Comparative performance evaluation of latency and link dynamic power consumption modelling algorithms in wormhole switching networks on chip

The simulation of interconnect architectures can be a time-consuming part of the design flow of on-chip multiprocessors. Accurate simulation of state-of-the art network-on-chip interconnects can take several hours for realistic application examples, and this process must be repeated for each design iteration because the interactions between design choices can greatly affect the overall throughput and latency performance of the system. This paper presents a series of network-on-chip transaction-level model (TLM) algorithms that provide a highly abstracted view of the process of data transmission in priority preemptive and non-preemptive networks-on-chip, which permit a major reduction in simulation event count. These simulation models are tested using two realistic application case studies and with synthetic traffic. Results presented demonstrate that these lightweight TLM simulation models can produce latency figures accurate to within mere flits for the majority of flows, and more than 93% accurate link dynamic power consumption modelling, while simulating 2.5 to 3 orders of magnitude faster when compared to a cycle-accurate model of the same interconnect

Fast simulation of networks-on-chip with priority-preemptive arbitration

An increasingly time-consuming part of the design flow of on-chip multiprocessors is the simulation of the interconnect architecture. The accurate simulation of state-of-the art network-on-chip interconnects can take hours, and this process is repeated for each design iteration because it provides valuable insights on communication latencies that can greatly affect the overall performance of the system. In this article, we identify a time-predictable network-on-chip architecture and show that its timing behaviour can be predicted using models which are far less complex than the architecture itself. We then explore such a feature to produce simplified and lightweight simulation models that can produce latency figures with more than 90% accuracy and simulate more than 1,000 times faster when compared to a cycle-accurate model of the same interconnect

Improving Packet Predictability of Scalable Network-on-Chip Designs without Priority Pre-emptive Arbitration

The quest for improving processing power and efficiency is spawning research into many-core systems with hundreds or thousands of cores. With communication being forecast as the foremost performance bottleneck, Network-on-Chips are the favoured communication infrastructure in the context mainly due to reasons like scalability and power efficiency. However, contention between non-preemptive NoC packets can result in variation in packet latencies thus potentially limiting the overall utilisation of the many-core system. Typical latency predictability enhancement techniques like Virtual Channels or Time Division Multiplexing are usually hardware expensive or non-scalable or both. This research explores the use of dynamic and scalable techniques in Network-on-Chip routers to improve packet predictability by countering Head-of-line blocking (blocked low priority packet blocking a high priority packet) and tailbacking (low priority packet utilising the link that is required by a high priority packet) of non-preemptive packets. The Priority forwarding and tunnelling technique introduced is designed to detect Head-of-line blocking situations so that its internal arbitration parameters can be altered (by forwarding packet parameters down the line) to resolve such issues. The Selective packet splitting technique presented allows resolution of tailbacking by emulating the effect of preemption of packets (by splitting packets) by using a low overhead alternative that manipulates packets. Finally, the thesis presents an architecture that allows the routers to have a notion of timeliness in data packets thus enabling packet arbitration based on application-supplied priority and timeliness thus improving the quality of service given to lower priority packets. Furthermore, the techniques presented in the thesis do not require additional hardware with the increase in size of the NoC. This enables the techniques to be scalable, as the size of the NoC or the number of packet priorities the NoC has to handle does not affect the functionality and operation of the techniques

Vorhersagbares und zur Laufzeit adaptierbares On-Chip Netzwerk für gemischt kritische Echtzeitsysteme

