Acute stress response for self-optimizing mechatronic systems

Self-optimizing mechatronic systems react autonomously and flexibly to changing conditions. They are capable of learning and optimize their behavior throughout their life cycle. The paradigm of self-optimization is originally inspired by the behavior of biological systems. The key to the successful development of self-optimizing systems is a conceptual design process that precisely describes the desired system behavior. In the area of mechanical engineering, active principles based on physical effects such as friction or lever are widely used to concretize the construction structure and the behavior. The same approach can be found in the domain of software-engineering with software patterns such as the broker-pattern or the strategy pattern. However there is no appropriate design schema for the development of intelligent mechatronic systems covering the needs to fulfill the paradigm of self-optimization. This article proposes such a schema called Active Patterns for Self-Optimization. It is shown how a catalogue of active patterns can be derived from a set of four basic active patterns. This design approach is validated for a networked mechatronic system in a multiagent setting where the behavior is implemented according to a biologically inspired technique – the neuro-fuzzy learning method.1st IFIP International Conference on Biologically Inspired Cooperative Computing - Mechatronics and Computer ClustersRed de Universidades con Carreras en Informática (RedUNCI

Acute stress response for self-optimizing mechatronic systems

Self-optimizing mechatronic systems react autonomously and flexibly to changing conditions. They are capable of learning and optimize their behavior throughout their life cycle. The paradigm of self-optimization is originally inspired by the behavior of biological systems. The key to the successful development of self-optimizing systems is a conceptual design process that precisely describes the desired system behavior. In the area of mechanical engineering, active principles based on physical effects such as friction or lever are widely used to concretize the construction structure and the behavior. The same approach can be found in the domain of software-engineering with software patterns such as the broker-pattern or the strategy pattern. However there is no appropriate design schema for the development of intelligent mechatronic systems covering the needs to fulfill the paradigm of self-optimization. This article proposes such a schema called Active Patterns for Self-Optimization. It is shown how a catalogue of active patterns can be derived from a set of four basic active patterns. This design approach is validated for a networked mechatronic system in a multiagent setting where the behavior is implemented according to a biologically inspired technique – the neuro-fuzzy learning method.1st IFIP International Conference on Biologically Inspired Cooperative Computing - Mechatronics and Computer ClustersRed de Universidades con Carreras en Informática (RedUNCI

A multi-agent architecture for plug and produce on an industrial assembly platform

YesModern manufacturing companies face increased pressures to adapt to shorter product life cycles and the need to reconfigure more frequently their production systems to offer new product variants. This paper proposes a new multi-agent architecture utilising “plug and produce” principles for configuration and reconfiguration of production systems with minimum human intervention. A new decision-making approach for system reconfiguration based on tasks re-allocation is presented using goal driven methods. The application of the proposed architecture is described with a number of architectural views and its deployment is illustrated using a validation scenario implemented on an industrial assembly platform. The proposed methodology provides an innovative application of a multi-agent control environment and architecture with the objective of significantly reducing the time for deployment and ramp-up of small footprint assembly systems.The reported research has been part of the EU FP7 research project “PRIME

A model-based approach for supporting flexible automation production systems and an agent-based implementaction

158 p.En esta Tesis Doctoral se plantea una arquitectura de gestión genérica y personalizable, capaz de asegurar el cumplimiento de los requisitos de calidad de servicio (QoS) de un sistema de control industrial. Esta arquitectura permite la modificación de los mecanismos de detección y recuperación de los requisitos de QoS en función de diversos tipos de ésta. Como prueba de concepto, la arquitectura de gestión ha sido implementada mediante un middleware basado en sistemas multi-agente. Este middleware proporciona una serie de agentes distribuidos, los cuales se encargan de la monitorización y recuperación de las QoS en caso de su perdida.La incorporación de los mecanismos de reconfiguración incrementa la complejidad de los sistemas de control. Con el fin de facilitar el diseño de estos sistemas, se ha presentado un framework basado en modelos que guía y facilita el diseño de los sistemas de control reconfigurables. Este framework proporciona una serie de herramientas basadas en modelos que permiten la generación automática del código de control del sistema, así como de los mecanismos de monitorización y reconfiguración de los agentes del middleware.La implementación de la arquitectura ha sido validada mediante una serie de escenarios basados en una célula de montaje real

