Flexible N-Way MIMO Detector on GPU

This paper proposes a flexible Multiple-Input Multiple-Output (MIMO) detector on graphics processing units (GPU). MIMO detection is a key technology in broadband wireless system such as LTE,WiMAX, and 802.11n. Existing detectors either use costly sorting for better performance or sacrifice sorting for higher throughput. To achieve good performance with high thoughput, our detector runs multiple search passes in parallel, where each search pass detects the transmit stream with a different permuted detection order. We show that this flexible detector, including QR decomposition preprocessing, outperforms existing GPU MIMO detectors while maintaining good bit error rate (BER) performance. In addition, this detector can achieve different tradeoffs between throughput and accuracy by changing the number of parallel search passes.National Science Foundation (NSF

Implementation of a High Throughput Soft MIMO Detector on GPU

Multiple-input multiple-output (MIMO) significantly increases the throughput of a communication system by employing multiple antennas at the transmitter and the receiver. To extract maximum performance from a MIMO system, a computationally intensive search based detector is needed. To meet the challenge of MIMO detection, typical suboptimal MIMO detectors are ASIC or FPGA designs. We aim to show that a MIMO detector on Graphic processor unit (GPU), a low-cost parallel programmable co-processor, can achieve high throughput and can serve as an alternative to ASIC/FPGA designs. However, careful architecture aware software design is needed to leverage the performance offered by GPU. We propose a novel soft MIMO detection algorithm, multi-pass trellis traversal (MTT), and show that we can achieve ASIC/FPGA-like performance and handle different configurations in software on GPU. The proposed design can be used to accelerate wireless physical layer simulations and to offload MIMO detection processing in wireless testbed platforms.NokiaNokia Siemens Networks (NSN)Texas InstrumentsXilinxNational Science Foundatio

FlexCore: Massively Parallel and Flexible Processing for Large MIMO Access Points

Large MIMO base stations remain among wireless network designers’ best tools for increasing wireless throughput while serving many clients, but current system designs, sacrifice throughput with simple linear MIMO detection algorithms. Higher-performance detection techniques are known, but remain off the table because these systems parallelize their computation at the level of a whole OFDM subcarrier, sufficing only for the less demanding linear detection approaches they opt for. This paper presents FlexCore, the first computational architecture capable of parallelizing the detection of large numbers of mutually-interfering information streams at a granularity below individual OFDM subcarriers, in a nearly-embarrassingly parallel manner while utilizing any number of available processing elements. For 12 clients sending 64-QAM symbols to a 12-antenna base station, our WARP testbed evaluation shows similar network throughput to the state-of-the-art while using an order of magnitude fewer processing elements. For the same scenario, our combined WARP-GPU testbed evaluation demonstrates a 19x computational speedup, with 97% increased energy efficiency when compared with the state of the art. Finally, for the same scenario, an FPGA-based comparison between FlexCore and the state of the art shows that FlexCore can achieve up to 96% better energy efficiency, and can offer up to 32x the processing throughput

Design and Implementation of Efficient Algorithms for Wireless MIMO Communication Systems

En la última década, uno de los avances tecnológicos más importantes que han hecho culminar la nueva generación de banda ancha inalámbrica es la comunicación mediante sistemas de múltiples entradas y múltiples salidas (MIMO). Las tecnologías MIMO han sido adoptadas por muchos estándares inalámbricos tales como LTE, WiMAS y WLAN. Esto se debe principalmente a su capacidad de aumentar la máxima velocidad de transmisión , junto con la fiabilidad alcanzada y la cobertura de las comunicaciones inalámbricas actuales sin la necesidad de ancho de banda extra ni de potencia de transmisión adicional. Sin embargo, las ventajas proporcionadas por los sistemas MIMO se producen a expensas de un aumento sustancial del coste de implementación de múltiples antenas y de la complejidad del receptor, la cual tiene un gran impacto sobre el consumo de energía. Por esta razón, el diseño de receptores de baja complejidad es un tema importante que se abordará a lo largo de esta tesis. En primer lugar, se investiga el uso de técnicas de preprocesado de la matriz de canal MIMO bien para disminuir el coste computacional de decodificadores óptimos o bien para mejorar las prestaciones de detectores subóptimos lineales, SIC o de búsqueda en árbol. Se presenta una descripción detallada de dos técnicas de preprocesado ampliamente utilizadas: el método de Lenstra, Lenstra, Lovasz (LLL) para lattice reduction (LR) y el algorimo VBLAST ZF-DFE. Tanto la complejidad como las prestaciones de ambos métodos se han evaluado y comparado entre sí. Además, se propone una implementación de bajo coste del algoritmo VBLAST ZF-DFE, la cual se incluye en la evaluación. En segundo lugar, se ha desarrollado un detector MIMO basado en búsqueda en árbol de baja complejidad, denominado detector K-Best de amplitud variable (VB K-Best). La idea principal de este método es aprovechar el impacto del número de condición de la matriz de canal sobre la detección de datos con el fin de disminuir la complejidad de los sistemasRoger Varea, S. (2012). Design and Implementation of Efficient Algorithms for Wireless MIMO Communication Systems [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/16562Palanci