The industry of safety-critical and dependable embedded systems calls for even cheaper, high performance platforms that allow flexibility and an efficient verification of safety and real-time requirements. To cope with the increasing complexity of interconnected functions and to reduce the cost and power consumption of the system, multicore systems are used to efficiently integrate different processing units in the same chip. Networks-on-chip (NoCs), as a modular interconnect, are used as a promising solution for such multiprocessor systems on chip (MPSoCs), due to their scalability and performance. For safety-critical systems, a major goal is the avoidance of hazards. For this, safety-critical systems are qualified or even certified to prove the correctness of the functioning under all possible cases. A predictable behaviour of the NoC can help to ease the qualification process of the system. To achieve the required predictability, designers have two classes of solutions: quality of service mechanisms and (formal) analysis. For mixed-criticality systems, isolation and analysis approaches must be combined to efficiently achieve the desired predictability. Traditional NoC analysis and architecture concepts tackle only a subpart of the challenges: they focus on either performance or predictability. Existing, predictable NoCs are deemed too expensive and inflexible to host a variety of applications with opposing constraints. And state-of-the-art analyses neglect certain platform properties to verify the behaviour. Together this leads to a high over-provisioning of the hardware resources as well as adverse impacts on system performance, and on the flexibility of the system. In this work we tackle these challenges and develop a predictable and runtime-adaptable NoC architecture that efficiently integrates mixed-critical applications with opposing constraints. Additionally, we present a modelling and analysis framework for NoCs that accounts for backpressure. This framework enables to evaluate the performance and reliability early at design time. Hence, the designer can assess multiple design decisions by using abstract models and formal approaches.Die Industrie der sicherheitskritischen und zuverlässigen eingebetteten Systeme verlangt nach noch günstigeren, leistungsfähigeren Plattformen, welche Flexibilität und eine effiziente Überprüfung der Sicherheits- und Echtzeitanforderungen ermöglichen. Um der zunehmenden Komplexität der zunehmend vernetzten Funktionen gerecht zu werden und die Kosten und den Stromverbrauch eines Systems zu reduzieren, werden Mehrkern-Systeme eingesetzt. On-Chip Netzwerke werden aufgrund ihrer Skalierbarkeit und Leistung als vielversprechende Lösung für solch Mehrkern-Systeme eingesetzt. Bei sicherheitskritischen Systemen ist die Vermeidung von Gefahren ein wesentliches Ziel. Dazu werden sicherheitskritische Systeme qualifiziert oder zertifiziert, um die Funktionsfähigkeit in allen möglichen Fällen nachzuweisen. Ein vorhersehbares Verhalten des on-Chip Netzwerks kann dabei helfen, den Qualifizierungsprozess des Systems zu erleichtern. Um die erforderliche Vorhersagbarkeit zu erreichen, gibt es zwei Klassen von Lösungen: Quality of Service Mechanismen und (formale) Analyse. Für Systeme mit gemischter Relevanz müssen Isolationsmechanismen und Analyseansätze kombiniert werden, um die gewünschte Vorhersagbarkeit effizient zu erreichen. Traditionelle Analyse- und Architekturkonzepte für on-Chip Netzwerke lösen nur einen Teil dieser Herausforderungen: sie konzentrieren sich entweder auf Leistung oder Vorhersagbarkeit. Existierende vorhersagbare on-Chip Netzwerke werden als zu teuer und unflexibel erachtet, um eine Vielzahl von Anwendungen mit gegensätzlichen Anforderungen zu integrieren. Und state-of-the-art Analysen vernachlässigen bzw. vereinfachen bestimmte Plattformeigenschaften, um das Verhalten überprüfen zu können. Dies führt zu einer hohen Überbereitstellung der Hardware-Ressourcen als auch zu negativen Auswirkungen auf die Systemleistung und auf die Flexibilität des Systems. In dieser Arbeit gehen wir auf diese Herausforderungen ein und entwickeln eine vorhersehbare und zur Laufzeit anpassbare Architektur für on-Chip Netzwerke, welche gemischt-kritische Anwendungen effizient integriert. Zusätzlich stellen wir ein Modellierungs- und Analyseframework für on-Chip Netzwerke vor, das den Paketrückstau berücksichtigt. Dieses Framework ermöglicht es, Designentscheidungen anhand abstrakter Modelle und formaler Ansätze frühzeitig beurteilen

NoC-based Architectures for Real-Time Applications : Performance Analysis and Design Space Exploration

