Crossing the death valley to transfer environmental decision support systems to the water market

Environmental decision support systems (EDSSs) are attractive tools to cope with the complexity of environmental global challenges. Several thoughtful reviews have analyzed EDSSs to identify the key challenges and best practices for their development. One of the major criticisms is that a wide and generalized use of deployed EDSSs has not been observed. The paper briefly describes and compares four case studies of EDSSs applied to the water domain, where the key aspects involved in the initial conception and the use and transfer evolution that determine the final success or failure of these tools (i.e., market uptake) are identified. Those aspects that contribute to bridging the gap between the EDSS science and the EDSS market are highlighted in the manuscript. Experience suggests that the construction of a successful EDSS should focus significant efforts on crossing the death-valley toward a general use implementation by society (the market) rather than on development.The authors would like to thank the Catalan Water Agency (Agència Catalana de l’Aigua), Besòs River Basin Regional Administration (Consorci per la Defensa de la Conca del Riu Besòs), SISLtech, and Spanish Ministry of Science and Innovation for providing funding (CTM2012-38314-C02-01 and CTM2015-66892-R). LEQUIA, KEMLG, and ICRA were recognized as consolidated research groups by the Catalan Government under the codes 2014-SGR-1168, 2013-SGR-1304 and 2014-SGR-291.Peer ReviewedPostprint (published version

Waste Water Treatment in New Hampshire: Analysis of Nitrogen Treatment in the Great Bay Community

This thesis addresses and analyzes the challenge of high nitrogen levels in treated wastewater. As fresh water supplies are decreasing, demand for water usage is increasing, as are pollution levels. Wastewater treatment plants are designed to improve the quality of wastewater and allow for future reuse. Although reusing wastewater was initially an innovative solution, many of the treatment plants that were built thirty years ago are now reaching the end of their useful life. This research focuses on the Great Bay community in New Hampshire and analyses the existing systems and accomplishments. Future projects are identified, as well as proposals and prospective developments. The basis of this research is to identify cost effective methods to reduce the levels of nitrogen that are present in the waters of the three municipalities which cover the Great Bay community

Ohio Livestock Waste Management Guide

PDF pages: 3

Municipal wastewater treatment with pond technology : historical review and future outlook

Facing an unprecedented population growth, it is difficult to overstress the assets for wastewater treatment of waste stabilization ponds (WSPs), i.e. high removal efficiency, simplicity, and low cost, which have been recognized by numerous scientists and operators. However, stricter discharge standards, changes in wastewater compounds, high emissions of greenhouse gases, and elevated land prices have led to their replacements in many places. This review aims at delivering a comprehensive overview of the historical development and current state of WSPs, and providing further insights to deal with their limitations in the future. The 21st century is witnessing changes in the way of approaching conventional problems in pond technology, in which WSPs should no longer be considered as a low treatment technology. Advanced models and technologies have been integrated for better design, control, and management. The roles of algae, which have been crucial as solar-powered aeration, will continue being a key solution. Yet, the separation of suspended algae to avoid deterioration of the effluent remains a major challenge in WSPs while in the case of high algal rate pond, further research is needed to maximize algal growth yield, select proper strains, and optimize harvesting methods to put algal biomass production in practice. Significant gaps need to be filled in understanding mechanisms of greenhouse gas emission, climate change mitigation, pond ecosystem services, and the fate and toxicity of emerging contaminants. From these insights, adaptation strategies are developed to deal with new opportunities and future challenges

An Environmental Science and Engineering Framework for Combating Antimicrobial Resistance

On June 20, 2017, members of the environmental engineering and science (EES) community convened at the Association of Environmental Engineering and Science Professors (AEESP) Biennial Conference for a workshop on antimicrobial resistance. With over 80 registered participants, discussion groups focused on the following topics: risk assessment, monitoring, wastewater treatment, agricultural systems, and synergies. In this study, we summarize the consensus among the workshop participants regarding the role of the EES community in understanding and mitigating the spread of antibiotic resistance via environmental pathways. Environmental scientists and engineers offer a unique and interdisciplinary perspective and expertise needed for engaging with other disciplines such as medicine, agriculture, and public health to effectively address important knowledge gaps with respect to the linkages between human activities, impacts to the environment, and human health risks. Recommendations that propose priorities for research within the EES community, as well as areas where interdisciplinary perspectives are needed, are highlighted. In particular, risk modeling and assessment, monitoring, and mass balance modeling can aid in the identification of “hot spots” for antibiotic resistance evolution and dissemination, and can help identify effective targets for mitigation. Such information will be essential for the development of an informed and effective policy aimed at preserving and protecting the efficacy of antibiotics for future generations

