Efficient resources assignment schemes for clustered multithreaded processors

New feature sizes provide larger number of transistors per chip that architects could use in order to further exploit instruction level parallelism. However, these technologies bring also new challenges that complicate conventional monolithic processor designs. On the one hand, exploiting instruction level parallelism is leading us to diminishing returns and therefore exploiting other sources of parallelism like thread level parallelism is needed in order to keep raising performance with a reasonable hardware complexity. On the other hand, clustering architectures have been widely studied in order to reduce the inherent complexity of current monolithic processors. This paper studies the synergies and trade-offs between two concepts, clustering and simultaneous multithreading (SMT), in order to understand the reasons why conventional SMT resource assignment schemes are not so effective in clustered processors. These trade-offs are used to propose a novel resource assignment scheme that gets and average speed up of 17.6% versus Icount improving fairness in 24%.Peer ReviewedPostprint (published version

Design and validation of a simultaneous multi-threaded DLX processor

technical reportModern day computer systems rely on two forms of parallelism to achieve high performance, parallelism between individual instructions of a program (ILP) and parallelism between individual threads (TLP). Superscalar processors exploit ILP by issuing several instructions per clock, and multiprocessors (MP) exploit TLP by running different threads in parallel on different processors. A fundamental imitation of these approaches to exploit parallelism is that processor resources are statically partitioned. If TLP is low, processors in a MP system will be idle, and if ILP is low, issue slots in a superscalar processor will be wasted. As a consequence, the hardware cannot adapt to changing levels of ILP and TLP and resource utilization tend to be low. Since resource utilization is low there is potential to achieve higher performance if somehow useful instructions could be found to fill up the wasted issue slots. This paper explores a method called simultaneous multithreading (SMT) that addresses the utilization problem by letting multiple threads compete for the resources of a single processor each clock cycle thus increasing the potential ILP available

Efficient memory-level parallelism extraction with decoupled strands

We present Outrider, an architecture for throughput-oriented processors that exploits intra-thread memory-level parallelism (MLP) to improve performance efficiency on highly threaded workloads. Outrider enables a single thread of execution to be presented to the architecture as multiple decoupled instruction streams, consisting of either memory accessing or memory consuming instructions. The key insight is that by decoupling the instruction streams, the processor pipeline can expose MLP in a way similar to out-of-order designs while relying on a low-complexity in-order micro-architecture. Instead of adding more threads as is done in modern GPUs, Outrider can expose the same MLP with fewer threads and reduced contention for resources shared among threads. We demonstrate that Outrider can outperform single-threaded cores by 23-131% and a 4-way simultaneous multi-threaded core by up to 87% in data parallel applications in a 1024-core system. Outrider achieves these performance gains without incurring the overhead of additional hardware thread contexts, which results in improved efficiency compared to a multi-threaded core

Exploiting different levels of parallelism in the biological sequence comparison problem

In the last years the fast growth of bioinformatics field has atracted the attention of computer scientists. At the same time, de exponential growth of databases that contains biological information (such as protein and DNA data) demands great efforts to improve the performance of computational platforms. In this work, we investigate how bioinformatics applications benefit from parallel architectures that combine different alternatives to exploit coarse- and fine-grain parallelism. As a case of analysis, we study the performance behavior of the Ssearch application that implements the Smith-Waterman algorithm (SW), which is a dynamic programing approach that explores the similarity between a pair of sequences. The inherent large parallelism of the application makes it ideal for architectures supporting multiple dimensions of parallelism (thread-level parallelism, TLP; data-level parallelism, DLP; instruction-level parallelism, ILP). We study how this algorithm can take advantage of different parallel machines like the SGI Altix, IBM Power6, IBM Cell BE and MareNostrum machines. Our study includes a qualitative analysis of the parallelization opportunities and also the quantification of the performance in terms of speedup and execution time. These measures are collected taking into account the specific characteristics of each architecture. As an example, our results show that a share memory multiprocessor architecture (SMP) like the PowerPC 970MP of Marenostrum machine can surpasses a heterogeneous multi- processor machine like the current IBM Cell BE.Peer ReviewedPostprint (published version

