Synthesis of Liveness-Enforcing Petri Net Supervisors Based on a Think-Globally-Act-Locally Approach and a Structurally Minimal Method for Flexible Manufacturing Systems

This paper proposes a deadlock prevention policy for flexible manufacturing systems (FMSs) based on a think-globally-act-locally approach and a structurally minimal method. First, by using the think-globally-act-locally approach, a global idle place is temporarily added to a Petri net model with deadlocks. Then, at each iteration, an integer linear programming problem is formulated to design a minimal number of maximally permissive control places. Therefore, a supervisor with a low structural complexity is obtained since the number of control places is greatly compressed. Finally, by adding the designed supervisor, the resulting net model is optimally or near-optimally controlled. Three examples from the literature are used to illustrate the proposed method

Algoritam za sprječavanje zastoja temeljen na uzastopnoj kontroli sifona Petrijeve mreže

This paper presents a formal calculation method of a deadlock prevention supervisor by the use of Petri nets. The proposed algorithm uses reachability tree to detect deadlock state and iterative siphon control method to synthesize the deadlock prevention supervisor. Such supervisor is maximally permissive and consists of minimal number of control places. The algorithm is intended for reversible or partially reversible P-T Petri net, but it can also be applied to Ordinary Petri nets. The calculation of the supervisor is illustrated by two examples. The first example shows the synthesis of deadlock prevention supervisor in a manufacturing system consisting of three conveyors and three robots, where the deadlock can occur due to concurrent requests of the conveyors for the robot engagements and unpredictable duration of those engagements. The second example shows the synthesis of deadlock prevention supervisor in a marine traffic system, where dangerous vessel deadlock situations may occur in case of vessels\u27 irregular motion through the system. To avoid this, the vessel traffic is supervised and controlled by traffic lights using the deadlock prevention supervisor, which is responsible for vessels\u27 stopping only in the case of dangerous situation and until this situation elapses.Članak opisuje formalnu metodu proračuna nadzornika za sprječavanje zastoja korištenjem Petrijevih mreža. Predloženi algoritam koristi stablo dostupnih stanja za detekciju stanja zastoja i metodu uzastopne kontrole sifona za sintezu nadzornika za sprječavanje zastoja. Nadzornik je najviše dopuštajući i sadrži najmanji broj kontrolnih mjesta. Algoritam je namijenjen za reverzibilne ili djelomično reverzibilne P-T Petrijeve mreže, ali se može koristiti i za obične Petrijeve mreže. Proračun nadzornika pokazan je na dva primjera. Prvi primjer prikazuje sintezu nadzornika za sprječavanje zastoja u fleksibilnom proizvodnom sustavu s tri robota i tri proizvodne trake, gdje se zastoj može dogoditi zbog međusobnog natjecanja transportnih traka za angažiranjem robota te zbog nepredvidljivosti trajanja tih angažmana. Drugi primjer prikazuje sintezu nadzornika u pomorskom prometnom sustavu, gdje se opasne situacije zastoja plovila mogu dogoditi poradi neodgovarajućeg pomicanja plovila kroz sustav. Da bi se to izbjeglo, promet plovila se nadzire i upravlja pomoću svjetlosne signalizacije korištenjem nadzornika za sprječavanje zastoja, koji je odgovoran za zaustavljanje plovila samo u slučaju opasnog stanja te dok to stanje ne nestane

Comparison and Evaluation of Deadlock Prevention Methods for Different Size Automated Manufacturing Systems

In automated manufacturing systems (AMSs), deadlocks problems can arise due to limited shared resources. Petri nets are an effective tool to prevent deadlocks in AMSs. In this paper, a simulation based on existing deadlock prevention policies and different Petri net models are considered to explore whether a permissive liveness-enforcing Petri net supervisor can provide better time performance. The work of simulation is implemented as follows. (1) Assign the time to the controlled Petri net models, which leads to timed Petri nets. (2) Build the Petri net model using MATLAB software. (3) Run and simulate the model, and simulation results are analyzed to determine which existing policies are suitable for different systems. Siphons and iterative methods are used for deadlocks prevention. Finally, the computational results show that the selected deadlock policies may not imply high resource utilization and plant productivity, which have been shown theoretically in previous publications. However, for all selected AMSs, the iterative methods always lead to structurally and computationally complex liveness-enforcing net supervisors compared to the siphons methods. Moreover, they can provide better behavioral permissiveness than siphons methods for small systems. For large systems, a strict minimal siphon method leads to better behavioral permissiveness than the other methods

Deadlock Prevention Policy with Behavioral Optimality or Suboptimality Achieved by the Redundancy Identification of Constraints and the Rearrangement of Monitors