Design, modelling, simulation and integration of cyber physical systems: Methods and applications

The main drivers for the development and evolution of Cyber Physical Systems (CPS) are the reduction of development costs and time along with the enhancement of the designed products. The aim of this survey paper is to provide an overview of different types of system and the associated transition process from mechatronics to CPS and cloud-based (IoT) systems. It will further consider the requirement that methodologies for CPS-design should be part of a multi-disciplinary development process within which designers should focus not only on the separate physical and computational components, but also on their integration and interaction. Challenges related to CPS-design are therefore considered in the paper from the perspectives of the physical processes, computation and integration respectively. Illustrative case studies are selected from different system levels starting with the description of the overlaying concept of Cyber Physical Production Systems (CPPSs). The analysis and evaluation of the specific properties of a sub-system using a condition monitoring system, important for the maintenance purposes, is then given for a wind turbine

Improve the Performance of Industrial Agents using Fog Computing

In the last decade, the market requirements have been increasing by demanding numerous different products being highly customizable. Given this need, the necessity for dynamic and flexible production lines are a high priority to meet this change. A traditional approach is not enough to meet the market demand and due to this, several paradigms have been coined out to try and solve this problem. The proposed approach is related to communication between the shop-floor modules in order to create different products. This work proposes an architecture where an integration layer will join a Multiagent System capable of the more recent production paradigms with legacy hardware that is present in the more traditional factories in order to have different products being produced in the same production line. This architecture that revolves an interface that can be used by the agents in the factory in order to use the hardware modules to create a different product if need be. The main features of this project is the fact that by using datamodels and an interface created, it can be easily plugged new stations with different tools to modify the product thus increasing the amount of products that can be created

Towards Digital Twin-enabled DevOps for CPS providing Architecture-Based Service Adaptation & Verification at Runtime

Industrial Product-Service Systems (IPSS) denote a service-oriented (SO) way of providing access to CPS capabilities. The design of such systems bears high risk due to uncertainty in requirements related to service function and behavior, operation environments, and evolving customer needs. Such risks and uncertainties are well known in the IT sector, where DevOps principles ensure continuous system improvement through reliable and frequent delivery processes. A modular and SO system architecture complements these processes to facilitate IT system adaptation and evolution. This work proposes a method to use and extend the Digital Twins (DTs) of IPSS assets for enabling the continuous optimization of CPS service delivery and the latter's adaptation to changing needs and environments. This reduces uncertainty during design and operations by assuring IPSS integrity and availability, especially for design and service adaptations at CPS runtime. The method builds on transferring IT DevOps principles to DT-enabled CPS IPSS. The chosen design approach integrates, reuses, and aligns the DT processing and communication resources with DevOps requirements derived from literature. We use these requirements to propose a DT-enabled self-adaptive CPS model, which guides the realization of DT-enabled DevOps in CPS IPSS. We further propose detailed design models for operation-critical DTs that integrate CPS closed-loop control and architecture-based CPS adaptation. This integrated approach enables the implementation of A/B testing as a use case and central concept to enable CPS IPSS service adaptation and reconfiguration. The self-adaptive CPS model and DT design concept have been validated in an evaluation environment for operation-critical CPS IPSS. The demonstrator achieved sub-millisecond cycle times during service A/B testing at runtime without causing CPS operation interferences and downtime.Comment: Final published version appearing in 17th Symposium on Software Engineering for Adaptive and Self-Managing Systems (SEAMS 2022

Towards edge robotics: the progress from cloud-based robotic systems to intelligent and context-aware robotic services

