182 research outputs found
Scheduling flow lines with buffers by ant colony digraph
This work starts from modeling the scheduling of n jobs on m machines/stages as flowshop with buffers in manufacturing. A mixed-integer linear programing model is presented, showing that buffers of size n - 2 allow permuting sequences of jobs between stages. This model is addressed in the literature as non-permutation flowshop scheduling (NPFS) and is described in this article by a disjunctive graph (digraph) with the purpose of designing specialized heuristic and metaheuristics algorithms for the NPFS problem. Ant colony optimization (ACO) with the biologically inspired mechanisms of learned desirability and pheromone rule is shown to produce natively eligible schedules, as opposed to most metaheuristics approaches, which improve permutation solutions found by other heuristics. The proposed ACO has been critically compared and assessed by computation experiments over existing native approaches. Most makespan upper bounds of the established benchmark problems from Taillard (1993) and Demirkol, Mehta, and Uzsoy (1998) with up to 500 jobs on 20 machines have been improved by the proposed ACO
Overview on: sequencing in mixed model flowshop production line with static and dynamic context
In the present work a literature overview was given on solution techniques considering basic as well as more advanced and consequently more complex arrangements of mixed model flowshops. We first analyzed the occurrence of setup time/cost; existing solution techniques are mainly focused on permutation sequences. Thereafter we discussed objectives resulting in the introduction of variety of methods allowing resequencing of jobs within the line. The possibility of resequencing within the line ranges from 1) offline or intermittent buffers, 2) parallel stations, namely flexible, hybrid or compound flowshops, 3) merging and splitting of parallel lines, 4) re-entrant flowshops, to 5) change job attributes without physically interchanging the position.
In continuation the differences in the consideration of static and dynamic demand was studied. Also intermittent setups are possible, depending on the horizon and including the possibility of resequencing, four problem cases were highlighted: static, semi dynamic, nearly dynamic and dynamic case.
Finally a general overview was given on existing solution methods, including exact and approximation methods. The approximation methods are furthermore divided in two cases, know as heuristics and methaheuristic
Iterated-greedy-based algorithms with beam search initialization for the permutation flowshop to minimize total tardiness
The permutation flow shop scheduling problem is one of the most studied operations research related problems. Literally, hundreds of exact and approximate algorithms have been proposed to optimise several objective functions. In this paper we address the total tardiness criterion, which is aimed towards the satisfaction of customers in a make-to-order scenario. Although several approximate algorithms have been proposed for this problem in the literature, recent contributions for related problems suggest that there is room for improving the current available algorithms. Thus, our contribution is twofold: First, we propose a fast beam-search-based constructive heuristic that estimates the quality of partial sequences without a complete evaluation of their objective function. Second, using this constructive heuristic as initial solution, eight variations of an iterated-greedy-based algorithm are proposed. A comprehensive computational evaluation is performed to establish the efficiency of our proposals against the existing heuristics and metaheuristics for the problem.Ministerio de Ciencia e Innovación DPI2013-44461-PMinisterio de Ciencia e Innovación DPI2016-80750-
An effective iterated greedy algorithm for the mixed no-idle flowshop scheduling problem
In the no-idle flowshop, machines cannot be idle after finishing one job and before starting the next one.
Therefore, start times of jobs must be delayed to guarantee this constraint. In practice machines show
this behavior as it might be technically unfeasible or uneconomical to stop a machine in between jobs.
This has important ramifications in the modern industry including fiber glass processing, foundries,
production of integrated circuits and the steel making industry, among others. However, to assume that
all machines in the shop have this no-idle constraint is not realistic. To the best of our knowledge, this is
the first paper to study the mixed no-idle extension where only some machines have the no-idle
constraint. We present a mixed integer programming model for this new problem and the equations to
calculate the makespan. We also propose a set of formulas to accelerate the calculation of insertions that
is used both in heuristics as well as in the local search procedures. An effective iterated greedy (IG)
algorithm is proposed. We use an NEH-based heuristic to construct a high quality initial solution. A local
search using the proposed accelerations is employed to emphasize intensification and exploration in the
IG. A new destruction and construction procedure is also shown. To evaluate the proposed algorithm, we
present several adaptations of other well-known and recent metaheuristics for the problem and conduct
a comprehensive set of computational and statistical experiments with a total of 1750 instances.