Review of Recent Trends

This work was partially supported by the European Regional Development Fund (FEDER), through the Regional Operational Programme of Centre (CENTRO 2020) of the Portugal 2020 framework, through projects SOCA (CENTRO-01-0145-FEDER-000010) and ORCIP (CENTRO-01-0145-FEDER-022141). Fernando P. Guiomar acknowledges a fellowship from “la Caixa” Foundation (ID100010434), code LCF/BQ/PR20/11770015. Houda Harkat acknowledges the financial support of the Programmatic Financing of the CTS R&D Unit (UIDP/00066/2020).MIMO-OFDM is a key technology and a strong candidate for 5G telecommunication systems. In the literature, there is no convenient survey study that rounds up all the necessary points to be investigated concerning such systems. The current deeper review paper inspects and interprets the state of the art and addresses several research axes related to MIMO-OFDM systems. Two topics have received special attention: MIMO waveforms and MIMO-OFDM channel estimation. The existing MIMO hardware and software innovations, in addition to the MIMO-OFDM equalization techniques, are discussed concisely. In the literature, only a few authors have discussed the MIMO channel estimation and modeling problems for a variety of MIMO systems. However, to the best of our knowledge, there has been until now no review paper specifically discussing the recent works concerning channel estimation and the equalization process for MIMO-OFDM systems. Hence, the current work focuses on analyzing the recently used algorithms in the field, which could be a rich reference for researchers. Moreover, some research perspectives are identified.publishersversionpublishe

An adaptive detector implementation for MIMO-OFDM downlink

Cognitive radio (CR) systems require flexible and adaptive implementations of signal processing algorithms. An adaptive symbol detector is needed in the baseband receiver chain to achieve the desired flexibility of a CR system. This paper presents a novel design of an adaptive detector as an application-specific instruction-set processor (ASIP). The ASIP template is based on transport triggered architecture (TTA). The processor architecture is designed in such a manner that it can be programmed to support different suboptimal multiple-input multiple-output (MIMO) detection algorithms in a single TTA processor. The linear minimum mean-square error (LMMSE) and three variants of the selective spanning for fast enumeration (SSFE) detection algorithms are considered. The detection algorithm can be switched between the LMMSE and SSFE according to the bit error rate (BER) performance requirement in the TTA processor. The design can be scaled for different antenna configurations and different modulations. Some of the algorithm architecture co-optimization techniques used here are also presented. Unlike most other detector ASIPs, high level language is used to program the processor to meet the time-to-market requirements. The adaptive detector delivers 4.88 - 49.48 Mbps throughput at a clock frequency of 200 MHz on 90 nm technology

On the application of graphics processor to wireless receiver design

In many wireless systems, a Turbo decoder is often combined with a soft-output multiple-input and multiple-output (MIMO) detector at the receiver to maximize performance in many 4G and beyond wireless standards. Although custom application specific designs are usually used to meet this challenge, programmable graphics processing units (GPU) has become an alternative to the traditional ASIC and FPGA solution for wireless applications. However, careful architecture-aware algorithm design and mapping are required to maximize performance of a communication block on GPU. For MIMO soft detection, we implemented a new MIMO soft detection algorithm, multi-pass trellis traversal (MTT). For Turbo decoding, we used a parallel window algorithm. We showed that our implementations can achieve high throughput while maintaining good performance. This work will allow us to implement a complete iterative MIMO receiver in software on GPU in the future

Towards a Common Software/Hardware Methodology for Future Advanced Driver Assistance Systems

The European research project DESERVE (DEvelopment platform for Safe and Efficient dRiVE, 2012-2015) had the aim of designing and developing a platform tool to cope with the continuously increasing complexity and the simultaneous need to reduce cost for future embedded Advanced Driver Assistance Systems (ADAS). For this purpose, the DESERVE platform profits from cross-domain software reuse, standardization of automotive software component interfaces, and easy but safety-compliant integration of heterogeneous modules. This enables the development of a new generation of ADAS applications, which challengingly combine different functions, sensors, actuators, hardware platforms, and Human Machine Interfaces (HMI). This book presents the different results of the DESERVE project concerning the ADAS development platform, test case functions, and validation and evaluation of different approaches. The reader is invited to substantiate the content of this book with the deliverables published during the DESERVE project. Technical topics discussed in this book include:Modern ADAS development platforms;Design space exploration;Driving modelling;Video-based and Radar-based ADAS functions;HMI for ADAS;Vehicle-hardware-in-the-loop validation system

Deep Learning Based Channel Estimation in Data Driven MIMO Receiver

OFDM (orthogonal frequency division multiplexing) is a wireless network methodology that sends multiple data streams across a particular channel while effectiently handling inter-symbol interference and enhancing frequency band available. And since the antenna is sending signals, evaluating the noise in a noisy channel is essential. This research aims into compressed sensing (CS) as a way to improve throughput and BER performance by transmitting additional data bits within every subcarrier frame whilst still limiting detector unpredictability. The Neuro-LS methodology is used in this study to generate a soft trellis decoding algorithm through channel estimation. Trellis decoding performs better BER, and DNN relying channel estimation outperforms BER, according to the findings