776 research outputs found
Production Scheduling
Generally speaking, scheduling is the procedure of mapping a set of tasks or jobs (studied objects) to a set of target resources efficiently. More specifically, as a part of a larger planning and scheduling process, production scheduling is essential for the proper functioning of a manufacturing enterprise. This book presents ten chapters divided into five sections. Section 1 discusses rescheduling strategies, policies, and methods for production scheduling. Section 2 presents two chapters about flow shop scheduling. Section 3 describes heuristic and metaheuristic methods for treating the scheduling problem in an efficient manner. In addition, two test cases are presented in Section 4. The first uses simulation, while the second shows a real implementation of a production scheduling system. Finally, Section 5 presents some modeling strategies for building production scheduling systems. This book will be of interest to those working in the decision-making branches of production, in various operational research areas, as well as computational methods design. People from a diverse background ranging from academia and research to those working in industry, can take advantage of this volume
Reusable modelling and simulation of flexible manufacturing for next generation semiconductor manufacturing facilities
Automated material handling systems (AMHS) in 300 mm semiconductor manufacturing facilities may need to evolve faster than expected considering the high performance demands on these facilities. Reusable simulation models are needed to cope with the demands of this dynamic environment and to deliver answers to the industry much faster. One vision for intrabay AMHS is to link a small group of intrabay AMHS systems, within a full manufacturing facility, together using what is called a Merge/Diverge link. This promises better operational performance of the AMHS when compared to operating two dedicated AMHS systems, one for interbay transport and the other for intrabay handling. A generic tool for modelling and simulation of an intrabay AMHS (GTIA-M&S) is built, which utilises a library of different blocks representing the different components of any intrabay material handling system. GTIA-M&S provides a means for rapid building and analysis of an intrabay AMHS under different operating conditions. The ease of use of the tool means that inexpert users have the ability to generate good models. Models developed by the tool can be executed with the merge/diverge capability enabled or disabled to provide comparable solutions to production demands and to compare these two different configurations of intrabay AMHS using a single simulation model. Finally, results from simulation experiments on a model developed using the tool were very informative in that they include useful decision making data, which can now be used to further enhance and update the design and operational characteristics of the intrabay AMHS
Intelligent shop scheduling for semiconductor manufacturing
Semiconductor market sales have expanded massively to more than 200 billion dollars annually accompanied by increased pressure on the manufacturers to provide higher quality products at lower cost to remain competitive. Scheduling of semiconductor manufacturing is one of the keys to increasing productivity, however the complexity of manufacturing high capacity semiconductor devices and the cost considerations mean that it is impossible to experiment within the facility. There is an immense need for effective decision support models, characterizing and analyzing the manufacturing process, allowing the effect of changes in the production environment to be predicted in order to increase utilization and enhance system performance. Although many simulation models have been developed within semiconductor manufacturing very little research on the simulation of the photolithography process has been reported even though semiconductor manufacturers have recognized that the scheduling of photolithography is one of the most important and challenging tasks due to complex nature of the process.
Traditional scheduling techniques and existing approaches show some benefits for solving small and medium sized, straightforward scheduling problems. However, they have had limited success in solving complex scheduling problems with stochastic elements in an economic timeframe. This thesis presents a new methodology combining advanced solution approaches such as simulation, artificial intelligence, system modeling and Taguchi methods, to schedule a photolithography toolset. A new structured approach was developed to effectively support building the simulation models. A single tool and complete toolset model were developed using this approach and shown to have less than 4% deviation from actual production values. The use of an intelligent scheduling agent for the toolset model shows an average of 15% improvement in simulated throughput time and is currently in use for scheduling the photolithography toolset in a manufacturing plant
Intelligent production control for time-constrained complex job shops