Introducing runahead threads

Simultaneous Multithreading processors share their resources among multiple threads in order to improve performance. However, a resource control policy is needed to avoid resource conflicts and prevent some threads from monopolizing them. On the contrary, resource conflicts would cause other threads to suffer from resource starvation degrading the overall performance. This situation is especially sensitive for memory bounded threads, because they hold an important amount of resources while long latency accesses are being served. Several fetch policies and resource control techniques have been proposed to overcome these problems by limiting the per-thread resource utilization. Nevertheless, this limitation is harmful for memory bounded threads because it restricts the memory level parallelism available that hides the long latency memory accesses. In this paper, we propose Runahead threads on SMT scenarios as a valuable solution for both exploiting the memory-level parallelism and reducing the resource contention. This approach switches a memory-bounded eager resource thread to a speculative light thread, avoiding critical resource blocking among multiple threads. Furthermore, it improves the thread-level parallelism by removing long-latency memory operations from the instruction window, releasing busy resources. We compare an SMT architecture using Runahead threads (SMTRA) to both state-of-the-art static fetch and dynamic resource control policies. Our results show that the SMTRA combination performs better, in terms of throughput and fairness, than any of the other policies.Postprint (published version

Investigation of a simultaneous multithreaded architecture

Many enhancements have been made to the traditional general purpose load-store computer architectures. Among the enhancements are memory hierarchy improvements, branch prediction, and multiple issue processors. A major problem that exists with current microprocessor design is the disparity in the much larger increase in speed of the CPU versus the moderate increase in speed accessing main memory. The simultaneous multithreaded architecture is an extension of the single-threaded architecture that helps hide the performance penalty created by long-latency instructions, branch mispredictions, and memory accesses. Simultaneous multithreaded architectures use a more flexible parallelism, which takes advantage of both instruction-level, and thread-level parallelism. The goal of this project was to design, simulate, and analyze a model of a simultaneous multithreaded architecture in order to evaluate design alternatives. The simulator was created by modifying a version of the Simple Scalar toolset, developed at the University of Wisconsin. The simulations provide documentation for an overall system performance improvement of a simulta neous multithreaded architecture. In early simulation results, performed with the same number of functional units, an improvement in the number of instructions per cycle (IPC) of between 43% and 58% was found using four threads versus a single thread. The horizontal waste rate, which measures the number of unused issue slots, was reduced between 35% and 46%. The vertical waste rate, which measures the percentage- of unused issue cycles (no issue slots used in a cycle), was reduced between 46% and 61%. These results are derived from a set of four sample programs. It was also found that increasing the number of certain functional units did not improve performance, whereas increasing the number of other types of functional units did have a significant positive impact on performance

Mitosis based speculative multithreaded architectures

In the last decade, industry made a right-hand turn and shifted towards multi-core processor designs, also known as Chip-Multi-Processors (CMPs), in order to provide further performance improvements under a reasonable power budget, design complexity, and validation cost. Over the years, several processor vendors have come out with multi-core chips in their product lines and they have become mainstream, with the number of cores increasing in each processor generation. Multi-core processors improve the performance of applications by exploiting Thread Level Parallelism (TLP) while the Instruction Level Parallelism (ILP) exploited by each individual core is limited. These architectures are very efficient when multiple threads are available for execution. However, single-thread sections of code (single-thread applications and serial sections of parallel applications) pose important constraints on the benefits achieved by parallel execution, as pointed out by Amdahl’s law. Parallel programming, even with the help of recently proposed techniques like transactional memory, has proven to be a very challenging task. On the other hand, automatically partitioning applications into threads may be a straightforward task in regular applications, but becomes much harder for irregular programs, where compilers usually fail to discover sufficient TLP. In this scenario, two main directions have been followed in the research community to take benefit of multi-core platforms: Speculative Multithreading (SpMT) and Non-Speculative Clustered architectures. The former splits a sequential application into speculative threads, while the later partitions the instructions among the cores based on data-dependences but avoid large degree of speculation. Despite the large amount of research on both these approaches, the proposed techniques so far have shown marginal performance improvements. In this thesis we propose novel schemes to speed-up sequential or lightly threaded applications in multi-core processors that effectively address the main unresolved challenges of previous approaches. In particular, we propose a SpMT architecture, called Mitosis, that leverages a powerful software value prediction technique to manage inter-thread dependences, based on pre-computation slices (p-slices). Thanks to the accuracy and low cost of this technique, Mitosis is able to effectively parallelize applications even in the presence of frequent dependences among threads. We also propose a novel architecture, called Anaphase, that combines the best of SpMT schemes and clustered architectures. Anaphase effectively exploits ILP, TLP and Memory Level Parallelism (MLP), thanks to its unique finegrain thread decomposition algorithm that adapts to the available parallelism in the application

