Integrating an electronic compass for position tracking on a wheeled tricycle mobile robot

Dead-reckoning via encoders on wheeled-mobile robots is a simple but inaccurate method to estimate position. The major drawback of encoders is wheel slippage errors that accumulate over time. This problem is often addressed by using additional sensors such as compass, gyroscope, or GPS. This paper details the integration and effectiveness of a relatively low-cost solution using an electronic compass to reduce positioning error on a wheeled tricycle mobile robot. A customised Visual Studio program has been developed to adjust the settings of the electronic compass and integrate it with the Visual Studio based robot control system. The electronic compass heading data is fused with the encoder odometry heading data in three different ways: simple fusion, linear weighted fusion, and Kalman filter fusion. Simple fusion and linear weighted fusion rely on parameters determined from angular acceleration and angular velocity, respectively. The Kalman filter uses variance data for the encoders and electronic compass to determine an optimal heading. Experiments have been conducted in an indoor corridor environment to evaluate and compare the various fusion methods. Position error is successfully reduced and is sufficient to locate the robot within the corridor

Coordination and Control for a Team of Mobile Robots in an Unknown Dynamic Environment

This research presents a dual-level control structure for controlling a mobile robot or a group of robots to navigate through a dynamic environment (such as an object is moving in the workspace of a robot). The higher-level controller operates in cooperation with robot’s state estimation and mapping algorithm, Extended Kalman Filter – Simultaneous Localization and Mapping (EKFSLAM), and the lower-level controller (PID) controls the motion of the robot when it, encounters an obstacle, i.e., it reorients the robot to a predefined rebound angle and move it straight to maneuver around the obstacle until the robot is out of the obstacle range. The higher-level controller jumps in as soon as the robot is out of the obstacle range and moves the robot to the goal. The obstacle avoidance technique involves a novel approach to calculate the rebound angle. Further, the research implements the aforementioned technique to a Leader-Follower formation. Simulation and Experimental results have verified the effectiveness of the proposed control law

Evaluation of the Benefits of Zero Velocity Update in Decentralized EKF-Based Cooperative Localization Algorithms for GNSS-Denied Multi-Robot Systems

This paper proposes the cooperative use of zero velocity update (ZU) in a decentralized extended Kalman filter (DEKF) based localization algorithm for multi-robot systems. The filter utilizes inertial measurement unit (IMU), ultra-wideband (UWB), and odometry velocity measurements to improve the localization performance of the system in the presence of a GNSS-denied environment. The contribution of this work is to evaluate the benefits of using ZU in a DEKF-based localization algorithm. The algorithm is tested with real hardware in a video motion capture facility and a Robot Operating System (ROS) based simulation environment for unmanned ground vehicles (UGV). Both simulation and real-world experiments are performed to show the effectiveness of using ZU in one robot to reinstate the localization of other robots in a multi-robot system. Experimental results from GNSS-denied simulation and real-world environments show that using ZU with simple heuristics in the DEKF significantly improves the 3D localization accuracy.Comment: 18 pages, preprint version, the manuscript is accepted for publication in NAVIGATION, the Journal of the Institute of Navigation. Submitted:10-11-2022, Revised: 21-04-2023, Accepted:23-06-202

Comprehensive review on controller for leader-follower robotic system

985-1007This paper presents a comprehensive review of the leader-follower robotics system. The aim of this paper is to find and elaborate on the current trends in the swarm robotic system, leader-follower, and multi-agent system. Another part of this review will focus on finding the trend of controller utilized by previous researchers in the leader-follower system. The controller that is commonly applied by the researchers is mostly adaptive and non-linear controllers. The paper also explores the subject of study or system used during the research which normally employs multi-robot, multi-agent, space flying, reconfigurable system, multi-legs system or unmanned system. Another aspect of this paper concentrates on the topology employed by the researchers when they conducted simulation or experimental studies

Towards autonomous mapping in agriculture: A review of supportive technologies for ground robotics

This paper surveys the supportive technologies currently available for ground mobile robots used for autonomous mapping in agriculture. Unlike previous reviews, we describe state-of-the-art approaches and technologies aimed at extracting information from agricultural environments, not only for navigation purposes but especially for mapping and monitoring. The state-of-the-art platforms and sensors, the modern localization techniques, the navigation and path planning approaches, as well as the potentialities of artificial intelligence towards autonomous mapping in agriculture are analyzed. According to the findings of this review, many examples of recent mobile robots provide full navigation and autonomous mapping capability. Significant resources are currently devoted to this research area, in order to further improve mobile robot capabilities in this complex and challenging field

Diseño de un robot móvil autónomo de telepresencia

The recent rise in tele-operated autonomous mobile vehicles calls for a seamless control architecture that reduces the learning curve when the platform is functioning autonomously (without active supervisory control), as well as when tele-operated. Conventional robot plat-forms usually solve one of two problems. This work develops a mobile base using the Robot Operating System (ROS) middleware for teleoperation at low cost. The three-layer architec-ture introduced adds or removes operator complexity. The lowest layer provides mobility and robot awareness; the second layer provides usability; the upper layer provides inter-activity. A novel interactive control that combines operator intelligence/ skill with robot/autonomous intelligence enabling the mobile base to respond to expected events and ac-tively react to unexpected events is presented. The experiments conducted in the robot laboratory summarises the advantages of using such a system.El reciente auge de los vehículos móviles autónomos teleoperados exige una arquitectura de control sin fisuras que reduzca la curva de aprendizaje cuando la plataforma funciona de forma autónoma (sin control de supervisión activo), así como cuando es teleoperada. Las plataformas robóticas convencionales suelen resolver uno de los dos problemas. Este tra-bajo desarrolla una base móvil que utiliza el middleware Robot Operating System (ROS) para la teleoperación a bajo coste. La arquitectura de tres capas introducida añade o elimina la complejidad del operador. La capa más baja proporciona movilidad y conciencia robótica; la segunda capa proporciona usabilidad; la capa superior proporciona interactividad. Se presenta un novedoso control interactivo que combina la inteligencia/habilidades del op-erador con la inteligencia autónoma del robot, lo que permite que la base móvil responda a los eventos esperados y reaccione activamente a los eventos inesperados. Los experi-mentos realizados en el laboratorio robótica resumen las ventajas de utilizar un sistema de este tipoDepartamento de Ingeniería de Sistemas y AutomáticaMáster en Electrónica Industrial y Automátic