The results show that the proposed IG algorithm outperforms existing methods in the no-idle and in the
mixed no-idle scenarios by a significant margin.Quan-Ke Pan is partially supported by the National Science Foundation of China 61174187, Program for New Century Excellent Talents in University (NCET-13-0106), Science Foundation of Liaoning Province in China (2013020016), Basic scientific research foundation of Northeast University under Grant N110208001, Starting foundation of Northeast University under Grant 29321006, and Shandong Province Key Laboratory of Intelligent Information Processing and Network Security (Liaocheng University). Ruben Ruiz is partially supported by the Spanish Ministry of Economy and Competitiveness, under the project "RESULT - Realistic Extended Scheduling Using Light Techniques" with reference DPI2012-36243-C02-01 co-financed by the European Union and FEDER funds and by the Universitat Politecnica de Valencia, for the project MRPIV with reference PAID/2012/202.Pan, Q.; Ruiz García, R. (2014). An effective iterated greedy algorithm for the mixed no-idle flowshop scheduling problem. Omega. 44:41-50. https://doi.org/10.1016/j.omega.2013.10.002S41504
Multicriteria hybrid flow shop scheduling problem: literature review, analysis, and future research
This research focuses on the Hybrid Flow Shop production scheduling problem, which is one of the most difficult problems to solve. The literature points to several studies that focus the Hybrid Flow Shop scheduling problem with monocriteria functions. Despite of the fact that, many real world problems involve several objective functions, they can often compete and conflict, leading researchers to concentrate direct their efforts on the development of methods that take consider this variant into consideration. The goal of the study is to review and analyze the methods in order to solve the Hybrid Flow Shop production scheduling problem with multicriteria functions in the literature. The analyses were performed using several papers that have been published over the years, also the parallel machines types, the approach used to develop solution methods, the type of method develop, the objective function, the performance criterion adopted, and the additional constraints considered. The results of the reviewing and analysis of 46 papers showed opportunities for future researchon this topic, including the following: (i) use uniform and dedicated parallel machines, (ii) use exact and metaheuristics approaches, (iv) develop lower and uppers bounds, relations of dominance and different search strategiesto improve the computational time of the exact methods, (v) develop other types of metaheuristic, (vi) work with anticipatory setups, and (vii) add constraints faced by the production systems itself
Energy Efficient Manufacturing Scheduling: A Systematic Literature Review
The social context in relation to energy policies, energy supply, and
sustainability concerns as well as advances in more energy-efficient
technologies is driving a need for a change in the manufacturing sector. The
main purpose of this work is to provide a research framework for
energy-efficient scheduling (EES) which is a very active research area with
more than 500 papers published in the last 10 years. The reason for this
interest is mostly due to the economic and environmental impact of considering
energy in production scheduling. In this paper, we present a systematic
literature review of recent papers in this area, provide a classification of
the problems studied, and present an overview of the main aspects and
methodologies considered as well as open research challenges
Nonpermutation flow line scheduling by ant colony optimization
A flow line is a conventional manufacturing system where all jobs must be processed on all machines with the same operation sequence. Line buffers allow nonpermutation flowshop scheduling and job sequences to be changed on different machines. A mixed-integer linear programming model for nonpermutation flowshop scheduling and the buffer requirement along with manufacturing implication is proposed. Ant colony optimization based heuristic is evaluated against Taillard's (1993) well-known flowshop benchmark instances, with 20 to 500 jobs to be processed on 5 to 20 machines (stages). Computation experiments show that the proposed algorithm is incumbent to the state-of-the-art ant colony optimization for flowshop with higher job to machine ratios, using the makespan as the optimization criterion
A speed-up procedure for the hybrid flow shop scheduling problem
Article number 115903During the last decades, hundreds of approximate algorithms have been proposed in the literature addressing
flow-shop-based scheduling problems. In the race for finding the best proposals to solve these problems, speedup procedures to compute objective functions represent a key factor in the efficiency of the algorithms. This
is the case of the well-known Taillard’s accelerations proposed for the traditional flow shop with makespan
minimisation or several other accelerations proposed for related scheduling problems. Despite the interest in
proposing such methods to improve the efficiency of approximate algorithms, to the best of our knowledge,
no speed-up procedure has been proposed so far in the hybrid flow shop literature. To tackle this challenge,
we propose in this paper a speed-up procedure for makespan minimisation, which can be incorporate in
insertion-based neighbourhoods using a complete representation of the solutions. This procedure is embedded
in the traditional iterated greedy algorithm. The computational experience shows that even incorporating the
proposed speed-up procedure in this simple metaheuristic results in outperforming the best metaheuristic for
the problem under consideration.Junta de Andalucía(España) US-1264511Ministerio de Ciencia e Innovación (España) PID2019-108756RB-I0
The Distributed and Assembly Scheduling Problem
Tesis por compendio[EN] Nowadays, manufacturing systems meet different new global challenges and
the existence of a collaborative manufacturing environment is essential to face
with. Distributed manufacturing and assembly systems are two manufacturing
systems which allow industries to deal with some of these challenges. This
thesis studies a production problem in which both distributed manufacturing
and assembly systems are considered. Although distributed manufacturing
systems and assembly systems are well-known problems and have been extensively
studied in the literature, to the best of our knowledge, considering
these two systems together as in this thesis is the first effort in the literature.