Mitosis based speculative multithreaded architectures

In the last decade, industry made a right-hand turn and shifted towards multi-core processor designs, also known as Chip-Multi-Processors (CMPs), in order to provide further performance improvements under a reasonable power budget, design complexity, and validation cost. Over the years, several processor vendors have come out with multi-core chips in their product lines and they have become mainstream, with the number of cores increasing in each processor generation. Multi-core processors improve the performance of applications by exploiting Thread Level Parallelism (TLP) while the Instruction Level Parallelism (ILP) exploited by each individual core is limited. These architectures are very efficient when multiple threads are available for execution. However, single-thread sections of code (single-thread applications and serial sections of parallel applications) pose important constraints on the benefits achieved by parallel execution, as pointed out by Amdahl’s law. Parallel programming, even with the help of recently proposed techniques like transactional memory, has proven to be a very challenging task. On the other hand, automatically partitioning applications into threads may be a straightforward task in regular applications, but becomes much harder for irregular programs, where compilers usually fail to discover sufficient TLP. In this scenario, two main directions have been followed in the research community to take benefit of multi-core platforms: Speculative Multithreading (SpMT) and Non-Speculative Clustered architectures. The former splits a sequential application into speculative threads, while the later partitions the instructions among the cores based on data-dependences but avoid large degree of speculation. Despite the large amount of research on both these approaches, the proposed techniques so far have shown marginal performance improvements. In this thesis we propose novel schemes to speed-up sequential or lightly threaded applications in multi-core processors that effectively address the main unresolved challenges of previous approaches. In particular, we propose a SpMT architecture, called Mitosis, that leverages a powerful software value prediction technique to manage inter-thread dependences, based on pre-computation slices (p-slices). Thanks to the accuracy and low cost of this technique, Mitosis is able to effectively parallelize applications even in the presence of frequent dependences among threads. We also propose a novel architecture, called Anaphase, that combines the best of SpMT schemes and clustered architectures. Anaphase effectively exploits ILP, TLP and Memory Level Parallelism (MLP), thanks to its unique finegrain thread decomposition algorithm that adapts to the available parallelism in the application.Postprint (published version

On the automated compilation of UML notation to a VLIW chip multiprocessor

With the availability of more and more cores within architectures the process of extracting implicit and explicit parallelism in applications to fully utilise these cores is becoming complex. Implicit parallelism extraction is performed through the inclusion of intelligent software and hardware sections of tool chains although these reach their theoretical limit rather quickly. Due to this the concept of a method of allowing explicit parallelism to be performed as fast a possible has been investigated. This method enables application developers to perform creation and synchronisation of parallel sections of an application at a finer-grained level than previously possible, resulting in smaller sections of code being executed in parallel while still reducing overall execution time. Alongside explicit parallelism, a concept of high level design of applications destined for multicore systems was also investigated. As systems are getting larger it is becoming more difficult to design and track the full life-cycle of development. One method used to ease this process is to use a graphical design process to visualise the high level designs of such systems. One drawback in graphical design is the explicit nature in which systems are required to be generated, this was investigated, and using concepts already in use in text based programming languages, the generation of platform-independent models which are able to be specialised to multiple hardware architectures was developed. The explicit parallelism was performed using hardware elements to perform thread management, this resulted in speed ups of over 13 times when compared to threading libraries executed in software on commercially available processors. This allowed applications with large data dependent sections to be parallelised in small sections within the code resulting in a decrease of overall execution time. The modelling concepts resulted in the saving of between 40-50% of the time and effort required to generate platform-specific models while only incurring an overhead of up to 15% the execution cycles of these models designed for specific architectures