Design and application of reconfigurable circuits and systems

Open Acces

A Survey of FPGA Optimization Methods for Data Center Energy Efficiency

This article provides a survey of academic literature about field programmable gate array (FPGA) and their utilization for energy efficiency acceleration in data centers. The goal is to critically present the existing FPGA energy optimization techniques and discuss how they can be applied to such systems. To do so, the article explores current energy trends and their projection to the future with particular attention to the requirements set out by the European Code of Conduct for Data Center Energy Efficiency. The article then proposes a complete analysis of over ten years of research in energy optimization techniques, classifying them by purpose, method of application, and impacts on the sources of consumption. Finally, we conclude with the challenges and possible innovations we expect for this sector.Comment: Accepted for publication in IEEE Transactions on Sustainable Computin

Revisiting the high-performance reconfigurable computing for future datacenters

Modern datacenters are reinforcing the computational power and energy efficiency by assimilating field programmable gate arrays (FPGAs). The sustainability of this large-scale integration depends on enabling multi-tenant FPGAs. This requisite amplifies the importance of communication architecture and virtualization method with the required features in order to meet the high-end objective. Consequently, in the last decade, academia and industry proposed several virtualization techniques and hardware architectures for addressing resource management, scheduling, adoptability, segregation, scalability, performance-overhead, availability, programmability, time-to-market, security, and mainly, multitenancy. This paper provides an extensive survey covering three important aspects-discussion on non-standard terms used in existing literature, network-on-chip evaluation choices as a mean to explore the communication architecture, and virtualization methods under latest classification. The purpose is to emphasize the importance of choosing appropriate communication architecture, virtualization technique and standard language to evolve the multi-tenant FPGAs in datacenters. None of the previous surveys encapsulated these aspects in one writing. Open problems are indicated for scientific community as well

An Energy-Efficient Reconfigurable Circuit Switched Network-on-Chip

Network-on-Chip (NoC) is an energy-efficient on-chip communication architecture for multi-tile System-on-Chip (SoC) architectures. The SoC architecture, including its run-time software, can replace inflexible ASICs for future ambient systems. These ambient systems have to be flexible as well as energy-efficient. To find an energy-efficient solution for the communication network we analyze three wireless applications. Based on their communication requirements we observe that revisiting of the circuit switching techniques is beneficial. In this paper we propose a new energy-efficient reconfigurable circuit-switched Network-on-Chip. By physically separating the concurrent data streams we reduce the overall energy consumption. The circuit-switched router has been synthesized and analyzed for its power consumption in 0.13 ¿m technology. A 5-port circuit-switched router has an area of 0.05 mm2 and runs at 1075 MHz. The proposed architecture consumes 3.5 times less energy compared to its packet-switched equivalen

Prime Field ECDSA Signature Processing for Reconfigurable Embedded Systems

Growing ubiquity and safety relevance of embedded systems strengthen the need to protect their functionality against malicious attacks. Communication and system authentication by digital signature schemes is a major issue in securing such systems. This contribution presents a complete ECDSA signature processing system over prime fields for bit lengths of up to 256 on reconfigurable hardware. By using dedicated hardware implementation, the performance can be improved by up to two orders of magnitude compared to microcontroller implementations. The flexible system is tailored to serve as an autonomous subsystem providing authentication transparent for any application. Integration into a vehicle-to-vehicle communication system is shown as an application example