Current robotic systems handle a different range of applications such as video surveillance, delivery of goods, cleaning, material handling, assembly, painting, or pick and place services. These systems have been embraced not only by the general population but also by the vertical industries to help them in performing daily activities. Traditionally, the robotic systems have been deployed in standalone robots that were exclusively dedicated to performing a specific task such as cleaning the floor in indoor environments. In recent years, cloud providers started to offer their infrastructures to robotic systems for offloading some of the robot’s functions. This ultimate form of the distributed robotic system was first introduced 10 years ago as cloud robotics and nowadays a lot of robotic solutions are appearing in this form. As a result, standalone robots became software-enhanced objects with increased reconfigurability as well as decreased complexity and cost. Moreover, by offloading the heavy processing from the robot to the cloud, it is easier to share services and information from various robots or agents to achieve better cooperation and coordination. Cloud robotics is suitable for human-scale responsive and delay-tolerant robotic functionalities (e.g., monitoring, predictive maintenance). However, there is a whole set of real-time robotic applications (e.g., remote control, motion planning, autonomous navigation) that can not be executed with cloud robotics solutions, mainly because cloud facilities traditionally reside far away from the robots. While the cloud providers can ensure certain performance in their infrastructure, very little can be ensured in the network between the robots and the cloud, especially in the last hop where wireless radio access networks are involved. Over the last years advances in edge computing, fog computing, 5G NR, network slicing, Network Function Virtualization (NFV), and network orchestration are stimulating the interest of the industrial sector to satisfy the stringent and real-time requirements of their applications. Robotic systems are a key piece in the industrial digital transformation and their benefits are very well studied in the literature. However, designing and implementing a robotic system that integrates all the emerging technologies and meets the connectivity requirements (e.g., latency, reliability) is an ambitious task. This thesis studies the integration of modern Information andCommunication Technologies (ICTs) in robotic systems and proposes some robotic enhancements that tackle the real-time constraints of robotic services. To evaluate the performance of the proposed enhancements, this thesis departs from the design and prototype implementation of an edge native robotic system that embodies the concepts of edge computing, fog computing, orchestration, and virtualization. The proposed edge robotics system serves to represent two exemplary robotic applications. In particular, autonomous navigation of mobile robots and remote-control of robot manipulator where the end-to-end robotic system is distributed between the robots and the edge server. The open-source prototype implementation of the designed edge native robotic system resulted in the creation of two real-world testbeds that are used in this thesis as a baseline scenario for the evaluation of new innovative solutions in robotic systems. After detailing the design and prototype implementation of the end-to-end edge native robotic system, this thesis proposes several enhancements that can be offered to robotic systems by adapting the concept of edge computing via the Multi-Access Edge Computing (MEC) framework. First, it proposes exemplary network context-aware enhancements in which the real-time information about robot connectivity and location can be used to dynamically adapt the end-to-end system behavior to the actual status of the communication (e.g., radio channel). Three different exemplary context-aware enhancements are proposed that aim to optimize the end-to-end edge native robotic system. Later, the thesis studies the capability of the edge native robotic system to offer potential savings by means of computation offloading for robot manipulators in different deployment configurations. Further, the impact of different wireless channels (e.g., 5G, 4G andWi-Fi) to support the data exchange between a robot manipulator and its remote controller are assessed. In the following part of the thesis, the focus is set on how orchestration solutions can support mobile robot systems to make high quality decisions. The application of OKpi as an orchestration algorithm and DLT-based federation are studied to meet the KPIs that autonomously controlledmobile robots have in order to provide uninterrupted connectivity over the radio access network. The elaborated solutions present high compatibility with the designed edge robotics system where the robot driving range is extended without any interruption of the end-to-end edge robotics service. While the DLT-based federation extends the robot driving range by deploying access point extension on top of external domain infrastructure, OKpi selects the most suitable access point and computing resource in the cloud-to-thing continuum in order to fulfill the latency requirements of autonomously controlled mobile robots. To conclude the thesis the focus is set on how robotic systems can improve their performance by leveraging Artificial Intelligence (AI) and Machine Learning (ML) algorithms to generate smart decisions. To do so, the edge native robotic system is presented as a true embodiment of a Cyber-Physical System (CPS) in Industry 4.0, showing the mission of AI in such concept. It presents the key enabling technologies of the edge robotic system such as edge, fog, and 5G, where the physical processes are integrated with computing and network domains. The role of AI in each technology domain is identified by analyzing a set of AI agents at the application and infrastructure level. In the last part of the thesis, the movement prediction is selected to study the feasibility of applying a forecast-based recovery mechanism for real-time remote control of robotic manipulators (FoReCo) that uses ML to infer lost commands caused by interference in the wireless channel. The obtained results are showcasing the its potential in simulation and real-world experimentation.Programa de Doctorado en Ingeniería Telemática por la Universidad Carlos III de MadridPresidente: Karl Holger.- Secretario: Joerg Widmer.- Vocal: Claudio Cicconett