Monoprocessor architectures have reached their limits in regard to the computing power they offer vs the needs of modern systems. Although multicore architectures partially mitigate this limitation and are commonly used nowadays, they usually rely on intrinsically non-scalable buses to interconnect the cores. The manycore paradigm was proposed to tackle the scalability issue of bus-based multicore processors. It can scale up to hundreds of processing elements (PEs) on a single chip, by organizing them into computing tiles (holding one or several PEs). Intercore communication is usually done using a Network-on-Chip (NoC) that consists of interconnected onchip routers allowing communication between tiles. However, manycore architectures raise numerous challenges, particularly for real-time applications. First, NoC-based communication tends to generate complex blocking patterns when congestion occurs, which complicates the analysis, since computing accurate worst-case delays becomes difficult. Second, running many applications on large Systems-on-Chip such as manycore architectures makes system design particularly crucial and complex. On one hand, it complicates Design Space Exploration, as it multiplies the implementation alternatives that will guarantee the desired functionalities. On the other hand, once a hardware architecture is chosen, mapping the tasks of all applications on the platform is a hard problem, and finding an optimal solution in a reasonable amount of time is not always possible. Therefore, our first contributions address the need for computing tight worst-case delay bounds in wormhole NoCs. We first propose a buffer-aware worst-case timing analysis (BATA) to derive upper bounds on the worst-case end-to-end delays of constant-bit rate data flows transmitted over a NoC on a manycore architecture. We then extend BATA to cover a wider range of traffic types, including bursty traffic flows, and heterogeneous architectures. The introduced method is called G-BATA for Graph-based BATA. In addition to covering a wider range of assumptions, G-BATA improves the computation time; thus increases the scalability of the method. In a second part, we develop a method addressing design and mapping for applications with real-time constraints on manycore platforms. It combines model-based engineering tools (TTool) and simulation with our analytical verification technique (G-BATA) and tools (WoPANets) to provide an efficient design space exploration framework. Finally, we validate our contributions on (a) a serie of experiments on a physical platform and (b) two case studies taken from the real world: an autonomous vehicle control application, and a 5G signal decoder applicatio

