Effective instruction scheduling techniques for an interleaved cache clustered VLIW processor

Clustering is a common technique to overcome the wire delay problem incurred by the evolution of technology. Fully-distributed architectures, where the register file, the functional units and the data cache are partitioned, are particularly effective to deal with these constraints and besides they are very scalable. In this paper effective instruction scheduling techniques for a clustered VLIW processor with a word-interleaved cache are proposed Such scheduling techniques rely on: (i) loop unrolling and variable alignment to increase the percentage of local accesses, (ii) a latency assignment process to schedule memory operations with an appropriate latency and (iii) different heuristics to assign instructions to clusters. In particular, the number of local accesses is increased by more than 25% if these techniques are used and the ratio of stall time over compute time is small. Next, the main source of remote accesses and stall time is investigated. Stall time is mainly due to remote hits, and Attraction Buffers are used to increase local accesses and reduce stall time. Stall time is reduced by 29% and 34% depending on the scheduling heuristic. IPC results for a word-interleaved cache clustered VLIW processor are similar to those of the multiVLIW (a cache-coherent clustered processor with a more complex hardware design), and are 10% and 5% better (depending on the scheduling heuristic) than the IPC for a clustered processor with a unified cache.Peer ReviewedPostprint (published version

Distributed data cache designs for clustered VLIW processors

Wire delays are a major concern for current and forthcoming processors. One approach to deal with this problem is to divide the processor into semi-independent units referred to as clusters. A cluster usually consists of a local register file and a subset of the functional units, while the L1 data cache typically remains centralized in What we call partially distributed architectures. However, as technology evolves, the relative latency of such a centralized cache will increase, leading to an important impact on performance. In this paper, we propose partitioning the L1 data cache among clusters for clustered VLIW processors. We refer to this kind of design as fully distributed processors. In particular; we propose and evaluate three different configurations: a snoop-based cache coherence scheme, a word-interleaved cache, and flexible LO-buffers managed by the compiler. For each alternative, instruction scheduling techniques targeted to cyclic code are developed. Results for the Mediabench suite'show that the performance of such fully distributed architectures is always better than the performance of a partially distributed one with the same amount of resources. In addition, the key aspects of each fully distributed configuration are explored.Peer ReviewedPostprint (published version

Flexible compiler-managed L0 buffers for clustered VLIW processors

Wire delays are a major concern for current and forthcoming processors. One approach to attack this problem is to divide the processor into semi-independent units referred to as clusters. A cluster usually consists of a local register file and a subset of the functional units, while the data cache remains centralized. However, as technology evolves, the latency of such a centralized cache increase leading to an important performance impact. In this paper, we propose to include flexible low-latency buffers in each cluster in order to reduce the performance impact of higher cache latencies. The reduced number of entries in each buffer permits the design of flexible ways to map data from L1 to these buffers. The proposed L0 buffers are managed by the compiler, which is responsible to decide which memory instructions make us of them. Effective instruction scheduling techniques are proposed to generate code that exploits these buffers. Results for the Mediabench benchmark suite show that the performance of a clustered VLIW processor with a unified L1 data cache is improved by 16% when such buffers are used. In addition, the proposed architecture also shows significant advantages over both MultiVLIW processors and clustered processors with a word-interleaved cache, two state-of-the-art designs with a distributed L1 data cache.Peer ReviewedPostprint (published version

Local scheduling techniques for memory coherence in a clustered VLIW processor with a distributed data cache

Clustering is a common technique to deal with wire delays. Fully-distributed architectures, where the register file, the functional units and the cache memory are partitioned, are particularly effective to deal with these constraints and besides they are very scalable. However the distribution of the data cache introduces a new problem: memory instructions may reach the cache in an order different to the sequential program order, thus possibly violating its contents. In this paper two local scheduling mechanisms that guarantee the serialization of aliased memory instructions are proposed and evaluated: the construction of memory dependent chains (MDC solution), and two transformations (store replication and load-store synchronization) applied to the original data dependence graph (DDGT solution). These solutions do not require any extra hardware. The proposed scheduling techniques are evaluated for a word-interleaved cache clustered VLIW processor (although these techniques can also be used for any other distributed cache configuration). Results for the Mediabench benchmark suite demonstrate the effectiveness of such techniques. In particular, the DDGT solution increases the proportion of local accesses by 16% compared to MDC, and stall time is reduced by 32% since load instructions can be freely scheduled in any cluster However the MDC solution reduces compute time and it often outperforms the former. Finally the impact of both techniques on an architecture with attraction buffers is studied and evaluated.Peer ReviewedPostprint (published version

Improving multithreading performance for clustered VLIW architectures.