On the role of pre and post-processing in environmental data mining

The quality of discovered knowledge is highly depending on data quality. Unfortunately real data use to contain noise, uncertainty, errors, redundancies or even irrelevant information. The more complex is the reality to be analyzed, the higher the risk of getting low quality data. Knowledge Discovery from Databases (KDD) offers a global framework to prepare data in the right form to perform correct analyses. On the other hand, the quality of decisions taken upon KDD results, depend not only on the quality of the results themselves, but on the capacity of the system to communicate those results in an understandable form. Environmental systems are particularly complex and environmental users particularly require clarity in their results. In this paper some details about how this can be achieved are provided. The role of the pre and post processing in the whole process of Knowledge Discovery in environmental systems is discussed

Decision support systems (DSS) for wastewater treatment plants: a review of the state of the art

The use of decision support systems (DSS) allows integrating all the issues related with sustainable developmentin view of providing a useful support to solve multi-scenario problems. In this work an extensive review on theDSSs applied to wastewater treatment plants (WWTPs) is presented. The main aim of the work is to provide anupdated compendium on DSSs in view of supporting researchers and engineers on the selection of the mostsuitable method to address their management/operation/design problems. Results showed that DSSs weremostly used as a comprehensive tool that is capable of integrating several data and a multi-criteria perspective inorder to provide more reliable results. Only one energy-focused DSS was found in literature, while DSSs based onquality and operational issues are very often applied to site-specific conditions. Finally, it would be important toencourage the development of more user-friendly DSSs to increase general interest and usability.This work is part of a research project supported by grant of the Italian Ministry of Education, University and Research (MIUR) through the Research project of national interest PRIN2012 (D.M. 28 December 2012 n. 957/Ric – Prot. 2012PTZAMC) entitled “Energy consumption and Greenhouse Gas (GHG) emissions in the wastewater treatment plants: a decision support system for planning and management – http://ghgfromwwtp.unipa.it” in which the first author is the Principal Investigator. In addition, some coauthors acknowledge the partial support of the Industrial Doctorate Programme (2017-DI-006) and the Research Consolidated Groups/Centres Grant (2017 SGR 574) from the Catalan Agency of University and Research Grants Management (AGAUR), from Catalan Government.Peer ReviewedPostprint (author's final draft

Improved hydrogen gas production in microbial electrolysis cells using inexpensive recycled carbon fibre fabrics

Growing energy demands of wastewater treatment have made it vital for water companies to develop less energy intensive processes for treating wastewater if net zero emissions are to be achieved by 2050. Microbial electrolysis cells (MECs) have the potential to do this by treating water and producing renewable hydrogen gas as a product, but capital and operational costs have slowed their deployment. By using recycled carbon fibre mats, commercially viable MECs can brought closer to reality, where recycled carbon fibre anode MECs treating real wastewater (normalised ~3100 L d−1) were producing 66.77 L H2 d−1 while graphite felt anode MECs produced 3.65 L H2 d−1 per 1 m3 reactor, anodes costing £5.53 m−2 and £88.36 m−2 respectively, resulting in a total anode cost saving of 93%. This could incentivise the development of larger pilot systems, opening the door for generating greater value and a more sustainable wastewater treatment industry

Workstation environment for wastewater treatment design using AI and mathematical models

This research explores the use of computer-based environments to facilitate environmental engineering decision making. A prototype system is developed for wastewater treatment plant design as an exploration tool to demonstrate the techniques and principles proposed. Several mathematical techniques, interactive graphic displays, and friendly user interfaces are used. The mathematical techniques are: (1) mass and water balances for an analysis program for wastewater treatment plant design, (2) a rule-based system for sludge bulking judgment, and (3) a standard processor for checking a design against existing design standards. The interactive graphic displays provide visual data for effective data manipulation, and the friendly user interfaces are designed for engineers who are not necessarily computer experts.U.S. Department of the InteriorU.S. Geological SurveyOpe