Conflict-Free Networks on Chip for Real Time Systems

[ES] La constante necesidad de un mayor rendimiento para cumplir con la gran demanda de potencia de cómputo de las nuevas aplicaciones, (ej. sistemas de conducción autónoma), obliga a la industria a apostar por la tecnología basada en Sistemas en Chip con Procesadores Multinúcleo (MPSoCs) en sus sistemas embebidos de seguridad-crítica. Los sistemas MPSoCs generalmente incluyen una red en el chip (NoC) para interconectar los núcleos de procesamiento entre ellos, con la memoria y con el resto de recursos compartidos. Desafortunadamente, el uso de las NoCs dificulta alcanzar la predecibilidad en el tiempo, ya que pueden aparecer conflictos en muchos puntos y de forma distribuida a nivel de red. Para afrontar este problema, en esta tesis se propone un nuevo paradigma de diseño para NoCs de tiempo real donde los conflictos en la red son eliminados por diseño. Este nuevo paradigma parte del Grafo de Dependencia de Canales (CDG) para evitar los conflictos de red de forma determinista. Nuestra solución es capaz de inyectar mensajes de forma natural usando un periodo TDM igual al límite teórico óptimo sin la necesidad de usar un proceso offline exigente computacionalmente. La red se ha integrado en un sistema multinúcleo basado en tiles y adaptado a su jerarquía de memoria. Como segunda contribución principal, proponemos un nuevo planificador dinámico y distribuido capaz de alcanzar un rendimiento pico muy cercanos a las NoC basadas en un diseño wormhole sin comprometer sus garantías de tiempo real. El planificador se basa en nuestro diseño de red para explotar sus propiedades clave. Los resultados de nuestra NoC muestran que nuestro diseño garantiza la predecibilidad en el tiempo evitando interferencias en la red entre múltiples aplicaciones ejecutándose concurrentemente. La red siempre garantiza el rendimiento y también mejora el rendimiento respecto al de las redes wormhole en una red 4 x 4 en un factor de 3,7x cuando se inyecta trafico para generar interferencias. En una red 8 x 8 las diferencias son incluso mayores. Además, la red obtiene un ahorro de área total del 10,79% frente a una implementación básica de una red wormhole. El planificador propuesto alcanza una mejora de rendimiento de 6,9x y 14,4x frente la versión básica de la red DCFNoC para redes en forma de malla de 16 y 64 nodos, respectivamente. Cuando lo comparamos frente a un conmutador estándar wormhole se preserva un rendimiento de red del 95% al mismo tiempo que preserva la estricta predecibilidad en el tiempo. Este logro abre la puerta a nuevos diseños de NoCs de alto rendimiento con predecibilidad en el tiempo. Como contribución final, construimos una taxonomía de NoCs basadas en TDM con propiedades de tiempo real. Con esta taxonomía realizamos un análisis exhaustivo para estudiar y comparar desde tiempos de respuesta, a implementaciones con bajo coste, pasando por soluciones de compromiso para diseños de NoCs de tiempo real. Como resultado, obtenemos nuevos diseños de NoCs basadas en TDM.[CA] La constant necessitat d'un major rendiment per a complir amb la gran demanda de potència de còmput de les noves aplicacions, (ex. sistemes de conducció autònoma), obliga la indústria a apostar per la tecnologia basada en Sistemes en Xip amb Processadors Multinucli (MPSoCs) en els seus sistemes embeguts de seguretat-crítica. Els sistemes MPSoCs generalment inclouen una xarxa en el xip (NoC) per a interconnectar els nuclis de processament entre ells, amb la memòria i amb la resta de recursos compartits. Desafortunadament, l'ús de les NoCs dificulta aconseguir la predictibilitat en el temps, ja que poden aparéixer conflictes en molts punts i de forma distribuïda a nivell de xarxa. Per a afrontar aquest problema, en aquesta tesi es proposa un nou paradigma de disseny per a NoCs de temps real on els conflictes en la xarxa són eliminats per disseny. Aquest nou paradigma parteix del Graf de Dependència de Canals (CDG) per a evitar els conflictes de xarxa de manera determinista. La nostra solució és capaç d'injectar missatges de mra natural fent ús d'un període TDM igual al límit teòric òptim sense la necessitat de fer ús d'un procés offline exigent computacionalment. La xarxa s'ha integrat en un sistema multinucli basat en tiles i adaptat a la seua jerarquia de memòria. Com a segona contribució principal, proposem un nou planificador dinàmic i distribuït capaç d'aconseguir un rendiment pic molt pròxims a les NoC basades en un disseny wormhole sense comprometre les seues garanties de temps real. El planificador es basa en el nostre disseny de xarxa per a explotar les seues propietats clau. Els resultats de la nostra NoC mostren que el nostre disseny garanteix la predictibilitat en el temps evitant interferències en la xarxa entre múltiples aplicacions executant-se concurrentment. La xarxa sempre garanteix el rendiment i també millora el rendiment respecte al de les xarxes wormhole en una xarxa 4 x 4 en un factor de 3,7x quan s'injecta trafic per a generar interferències. En una xarxa 8 x 8 les diferències són fins i tot majors. A més, la xarxa obté un estalvi d'àrea total del 10,79% front una implementació bàsica d'una xarxa wormhole. El planificador proposat aconsegueix una millora de rendiment de 6,9x i 14,4x front la versió bàsica de la xarxa DCFNoC per a xarxes en forma de malla de 16 i 64 nodes, respectivament. Quan ho comparem amb un commutador estàndard wormhole es preserva un rendiment de xarxa del 95% al mateix temps que preserva la estricta predictibilitat en el temps. Aquest assoliment obri la porta a nous dissenys de NoCs d'alt rendiment amb predictibilitat en el temps. Com a contribució final, construïm una taxonomia de NoCs basades en TDM amb propietats de temps real. Amb aquesta taxonomia realitzem una anàlisi exhaustiu per a estudiar i comparar des de temps de resposta, a implementacions amb baix cost, passant per solucions de compromís per a dissenys de NoCs de temps real. Com a resultat, obtenim nous dissenys de NoCs basades en TDM.[EN] The ever need for higher performance to cope with the high computational power demands of new applications (e.g autonomous driving systems), forces industry to support technology based on multi-processors system on chip (MPSoCs) in their safety-critical embedded systems. MPSoCs usually include a network-on-chip (NoC) to interconnect the cores between them and, with memory and the rest of shared resources. Unfortunately, the inclusion of NoCs difficults achieving time predictability as network-level conflicts may occur in many points in a distributed manner. To overcome this problem, this thesis proposes a new time-predictable NoC design paradigm where conflicts within the network are eliminated by design. This new paradigm builds on top of the Channel Dependency Graph (CDG) in order to deterministically avoid network conflicts. Our solution is able to naturally inject messages using a TDM period equal to the optimal theoretical bound without the need of using a computationally demanding offline process. The network is integrated in a tile-based manycore system and adapted to its memory hierarchy. As a second main contribution, we propose a novel distributed dynamic scheduler that is able to achieve peak performance close to a wormhole-based NoC design without compromising its real-time guarantees. The scheduler builds on top of our NoC design to exploit its key properties. The results of our NoC show that our design guarantees time predictability avoiding network interference among multiple running applications. The network always guarantees performance and also improves wormhole performance in a 4 x 4 setting by a factor of 3.7x when interference traffic is injected. For a 8 x 8 network differences are even larger. In addition, the network obtains a total area saving of 10.79% over a standard wormhole implementation. The proposed scheduler achieves an overall throughput improvement of 6.9x and 14.4x over a baseline conflict-free NoC for 16 and 64-node meshes, respectively. When compared against a standard wormhole router 95% of its network throughput is preserved while strict timing predictability is kept. This achievement opens the door to new high performance time predictable NoC designs. As a final contribution, we build a taxonomy of TDM-based NoCs with real-time properties. With this taxonomy we perform a comprehensive analysis to study and compare from response time specific, to low resource implementation cost, through trade-off solutions for real-time NoCs designs. As a result, we derive new TDM-based NoC designs.Picornell Sanjuan, T. (2021). Conflict-Free Networks on Chip for Real Time Systems [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/177347TESI