This work develops an iterative deadlock prevention method for a special class of Petri nets that can well model a variety of flexible manufacturing systems. A deadlock detection technique, called mixed integer programming (MIP), is used to find a strict minimal siphon (SMS) in a plant model without a complete enumeration of siphons. The policy consists of two phases. At the first phase, SMSs are obtained by MIP technique iteratively and monitors are added to the complementary sets of the SMSs. For the possible existence of new siphons generated after the first phase, we add monitors with their output arcs first pointed to source transitions at the second phase to avoid new siphons generating and then rearrange the output arcs step by step on condition that liveness is preserved. In addition, an algorithm is proposed to remove the redundant constraints of the MIP problem in this paper. The policy improves the behavioral permissiveness of the resulting net and greatly enhances the structural simplicity of the supervisor. Theoretical analysis and experimental results verify the effectiveness of the proposed method

Strict Minimal Siphon-Based Colored Petri Net Supervisor Synthesis for Automated Manufacturing Systems With Unreliable Resources

Various deadlock control policies for automated manufacturing systems with reliable and shared resources have been developed, based on Petri nets. In practical applications, a resource may be unreliable. Thus, the deadlock control policies proposed in previous studies are not applicable to such applications. This paper proposes a two-step robust deadlock control strategy for systems with unreliable and shared resources. In the first step, a live (deadlock-free) controlled system that does not consider the failure of resources is derived by using strict minimal siphon control. The second step deals with deadlock control issues caused by the failures of the resources. Considering all resource failures, a common recovery subnet based on colored Petri nets is proposed for all resource failures in the Petri net model. The recovery subnet is added to the derived system at the first step to make the system reliable. The proposed method has been tested using an automated manufacturing system deployed at King Saud University.publishedVersio

Contributions to the deadlock problem in multithreaded software applications observed as Resource Allocation Systems

Desde el punto de vista de la competencia por recursos compartidos sucesivamente reutilizables, se dice que un sistema concurrente compuesto por procesos secuenciales está en situación de bloqueo si existe en él un conjunto de procesos que están indefinidamente esperando la liberación de ciertos recursos retenidos por miembros del mismo conjunto de procesos. En sistemas razonablemente complejos o distribuidos, establecer una política de asignación de recursos que sea libre de bloqueos puede ser un problema muy difícil de resolver de forma eficiente. En este sentido, los modelos formales, y particularmente las redes de Petri, se han ido afianzando como herramientas fructíferas que permiten abstraer el problema de asignación de recursos en este tipo de sistemas, con el fin de abordarlo analíticamente y proveer métodos eficientes para la correcta construcción o corrección de estos sistemas. En particular, la teoría estructural de redes de Petri se postula como un potente aliado para lidiar con el problema de la explosión de estados inherente a aquéllos. En este fértil contexto han florecido una serie de trabajos que defienden una propuesta metodológica de diseño orientada al estudio estructural y la correspondiente corrección física del problema de asignación de recursos en familias de sistemas muy significativas en determinados contextos de aplicación, como el de los Sistemas de Fabricación Flexible. Las clases de modelos de redes de Petri resultantes asumen ciertas restricciones, con significado físico en el contexto de aplicación para el que están destinadas, que alivian en buena medida la complejidad del problema. En la presente tesis, se intenta acercar ese tipo de aproximación metodológica al diseño de aplicaciones software multihilo libres de bloqueos. A tal efecto, se pone de manifiesto cómo aquellas restricciones procedentes del mundo de los Sistemas de Fabricación Flexible se muestran demasiado severas para aprehender la versatilidad inherente a los sistemas software en lo que respecta a la interacción de los procesos con los recursos compartidos. En particular, se han de resaltar dos necesidades de modelado fundamentales que obstaculizan la mera adopción de antiguas aproximaciones surgidas bajo el prisma de otros dominios: (1) la necesidad de soportar el anidamiento de bucles no desplegables en el interior de los procesos, y (2) la posible compartición de recursos no disponibles en el arranque del sistema pero que son creados o declarados por un proceso en ejecución. A resultas, se identifica una serie de requerimientos básicos para la definición de un tipo de modelos orientado al estudio de sistemas software multihilo y se presenta una clase de redes de Petri, llamada PC2R, que cumple dicha lista de requerimientos, manteniéndose a su vez respetuosa con la filosofía de diseño de anteriores subclases enfocadas a otros contextos de aplicación. Junto con la revisión e integración de anteriores resultados en el nuevo marco conceptual, se aborda el estudio de propiedades inherentes a los sistemas resultantes y su relación profunda con otros tipos de modelos, la confección de resultados y algoritmos eficientes para el análisis estructural de vivacidad en la nueva clase, así como la revisión y propuesta de métodos de resolución de los problemas de bloqueo adaptadas a las particularidades físicas del dominio de aplicación. Asimismo, se estudia la complejidad computacional de ciertas vertientes relacionadas con el problema de asignación de recursos en el nuevo contexto, así como la traslación de los resultados anteriormente mencionados sobre el dominio de la ingeniería de software multihilo, donde la nueva clase de redes permite afrontar problemas inabordables considerando el marco teórico y las herramientas suministradas para subclases anteriormente explotadas