Very Long Instruction Word (VLIW) processors are very popular in embedded and mobile computing domain. Use of VLIW processors range from Digital Signal Processors (DSPs) found in a plethora of communication and multimedia devices to Graphics Processing Units (GPUs) used in gaming and high performance computing devices. The advantage of VLIWs is their low complexity and low power design which enable high performance at a low cost. Scalability of VLIWs is limited by the scalability of register file ports. It is not viable to have a VLIW processor with a single large register file because of area and power consumption implications of the register file. Clustered VLIW solve the register file scalability issue by partitioning the register file into multiple clusters and a set of functional units that are attached to register file of that cluster. Using a clustered approach, higher issue width can be achieved while keeping the cost of register file within reasonable limits. Several commercial VLIW processors have been designed using the clustered VLIW model. VLIW processors can be used to run a larger set of applications. Many of these applications have a good Lnstruction Level Parallelism (ILP) which can be efficiently utilized. However, several applications, specially the ones that are control code dominated do not exibit good ILP and the processor is underutilized. Cache misses is another major source of resource underutiliztion. Multithreading is a popular technique to improve processor utilization. Interleaved MultiThreading (IMT) hides cache miss latencies by scheduling a different thread each cycle but cannot hide unused instructions slots. Simultaneous MultiThread (SMT) can also remove ILP under-utilization by issuing multiple threads to fill the empty instruction slots. However, SMT has a higher implementation cost than IMT. The thesis presents Cluster-level Simultaneous MultiThreading (CSMT) that supports a limited form of SMT where VLIW instructions from different threads are merged at a cluster-level granularity. This lowers the hardware implementation cost to a level comparable to the cheap IMT technique. The more complex SMT combines VLIW instructions at the individual operation-level granularity which is quite expensive especially in for a mobile solution. We refer to SMT at operation-level as OpSMT to reduce ambiguity. While previous studies restricted OpSMT on a VLIW to 2 threads, CSMT has a better scalability and upto 8 threads can be supported at a reasonable cost. The thesis proposes several other techniques to further improve CSMT performance. In particular, Cluster renaming remaps the clusters used by instructions of different threads to reduce resource conflicts. Cluster renaming is quite effective in reducing the issue-slots under-utilization and significantly improves CSMT performance.The thesis also proposes: a hybrid between IMT and CSMT which increases the number of supported threads, heterogeneous instruction merging where some instructions are combined using SMT and CSMT rest, and finally, split-issue, a technique that allows to launch partially an instruction making it easier to be combined with others

Hybrid multithreading for VLIW processors

© ACM, 2009. This is the author's version of the work: http://doi.acm.org/10.1145/1629395.1629403Several multithreading techniques have been proposed to reduce resource underutilization in Very Long Instruction Word (VLIW) processors. Simultaneous MultiThreading (SMT) is a popular technique that improves processor performance by issuing multiple instructions from di erent threads. In VLIW processors, SMT requires extra hardware to merge instructions from di erent threads. The complexity of this hardware increases substantially with the number of threads. On the other hand, techniques like Interleaved MultiThreading (IMT) do not need any merging hardware, and support a larger number of threads at reasonable cost. In this paper, we propose Hybrid MultiThreading (HMT), a technique that at each cycle merges instructions from only a subset of threads. HMT supports a reasonable number of threads with a low merging hardware cost. For instance, it is possible to support 8 hardware threads with a merging hardware for only 2 threads. The experimental results show that using HMT improves the multithreading performance significantly. Further, supporting 8 hardware threads with HMT but using a 4-thread merging hardware achieves a performance similar to merging 8 threads simultaneously with a significantly lower merging hardware cost.Peer ReviewedPostprint (author’s final draft

Coarse-grained reconfigurable array architectures

Coarse-Grained Reconfigurable Array (CGRA) architectures accelerate the same inner loops that benefit from the high ILP support in VLIW architectures. By executing non-loop code on other cores, however, CGRAs can focus on such loops to execute them more efficiently. This chapter discusses the basic principles of CGRAs, and the wide range of design options available to a CGRA designer, covering a large number of existing CGRA designs. The impact of different options on flexibility, performance, and power-efficiency is discussed, as well as the need for compiler support. The ADRES CGRA design template is studied in more detail as a use case to illustrate the need for design space exploration, for compiler support and for the manual fine-tuning of source code

Exploring the design space for 3D clustered architectures

Journal Article3D die-stacked chips are emerging as intriguing prospects for the future because of their ability to reduce on-chip wire delays and power consumption. However, they will likely cause an increase in chip operating temperature, which is already a major bottleneck in modern microprocessor design. We believe that 3D will provide the highest performance benefit for high-ILP cores, where wire delays for 2D designs can be substantial. A clustered microarchitecture is an example of a complexity-effective implementation of a high-ILP core. In this paper, we consider 3D organizations of a single-threaded clustered microarchitecture to understand how floorplanning impacts performance and temperature. We first show that delays between the data cache and ALUs are most critical to performance. We then present a novel 3D layout that provides the best balance between temperature and performance. The best-performing 3D layout has 12% higher performance than the best-performing 2D layout

MemPool: A Scalable Manycore Architecture with a Low-Latency Shared L1 Memory

Shared L1 memory clusters are a common architectural pattern (e.g., in GPGPUs) for building efficient and flexible multi-processing-element (PE) engines. However, it is a common belief that these tightly-coupled clusters would not scale beyond a few tens of PEs. In this work, we tackle scaling shared L1 clusters to hundreds of PEs while supporting a flexible and productive programming model and maintaining high efficiency. We present MemPool, a manycore system with 256 RV32IMAXpulpimg "Snitch" cores featuring application-tunable functional units. We designed and implemented an efficient low-latency PE to L1-memory interconnect, an optimized instruction path to ensure each PE's independent execution, and a powerful DMA engine and system interconnect to stream data in and out. MemPool is easy to program, with all the cores sharing a global view of a large, multi-banked, L1 scratchpad memory, accessible within at most five cycles in the absence of conflicts. We provide multiple runtimes to program MemPool at different abstraction levels and illustrate its versatility with a wide set of applications. MemPool runs at 600 MHz (60 gate delays) in typical conditions (TT/0.80V/25{\deg}C) in 22 nm FDX technology and achieves a performance of up to 229 GOPS or 192 GOPS/W with less than 2% of execution stalls.Comment: 14 pages, 17 figures, 2 table