Planetary Rover Inertial Navigation Applications: Pseudo Measurements and Wheel Terrain Interactions

Accurate localization is a critical component of any robotic system. During planetary missions, these systems are often limited by energy sources and slow spacecraft computers. Using proprioceptive localization (e.g., using an inertial measurement unit and wheel encoders) without external aiding is insufficient for accurate localization. This is mainly due to the integrated and unbounded errors of the inertial navigation solutions and the drifted position information from wheel encoders caused by wheel slippage. For this reason, planetary rovers often utilize exteroceptive (e.g., vision-based) sensors. On the one hand, localization with proprioceptive sensors is straightforward, computationally efficient, and continuous. On the other hand, using exteroceptive sensors for localization slows rover driving speed, reduces rover traversal rate, and these sensors are sensitive to the terrain features. Given the advantages and disadvantages of both methods, this thesis focuses on two objectives. First, improving the proprioceptive localization performance without significant changes to the rover operations. Second, enabling adaptive traversability rate based on the wheel-terrain interactions while keeping the localization reliable. To achieve the first objective, we utilized the zero-velocity, zero-angular rate updates, and non-holonomicity of a rover to improve rover localization performance even with the limited available sensor usage in a computationally efficient way. Pseudo-measurements generated from proprioceptive sensors when the rover is stationary conditions and the non-holonomic constraints while traversing can be utilized to improve the localization performance without any significant changes to the rover operations. Through this work, it is observed that a substantial improvement in localization performance, without the aid of additional exteroceptive sensor information. To achieve the second objective, the relationship between the estimation of localization uncertainty and wheel-terrain interactions through slip-ratio was investigated. This relationship was exposed with a Gaussian process with time series implementation by using the slippage estimation while the rover is moving. Then, it is predicted when to change from moving to stationary conditions by mapping the predicted slippage into localization uncertainty prediction. Instead of a periodic stopping framework, the method introduced in this work is a slip-aware localization method that enables the rover to stop more frequently in high-slip terrains whereas stops rover less frequently for low-slip terrains while keeping the proprioceptive localization reliable

Enhanced vision-based localization and control for navigation of non-holonomic omnidirectional mobile robots in GPS-denied environments

New Zealand’s economy relies on primary production to a great extent, where use of the technological advances can have a significant impact on the productivity. Robotics and automation can play a key role in increasing productivity in primary sector, leading to a boost in national economy. This thesis investigates novel methodologies for design, control, and navigation of a mobile robotic platform, aimed for field service applications, specifically in agricultural environments such as orchards to automate the agricultural tasks. The design process of this robotic platform as a non-holonomic omnidirectional mobile robot, includes an innovative integrated application of CAD, CAM, CAE, and RP for development and manufacturing of the platform. Robot Operating System (ROS) is employed for the optimum embedded software system design and development to enable control, sensing, and navigation of the platform. 3D modelling and simulation of the robotic system is performed through interfacing ROS and Gazebo simulator, aiming for off-line programming, optimal control system design, and system performance analysis. Gazebo simulator provides 3D simulation of the robotic system, sensors, and control interfaces. It also enables simulation of the world environment, allowing the simulated robot to operate in a modelled environment. The model based controller for kinematic control of the non-holonomic omnidirectional platform is tested and validated through experimental results obtained from the simulated and the physical robot. The challenges of the kinematic model based controller including the mathematical and kinematic singularities are discussed and the solution to enable an optimal kinematic model based controller is presented. The kinematic singularity associated with the non-holonomic omnidirectional robots is solved using a novel fuzzy logic based approach. The proposed approach is successfully validated and tested through the simulation and experimental results. Development of a reliable localization system is aimed to enable navigation of the platform in GPS-denied environments such as orchards. For this aim, stereo visual odometry (SVO) is considered as the core of the non-GPS localization system. Challenges of SVO are introduced and the SVO accumulative drift is considered as the main challenge to overcome. SVO drift is identified in form of rotational and translational drift. Sensor fusion is employed to improve the SVO rotational drift through the integration of IMU and SVO. A novel machine learning approach is proposed to improve the SVO translational drift using Neural-Fuzzy system and RBF neural network. The machine learning system is formulated as a drift estimator for each image frame, then correction is applied at that frame to avoid the accumulation of the drift over time. The experimental results and analyses are presented to validate the effectiveness of the methodology in improving the SVO accuracy. An enhanced SVO is aimed through combination of sensor fusion and machine learning methods to improve the SVO rotational and translational drifts. Furthermore, to achieve a robust non-GPS localization system for the platform, sensor fusion of the wheel odometry and the enhanced SVO is performed to increase the accuracy of the overall system, as well as the robustness of the non-GPS localization system. The experimental results and analyses are conducted to support the methodology