FPGA acceleration of DNA sequence alignment: design analysis and optimization

Existing FPGA accelerators for short read mapping often fail to utilize the complete biological information in sequencing data for simple hardware design, leading to missed or incorrect alignment. In this work, we propose a runtime reconfigurable alignment pipeline that considers all information in sequencing data for the biologically accurate acceleration of short read mapping. We focus our efforts on accelerating two string matching techniques: FM-index and the Smith-Waterman algorithm with the affine-gap model which are commonly used in short read mapping. We further optimize the FPGA hardware using a design analyzer and merger to improve alignment performance. The contributions of this work are as follows. 1. We accelerate the exact-match and mismatch alignment by leveraging the FM-index technique. We optimize memory access by compressing the data structure and interleaving the access with multiple short reads. The FM-index hardware also considers complete information in the read data to maximize accuracy. 2. We propose a seed-and-extend model to accelerate alignment with indels. The FM-index hardware is extended to support the seeding stage while a Smith-Waterman implementation with the affine-gap model is developed on FPGA for the extension stage. This model can improve the efficiency of indel alignment with comparable accuracy versus state-of-the-art software. 3. We present an approach for merging multiple FPGA designs into a single hardware design, so that multiple place-and-route tasks can be replaced by a single task to speed up functional evaluation of designs. We first experiment with this approach to demonstrate its feasibility for different designs. Then we apply this approach to optimize one of the proposed FPGA aligners for better alignment performance.Open Acces

Multi-Softcore Architecture on FPGA

To meet the high performance demands of embedded multimedia applications, embedded systems are integrating multiple processing units. However, they are mostly based on custom-logic design methodology. Designing parallel multicore systems using available standards intellectual properties yet maintaining high performance is also a challenging issue. Softcore processors and field programmable gate arrays (FPGAs) are a cheap and fast option to develop and test such systems. This paper describes a FPGA-based design methodology to implement a rapid prototype of parametric multicore systems. A study of the viability of making the SoC using the NIOS II soft-processor core from Altera is also presented. The NIOS II features a general-purpose RISC CPU architecture designed to address a wide range of applications. The performance of the implemented architecture is discussed, and also some parallel applications are used for testing speedup and efficiency of the system. Experimental results demonstrate the performance of the proposed multicore system, which achieves better speedup than the GPU (29.5% faster for the FIR filter and 23.6% faster for the matrix-matrix multiplication)

AN ARCHITECTURE EVALUATION AND IMPLEMENTATION OF A SOFT GPGPU FOR FPGAs

Embedded and mobile systems must be able to execute a variety of different types of code, often with minimal available hardware. Many embedded systems now come with a simple processor and an FPGA, but not more energy-hungry components, such as a GPGPU. In this dissertation we present FlexGrip, a soft architecture which allows for the execution of GPGPU code on an FPGA without the need to recompile the design. The architecture is optimized for FPGA implementation to effectively support the conditional and thread-based execution characteristics of GPGPU execution without FPGA design recompilation. This architecture supports direct CUDA compilation to a binary which is executable on the FPGA-based GPGPU. Our architecture is customizable, thus providing the FPGA designer with a selection of GPGPU cores which display performance versus area tradeoffs. This dissertation describes the FlexGrip architecture in detail and showcases the benefits by evaluating the design for a collection of five standard CUDA benchmarks which are compiled using standard GPGPU compilation tools. Speedups of 23x, on average, versus a MicroBlaze microprocessor are achieved for designs which take advantage of the conditional execution capabilities offered by FlexGrip. We also show FlexGrip can achieve an 80% average reduction of dynamic energy versus the MicroBlaze microprocessor. The dissertation furthers discussion by exploring application-customized versions of the soft GPGPU, thus exploiting the overlay architecture. We expand the architecture to multiple processors per GPGPU and optimizing away features which are not needed by certain classes of applications. These optimizations, which include the effective use of block RAMs and DSP blocks, are critical to the performance of FlexGrip. By implementing a 2 GPGPU design, we show speedups of 44x on average versus a MicroBlaze microprocessor. Application-customized versions of the soft GPGPU can be used to further reduce dynamic energy consumption by an average of 14%. To complete this thesis, we augmented a GPGPU cycle accurate simulator to emulate FlexGrip and evaluate different levels of cache design spaces. We show performance increases for select benchmarks, however, we also show that 64% and 45% of benchmarks exhibited performance decreases when L1D cache was enabled for the 1 SMP and 2 SMP configurations, and only one benchmark showed performance improvement when the L2 cache was enabled