holds significant political importance. This survey aims at providing a comprehensive review on various energy harvesting techniques including radio frequency (RF), multi-source hybrid and energy harvesting using additive manufacturing technologies. However, special emphasis is given to RF-based energy harvesting methodologies tailored for battery-free wireless sensing, and powering autonomous low-power electronic circuits and IoT devices. The key design challenges and applications of energy harvesting techniques, as well as the future perspective of System on Chip (SoC) implementation, data digitization in Industry 4.0, next-generation IoT devices, and 5G communications are discussed

Doctor of Philosophy

dissertationThree-dimensional (3D) rapid prototyping holds significant promise for future antenna designs. Many complex designs that would be unmanufacturable or costly are realizable on a 3D printing machine. The ability to create 3D designs of virtually any configuration makes it possible to build compact antennas that can form fit to any space. These antennas build on the concept that small antennas can best reach the ideal operating limit when utilizing the entire 3D space in a sphere surrounding the antenna. Antennas require a combination of dielectric and conductive materials. 3D rapid prototyping is already well advanced for plastics and dielectric materials (with more options coming online). Prototyping with conductive materials has lagged behind; due mainly to their higher melting points, but this is advancing as well. This dissertation focuses on 3D rapid prototyping for antenna design. A 3D antenna made from small cubical cells is optimized for 2.4-3GHz using a genetic algorithm (GA). The antennas are built using 3D printing of plastic covered by conductive paint. The effects of the conductivity of the paint and number of layers on the resonance and gain of the antenna are evaluated. These results demonstrate the feasibility of using 3D rapid prototyping for antenna design

Additive Manufacturing for Antenna Applications

This thesis presents methods to make use of additive manufacturing (AM) or 3D printing (3DP) technology for the fabrication of antenna and electromagnetic (EM) structures. A variety of 3DP techniques based on filament, resin, powder and nano-particle inks are applied for the development and fabrication of antennas. Fully and partially metallised 3D printed EM structures are investigated for operation at mainly microwave frequency bands. First, 3D Sierpinski fractal antennas are fabricated using binder jetting printing technique, which is an AM metal powder bed process. It follows with the introduction of a new concept of sensing liquids using and non-planer electromagnetic band gap (EBG) structure is investigated. Such structure can be fabricated with inexpensive fuse filament fabrication (FFF) in combination with conductive paint. As a third method, inkjet printing technology is used for the fabrication of antennas for origami paper applications. The work investigates the feasibility of fabricating foldable antennas for disposable paper drones using low-cost inkjet printing equipment. It then explores the applicability of inkjet printing on a 3D printing substrate through the fabrication of a circularly polarised patch antenna which combines stereolithography (SLA) and inkjet printing technology, both of which use inexpensive machines. Finally, a variety of AM techniques are applied and compared for the production of a diversity WLAN antenna system for customized wrist-worn application