Quarc: an architecture for efficient on-chip communication

The exponential downscaling of the feature size has enforced a paradigm shift from computation-based design to communication-based design in system on chip development. Buses, the traditional communication architecture in systems on chip, are incapable of addressing the increasing bandwidth requirements of future large systems. Networks on chip have emerged as an interconnection architecture offering unique solutions to the technological and design issues related to communication in future systems on chip. The transition from buses as a shared medium to networks on chip as a segmented medium has given rise to new challenges in system on chip realm. By leveraging the shared nature of the communication medium, buses have been highly efficient in delivering multicast communication. The segmented nature of networks, however, inhibits the multicast messages to be delivered as efficiently by networks on chip. Relying on extensive research on multicast communication in parallel computers, several network on chip architectures have offered mechanisms to perform the operation, while conforming to resource constraints of the network on chip paradigm. Multicast communication in majority of these networks on chip is implemented by establishing a connection between source and all multicast destinations before the message transmission commences. Establishing the connections incurs an overhead and, therefore, is not desirable; in particular in latency sensitive services such as cache coherence. To address high performance multicast communication, this research presents Quarc, a novel network on chip architecture. The Quarc architecture targets an area-efficient, low power, high performance implementation. The thesis covers a detailed representation of the building blocks of the architecture, including topology, router and network interface. The cost and performance comparison of the Quarc architecture against other network on chip architectures reveals that the Quarc architecture is a highly efficient architecture. Moreover, the thesis introduces novel performance models of complex traffic patterns, including multicast and quality of service-aware communication