Due to the importance of scheduling optimization on production performance,
some different ways to optimize the scheduling of the considered problem are
discussed in this thesis.
The studied scheduling setting consists of two stages: A production and an
assembly stage. Various production centers make the first stage. Each of these
centers consists of several machines which are dedicated to manufacture jobs.
A single assembly machine is considered for the second stage. The produced
jobs are assembled on the assembly machine to form final products through a
defined assembly program.
In this thesis, two different problems regarding two different production
configurations for the production centers of the first stage are considered.
The first configuration is a flowshop that results in what we refer to as the
Distributed Assembly Permutation Flowshop Scheduling Problem (DAPFSP).
The second problem is referred to as the Distributed Parallel Machine and
Assembly Scheduling Problem (DPMASP), where unrelated parallel machines
configure the production centers. Makespan minimization of the product on the
assembly machine located in the assembly stage is considered as the objective
function for all considered problems.
In this thesis some extensions are considered for the studied problems
so as to bring them as close as possible to the reality of production shops.
In the DAPFSP, sequence dependent setup times are added for machines in
both production and assembly stages. Similarly, in the DPMASP, due to
technological constraints, some defined jobs can be processed only in certain
factories.
Mathematical models are presented as an exact solution for some of the
presented problems and two state-of-art solvers, CPLEX and GUROBI are
used to solve them. Since these solvers are not able to solve large sized
problems, we design and develop heuristic methods to solve the problems. In
addition to heuristics, some metaheuristics are also designed and proposed to
improve the solutions obtained by heuristics. Finally, for each proposed problem,
the performance of the proposed solution methods is compared through
extensive computational and comprehensive ANOVA statistical analysis.[ES] Los sistemas de producción se enfrentan a retos globales en los que el concepto
de fabricación colaborativa es crucial para poder tener éxito en el entorno
cambiante y complejo en el que nos encontramos. Una característica de los sistemas
productivos que puede ayudar a lograr este objetivo consiste en disponer
de una red de fabricación distribuida en la que los productos se fabriquen en
localizaciones diferentes y se vayan ensamblando para obtener el producto
final. En estos casos, disponer de modelos y herramientas para mejorar el
rendimiento de sistemas de producción distribuidos con ensamblajes es una
manera de asegurar la eficiencia de los mismos.
En esta tesis doctoral se estudian los sistemas de fabricación distribuidos
con operaciones de ensamblaje. Los sistemas distribuidos y los sistemas con
operaciones de ensamblaje han sido estudiados por separado en la literatura.
De hecho, no se han encontrado estudios de sistemas con ambas características
consideradas de forma conjunta.
Dada la complejidad de considerar conjuntamente ambos tipos de sistemas
a la hora de realizar la programación de la producción en los mismos, se ha
abordado su estudio considerando un modelo bietápico en la que en la primera
etapa se consideran las operaciones de producción y en la segunda se plantean
las operaciones de ensamblaje.
Dependiendo de la configuración de la primera etapa se han estudiado dos
variantes. En la primera variante se asume que la etapa de producción está
compuesta por sendos sistemas tipo flowshop en los que se fabrican los componentes
que se ensamblan en la segunda etapa (Distributed Assembly Permutation
Flowshop Scheduling Problem o DAPFSP). En la segunda variante
se considera un sistema de máquinas en paralelo no relacionadas (Distributed
Parallel Machine and Assembly Scheduling Problem o DPMASP). En ambas
variantes se optimiza la fecha de finalización del último trabajo secuenciado
(Cmax) y se contempla la posibilidad que existan tiempos de cambio (setup)
dependientes de la secuencia de trabajos fabricada. También, en el caso
DPMASP se estudia la posibilidad de prohibir o no el uso de determinadas
máquinas de la etapa de producción.