Im Zuge der zunehmenden KomplexitĂ€t der Produktion wird der Wunsch nach einer intelligenten Steuerung der AblĂ€ufe in der Fertigung immer gröĂer. Sogenannte Complex Job Shops bezeichnen dabei die komplexesten Produktionsumgebungen, die deshalb ein hohes MaĂ an AgilitĂ€t in der Steuerung erfordern. Unter diesen Umgebungen sticht die besonders Halbleiterfertigung hervor, da sie alle KomplexitĂ€ten eines Complex Job-Shop vereint. Deshalb ist die operative Exzellenz der SchlĂŒssel zum Erfolg in der Halbleiterindustrie. Diese Exzellenz hĂ€ngt ganz entscheidend von einer intelligenten Produktionssteuerung ab. Ein Hauptproblem bei der Steuerung solcher Complex Job-Shops, in diesem Fall der Halbleiterfertigung, ist das Vorhandensein von ZeitbeschrĂ€nkungen (sog. time-constraints), die die Transitionszeit von Produkten zwischen zwei, meist aufeinanderfolgenden, Prozessen begrenzen. Die Einhaltung dieser produktspezifischen Zeitvorgaben ist von gröĂter Bedeutung, da VerstöĂe zum Verlust des betreffenden Produkts fĂŒhren. Der Stand der Technik bei der Produktionssteuerung dieser Dispositionsentscheidungen, die auf die Einhaltung der Zeitvorgaben abzielen, basiert auf einer fehleranfĂ€lligen und fĂŒr die Mitarbeiter belastenden manuellen Steuerung. In dieser Arbeit wird daher ein neuartiger, echtzeitdatenbasierter Ansatz zur intelligenten Steuerung der Produktionssteuerung fĂŒr time-constrained Complex Job Shops vorgestellt. Unter Verwendung einer jederzeit aktuellen Replikation des realen Systems werden sowohl je ein uni-, multivariates Zeitreihenmodell als auch ein digitaler Zwilling genutzt, um Vorhersagen ĂŒber die Verletzung dieser time-constraints zu erhalten. In einem zweiten Schritt wird auf der Grundlage der Erwartung von ZeitĂŒberschreitungen die Produktionssteuerung abgeleitet und mit Echtzeitdaten anhand eines realen Halbleiterwerks implementiert. Der daraus resultierende Ansatz wird gemeinsam mit dem Stand der Technik validiert und zeigt signifikante Verbesserungen, da viele Verletzungen von time-constraints verhindert werden können. ZukĂŒnftig soll die intelligente Produktionssteuerung daher in weiteren Complex Job Shop-Umgebungen evaluiert und ausgerollt werden
Recommended from our members
Controlling work in process during semiconductor assembly and test operations
In the semiconductor industry, products go through a series of steps over a three- to four-month period that begins with the fabrication of chips and ends with assembly and test (AT) and shipment. This paper introduces a mid-term planning model for scheduling AT operations aimed at minimizing the difference between customer demand and product completions each day. A secondary objective is to maximize daily throughput. Typically, semiconductor companies have 1000s of products or devices in their catalog that can be organized into unique groups of up to 100 devices each. This simplifies the planning process because it is only necessary to consider the groups as a whole rather than the individual devices when constructing schedules.
In all, we developed and tested three related models. Each provides daily run rates at each processing step or logpoint for each device group for up to one month at a time. The models are distinguished by how cycle time is treated. The first takes a steady-state approach and uses Littleâs Law to formulate a WIP target constraint based on the average cycle time at each processing step. The second and third include integer and fractional cycle times in the variable definitions. To find solutions, raw production data are analyzed in a preprocessing step and then converted to input files in a standard format. FlopC++ from the COIN-OR open source software project is used to write and solve the model. Testing was done using three datasets from the Taiwan AT facility of a global semiconductor firm. By comparing model output with historical data for 6 device groups and 33 logpoints, we were able to realize decreases in shortages of up to 40% per month.Mechanical Engineerin
Recommended from our members
Simulation and optimization techniques applied in semiconductor assembly and test operations
The importance of back-end operations in semiconductor manufacturing has been growing steadily in the face of higher customer expectations and stronger competition in the industry. In order to achieve low cycle times, high throughput, and high utilization while improving due-date performance, more effective tools are needed to support machine setup and lot dispatching decisions. In previous work, the problem of maximizing the weighted throughput of lots undergoing assembly and test (AT), while ensuring that critical lots are given priority, was investigated and a greedy randomized adaptive search procedure (GRASP) developed to find solutions. Optimization techniques have long been used for scheduling manufacturing operations on a daily basis. Solutions provide a prescription for machine setups and job processing over a finite the planning horizon. In contrast, simulation provides more detail but in a normative sense. It tells you how the system will evolve in real time for a given demand, a given set of resources and rules for using them. A simulation model can also accommodate changeovers, initial setups and multi-pass requirements easily. The first part of the research is to show how the results of an optimization model can be integrated with the decisions made within a simulation model. The problem addressed is defined in terms of four hierarchical objectives: minimize the weighted sum of key device shortages, maximize weighted throughput, minimize the number of machines used, and minimize makespan for a given set of lots in queue, and a set of resources that includes machines and tooling. The facility can be viewed as a reentrant flow shop. The basic simulation was written in AutoSched AP (ASAP) and then enhanced with the help of customization features available in the software. Several new