Erreichen von Performance in Netzwerken-On-Chip für Echtzeitsysteme

In many new applications, such as in automatic driving, high performance requirements have reached safety critical real-time systems. Consequently, Networks-on-Chip (NoCs) must efficiently host new sets of highly dynamic workloads e.g., high resolution sensor fusion and data processing, autonomous decision’s making combined with machine learning. The static platform management, as used in current safety critical systems, is no more sufficient to provide the needed level of service. A dynamic platform management could meet the challenge, but it usually suffers from a lack of predictability and the simplicity necessary for certification of safety and real-time properties. In this work, we propose a novel, global and dynamic arbitration for NoCs with real-time QoS requirements. The mechanism decouples the admission control from arbitration in routers thereby simplifying a dynamic adaptation and real-time analysis. Consequently, the proposed solution allows the deployment of a sophisticated contract-based QoS provisioning without introducing complicated and hard to maintain schemes, known from the frequently applied static arbiters. The presented work introduces an overlay network to synchronize transmissions using arbitration units called Resource Managers (RMs), which allows global and work-conserving scheduling. The description of resource allocation strategies is supplemented by protocol design and verification methodology bringing adaptive control to NoC communication in setups with different QoS requirements and traffic classes. For doing that, a formal worst-case timing analysis for the mechanism has been proposed which demonstrates that this solution not only exposes higher performance in simulation but, even more importantly, consistently reaches smaller formally guaranteed worst-case latencies than other strategies for realistic levels of system's utilization. The approach is not limited to a specific network architecture or topology as the mechanism does not require modifications of routers and therefore can be used together with the majority of existing manycore systems. Indeed, the evaluation followed using the generic performance optimized router designs, as well as two systems-on-chip focused on real-time deployments. The results confirmed that the proposed approach proves to exhibit significantly higher average performance in simulation and execution.In vielen neuen sicherheitskritische Anwendungen, wie z.B. dem automatisierten Fahren, werden große Anforderungen an die Leistung von Echtzeitsysteme gestellt. Daher müssen Networks-on-Chip (NoCs) neue, hochdynamische Workloads wie z.B. hochauflösende Sensorfusion und Datenverarbeitung oder autonome Entscheidungsfindung kombiniert mit maschineller Lernen, effizient auf einem System unterbringen. Die Steuerung der zugrunde liegenden NoC-Architektur, muss die Systemsicherheit vor Fehlern, resultierend aus dem dynamischen Verhalten des Systems schützen und gleichzeitig die geforderte Performance bereitstellen. In dieser Arbeit schlagen wir eine neuartige, globale und dynamische Steuerung für NoCs mit Echtzeit QoS Anforderungen vor. Das Schema entkoppelt die Zutrittskontrolle von der Arbitrierung in Routern. Hierdurch wird eine dynamische Anpassung ermöglicht und die Echtzeitanalyse vereinfacht. Der Einsatz einer ausgefeilten vertragsbasierten Ressourcen-Zuweisung wird so ermöglicht, ohne komplexe und schwer wartbare Mechanismen, welche bereits aus dem statischen Plattformmanagement bekannt sind einzuführen. Diese Arbeit stellt ein übergelagertes Netzwerk vor, welches Übertragungen mit Hilfe von Arbitrierungseinheiten, den so genannten Resource Managern (RMs), synchronisiert. Dieses überlagerte Netzwerk ermöglicht eine globale und lasterhaltende Steuerung. Die Beschreibung verschiedener Ressourcenzuweisungstrategien wird ergänzt durch ein Protokolldesign und Methoden zur Verifikation der adaptiven NoC Steuerung mit unterschiedlichen QoS Anforderungen und Verkehrsklassen. Hierfür wird eine formale Worst Case Timing Analyse präsentiert, welche das vorgestellte Verfahren abbildet. Die Resultate bestätitgen, dass die präsentierte Lösung nicht nur eine höhere Performance in der Simulation bietet, sondern auch formal kleinere Worst-Case Latenzen für realistische Systemauslastungen als andere Strategien garantiert. Der vorgestellte Ansatz ist nicht auf eine bestimmte Netzwerkarchitektur oder Topologie beschränkt, da der Mechanismus keine Änderungen an den unterliegenden Routern erfordert und kann daher zusammen mit bestehenden Manycore-Systemen eingesetzt werden. Die Evaluierung erfolgte auf Basis eines leistungsoptimierten Router-Designs sowie zwei auf Echtzeit-Anwendungen fokusierten Platformen. Die Ergebnisse bestätigten, dass der vorgeschlagene Ansatz im Durchschnitt eine deutlich höhere Leistung in der Simulation und Ausführung liefert

A time-predictable many-core processor design for critical real-time embedded systems