Se han desarrollado modelos matemáticos para resolver algunas de las
variantes anteriores. Estos modelos se han resuelto mediante los programas
CPLEX y GUROBI en aquellos casos que ha sido posible. Para las instancias
en los que el modelo matemático no ofrecía una solución al problema se han
desarrollado heurísticas y metaheurísticas para ello.
Todos los procedimientos anteriores han sido estudiados para determinar
el rendimiento de los diferentes algoritmos planteados. Para ello se ha realizado
un exhaustivo estudio computacional en el que se han aplicado técnicas
ANOVA.
Los resultados obtenidos en la tesis permiten avanzar en la comprensión
del comportamiento de los sistemas productivos distribuidos con ensamblajes,
definiendo algoritmos que permiten obtener buenas soluciones a este tipo de
problemas tan complejos que aparecen tantas veces en la realidad industrial.[CA] Els sistemes de producció s'enfronten a reptes globals en què el concepte de
fabricació col.laborativa és crucial per a poder tindre èxit en l'entorn canviant
i complex en què ens trobem. Una característica dels sistemes productius
que pot ajudar a aconseguir este objectiu consistix a disposar d'una xarxa de
fabricació distribuïda en la que els productes es fabriquen en localitzacions
diferents i es vagen acoblant per a obtindre el producte final. En estos casos,
disposar de models i ferramentes per a millorar el rendiment de sistemes de
producció distribuïts amb acoblaments és una manera d'assegurar l'eficiència
dels mateixos.
En esta tesi doctoral s'estudien els sistemes de fabricació distribuïts amb
operacions d'acoblament. Els sistemes distribuïts i els sistemes amb operacions
d'acoblament han sigut estudiats per separat en la literatura però, en allò
que es coneix, no s'han trobat estudis de sistemes amb ambdós característiques
conjuntament. Donada la complexitat de considerar conjuntament ambdós
tipus de sistemes a l'hora de realitzar la programació de la producció en els
mateixos, s'ha abordat el seu estudi considerant un model bietàpic en la que
en la primera etapa es consideren les operacions de producció i en la segona es
plantegen les operacions d'acoblament.
Depenent de la configuració de la primera etapa s'han estudiat dos variants.
En la primera variant s'assumix que l'etapa de producció està composta per
sengles sistemes tipus flowshop en els que es fabriquen els components que
s'acoblen en la segona etapa (Distributed Assembly Permutation Flowshop
Scheduling Problem o DAPFSP). En la segona variant es considera un sistema
de màquines en paral.lel no relacionades (Distributed Parallel Machine and
Assembly Scheduling Problem o DPMASP). En ambdós variants s'optimitza
la data de finalització de l'últim treball seqüenciat (Cmax) i es contempla la
possibilitat que existisquen temps de canvi (setup) dependents de la seqüència
de treballs fabricada. També, en el cas DPMASP s'estudia la possibilitat de
prohibir o no l'ús de determinades màquines de l'etapa de producció.
S'han desenvolupat models matemàtics per a resoldre algunes de les variants
anteriors. Estos models s'han resolt per mitjà dels programes CPLEX
i GUROBI en aquells casos que ha sigut possible. Per a les instàncies en
què el model matemàtic no oferia una solució al problema s'han desenrotllat
heurístiques i metaheurísticas per a això. Tots els procediments anteriors han
sigut estudiats per a determinar el rendiment dels diferents algoritmes plantejats.
Per a això s'ha realitzat un exhaustiu estudi computacional en què s'han
aplicat tècniques ANOVA.
Els resultats obtinguts en la tesi permeten avançar en la comprensió del
comportament dels sistemes productius distribuïts amb acoblaments, definint
algoritmes que permeten obtindre bones solucions a este tipus de problemes
tan complexos que apareixen tantes vegades en la realitat industrial.Hatami, S. (2016). The Distributed and Assembly Scheduling Problem [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/64072TESISCompendi
Internet of Things in urban waste collection
Nowadays, the waste collection management has an important role in urban areas. This paper faces this issue and proposes the application of a metaheuristic for the optimization of a weekly schedule and routing of the waste collection activities in an urban area. Differently to several contributions in literature, fixed periodic routes are not imposed. The results significantly improve the performance of the company involved, both in terms of resources used and costs saving
- …