dispatch rules were developed. Rule_First_setup is able to initialize the simulation with the setups obtained with the GRASP. Rule_All_setups enables a machine to select the setup provided by the optimization solution whenever a decision is about to be made on which setup to choose subsequent to the initial setup. Rule_Hotlot was also proposed to prioritize the processing of the hot lots that contain key devices. The objective of the second part of the research is to design and implement heuristics within the simulation model to schedule back-end operations in a semiconductor AT facility. Rule_Setupnum lets the machines determine which key device to process according to a machine setup frequency table constructed from the GRASP solution. GRASP_asap embeds a more robust selection features of GRASP in the ASAP model through customization. This allows ASAP to explore a larger portion of the feasible region at each decision point by randomizing machine setups using adaptive probability distributions that are a function of solution quality. Rule_Greedy, which is a simplification of GRASP_asap, always picks the setup for a particular machine that gives the greatest marginal improvement in the objective function among all candidates. The purpose of the third part of the research is to statistically validate the relative effectiveness of our top six dispatch rules by comparing their performance on 30 real and randomly generated data sets. Using both GRASP and our ASAP discrete event simulation model, we have (1) identified the general order of dispatch rule performance, (2) investigated the impact of having setups installed on machines at time zero on rule performance, (3) determined the conditions under which restricting the maximum number of changeover affects the rule performance, and (4) studied the factors that might simultaneously affect rule performance with the help of a common random numbers experimental design. In the analysis, the first two objectives, weighted key device shortages and weighted throughput, are used to measure outcomes.Operations Research and Industrial Engineerin
10102 Abstracts Collection -- Grand Challenges for Discrete Event Logistics Systems
From 03/08/2010 to 03/12/2010, the Dagstuhl Seminar 10102 ``Grand Challenges for Discrete Event Logistics Systems\u27\u27 was held in Schloss Dagstuhl~--~Leibniz Center for Informatics.
During the seminar, several participants presented their current
research, and ongoing work and open problems were discussed. Abstracts of
the presentations given during the seminar as well as abstracts of
seminar results and ideas are put together in this paper. The first section
describes the seminar topics and goals in general.
Links to extended abstracts or full papers are provided, if available
Integrating Preventive Maintenance Planning and Production Scheduling under Reentrant Job Shop
This paper focuses on a preventive maintenance plan and production scheduling problem under reentrant Job Shop in semiconductor production. Previous researches discussed production scheduling and preventive maintenance plan independently, especially on reentrant Job Shop. Due to reentrancy, reentrant Job Shop scheduling is more complex than the standard Job Shop which belongs to NP-hard problems. Reentrancy is a typical characteristic of semiconductor production. What is more, the equipment of semiconductor production is very expensive. Equipment failure will affect the normal production plan. It is necessary to maintain it regularly. So, we establish an integrated and optimal mathematical model. In this paper, we use the hybrid particle swarm optimization algorithm to solve the problem for it is highly nonlinear and discrete. The proposed model is evaluated through some simple simulation experiments and the results show that the model works better than the independent decision-making model in terms of minimizing maximum completion time
A Metamodel-Based Monte Carlo Simulation Approach for Responsive Production Planning of Manufacturing Systems
Production planning is concerned with finding a release plan of jobs into the manufacturing system so that its actual outputs over time match the customer demand with the least cost. The biggest challenge of production planning lies in the difficulty to quantify the performance of a release plan, which is the necessary basis for plan optimization. Triggered by an input plan over a time horizon, the system outputs, work in process (WIP) and job departures, are non-stationary bivariate time series that interact with customer demand (another time series), resulting in the fulfillment/non-fulfillment of demand and in the holding cost of both WIP and finished-goods inventory. The relationship between a release plan and its resulting performance metrics (typically, mean/variance of the total cost and the demand fulfill rate is far from being adequately quantified in the existing literature of production planning. In this dissertation, a metamodel-based Monte Carlo simulation (MCS) method is developed to accurately capture the dynamic and stochastic behavior of a manufacturing system, and to allow for real-time evaluation of a release plan in terms of its performance metrics. This evaluation capability is embedded in a multi-objective optimization framework to enable the quick search of good (or optimum) release plans. The developed method has been applied to a scaled-down semiconductor fabrication system to demonstrate the quality of the metamodel-based MCS evaluation and the plan optimization results
- âŠ