Critical Real-Time Embedded Systems (CRTES) are in charge of controlling fundamental parts of embedded system, e.g. energy harvesting solar panels in satellites, steering and breaking in cars, or flight management systems in airplanes. To do so, CRTES require strong evidence of correct functional and timing behavior. The former guarantees that the system operates correctly in response of its inputs; the latter ensures that its operations are performed within a predefined time budget. CRTES aim at increasing the number and complexity of functions. Examples include the incorporation of \smarter" Advanced Driver Assistance System (ADAS) functionality in modern cars or advanced collision avoidance systems in Unmanned Aerial Vehicles (UAVs). All these new features, implemented in software, lead to an exponential growth in both performance requirements and software development complexity. Furthermore, there is a strong need to integrate multiple functions into the same computing platform to reduce the number of processing units, mass and space requirements, etc. Overall, there is a clear need to increase the computing power of current CRTES in order to support new sophisticated and complex functionality, and integrate multiple systems into a single platform. The use of multi- and many-core processor architectures is increasingly seen in the CRTES industry as the solution to cope with the performance demand and cost constraints of future CRTES. Many-cores supply higher performance by exploiting the parallelism of applications while providing a better performance per watt as cores are maintained simpler with respect to complex single-core processors. Moreover, the parallelization capabilities allow scheduling multiple functions into the same processor, maximizing the hardware utilization. However, the use of multi- and many-cores in CRTES also brings a number of challenges related to provide evidence about the correct operation of the system, especially in the timing domain. Hence, despite the advantages of many-cores and the fact that they are nowadays a reality in the embedded domain (e.g. Kalray MPPA, Freescale NXP P4080, TI Keystone II), their use in CRTES still requires finding efficient ways of providing reliable evidence about the correct operation of the system. This thesis investigates the use of many-core processors in CRTES as a means to satisfy performance demands of future complex applications while providing the necessary timing guarantees. To do so, this thesis contributes to advance the state-of-the-art towards the exploitation of parallel capabilities of many-cores in CRTES contributing in two different computing domains. From the hardware domain, this thesis proposes new many-core designs that enable deriving reliable and tight timing guarantees. From the software domain, we present efficient scheduling and timing analysis techniques to exploit the parallelization capabilities of many-core architectures and to derive tight and trustworthy Worst-Case Execution Time (WCET) estimates of CRTES.Los sistemas críticos empotrados de tiempo real (en ingles Critical Real-Time Embedded Systems, CRTES) se encargan de controlar partes fundamentales de los sistemas integrados, e.g. obtención de la energía de los paneles solares en satélites, la dirección y frenado en automóviles, o el control de vuelo en aviones. Para hacerlo, CRTES requieren fuerte evidencias del correcto comportamiento funcional y temporal. El primero garantiza que el sistema funciona correctamente en respuesta de sus entradas; el último asegura que sus operaciones se realizan dentro de unos limites temporales establecidos previamente. El objetivo de los CRTES es aumentar el número y la complejidad de las funciones. Algunos ejemplos incluyen los sistemas inteligentes de asistencia a la conducción en automóviles modernos o los sistemas avanzados de prevención de colisiones en vehiculos aereos no tripulados. Todas estas nuevas características, implementadas en software,conducen a un crecimiento exponencial tanto en los requerimientos de rendimiento como en la complejidad de desarrollo de software. Además, existe una gran necesidad de integrar múltiples funciones en una sóla plataforma para así reducir el número de unidades de procesamiento, cumplir con requisitos de peso y espacio, etc. En general, hay una clara necesidad de aumentar la potencia de cómputo de los actuales CRTES para soportar nueva funcionalidades sofisticadas y complejas e integrar múltiples sistemas en una sola plataforma. El uso de arquitecturas multi- y many-core se ve cada vez más en la industria CRTES como la solución para hacer frente a la demanda de mayor rendimiento y las limitaciones de costes de los futuros CRTES. Las arquitecturas many-core proporcionan un mayor rendimiento explotando el paralelismo de aplicaciones al tiempo que proporciona un mejor rendimiento por vatio ya que los cores se mantienen más simples con respecto a complejos procesadores de un solo core. Además, las capacidades de paralelización permiten programar múltiples funciones en el mismo procesador, maximizando la utilización del hardware. Sin embargo, el uso de multi- y many-core en CRTES también acarrea ciertos desafíos relacionados con la aportación de evidencias sobre el correcto funcionamiento del sistema, especialmente en el ámbito temporal. Por eso, a pesar de las ventajas de los procesadores many-core y del hecho de que éstos son una realidad en los sitemas integrados (por ejemplo Kalray MPPA, Freescale NXP P4080, TI Keystone II), su uso en CRTES aún precisa de la búsqueda de métodos eficientes para proveer evidencias fiables sobre el correcto funcionamiento del sistema. Esta tesis ahonda en el uso de procesadores many-core en CRTES como un medio para satisfacer los requisitos de rendimiento de aplicaciones complejas mientras proveen las garantías de tiempo necesarias. Para ello, esta tesis contribuye en el avance del estado del arte hacia la explotación de many-cores en CRTES en dos ámbitos de la computación. En el ámbito del hardware, esta tesis propone nuevos diseños many-core que posibilitan garantías de tiempo fiables y precisas. En el ámbito del software, la tesis presenta técnicas eficientes para la planificación de tareas y el análisis de tiempo para aprovechar las capacidades de paralelización en arquitecturas many-core, y también para derivar estimaciones de peor tiempo de ejecución (Worst-Case Execution Time, WCET) fiables y precisas