Wrist and hand rehabilitation software platform based on leap motion controller

A software platform based on Leap Motion Controller (LMC) movements’ detection was developed. It allows measurements of clinically proved effective hand and finger exercises. The developed software allows representation of amplitude of each different movement, time interval for each movement, frequency of different movements, asymmetry of bilateral movements, standard deviation of signal amplitude, Poincaré plots. A serious game Collect Color Cube, was developed using Unity, C# scrips, and signals from LMC related to movements of the user’s hands and fingers.info:eu-repo/semantics/publishedVersio

Remote sensing technologies for physiotherapy assessment

The paper presents a set of remote, unobtrusive sensing technologies that can be used in upper and lower limbs rehabilitation monitoring. The advantages of using sensors based on microwave Doppler radar or infrared technologies for physiotherapy assessment are discussed. These technologies allow motion sensing at distance from monitored subject, reducing thus the discomfort produced by some wearable technologies for limbs movement assessment. The microwave radar that may be easily hidden into environment by nonmetallic parts allows remote sensing of human motion, providing information on user movements characteristics and patterns. The infrared technologies - infrared LEDs from Leap-Motion, infrared laser from Kinect depth sensor, and infrared thermography can be used for different movements' parameters evaluation. Visible for users, Leap-motion and Kinect sensors assure higher accuracy on body parts movements' detection at low computation load. These technologies are commonly used for virtual reality (VR) and augmented reality (AR) scenarios, in which the user motion patterns and the muscular activity might be analyzed. Thermography can be employed to evaluate the muscular loading. Muscular activity during movements training in physiotherapy can be estimated through skin temperature measurement before and after physical training. Issues related to the considered remote sensing technologies such as VR serious game for motor rehabilitation, signal processing and experimental results associated with microwave radar, infrared sensors and thermography for physiotherapy sensing are included in the paper.info:eu-repo/semantics/acceptedVersio

Rf sensing and processing methods for noninvasive health monitoring

Vulnerable populations include groups of people with a higher risk of poor health as a result of the limitations due to illness or disability. The health issues of vulnerable populations include three categories: physical, psychological, and social. The people with physical issues include high-risk mothers and infants, older adults and others with chronic illnesses and people with disabilities. The psychological issues of vulnerable populations include chronic mental conditions, such as bipolar disorder, major depression, and hyperactivity disorder, as well as substance abuse and those who are suicidal. The social issues in vulnerable populations include those living in abusive families, the homeless, etc. This dissertation concentrates on methods for helping two groups of vulnerable populations, namely, frail older adults and psychiatric hospital patients, to monitor their activity level, respiration rate, sleeping quality, and restless time in bed. In the first part of our work, we investigate a contactless monitoring system for psychiatric patients in a naturalistic hospital setting that can track their motion in bed, estimate the breathing rate of patients during their peaceful sleeping periods, and can be used to estimate a patient's restless time and sleep quality. Specifically, the contactless monitoring system uses a Vayyar Radar system with a carrier frequency of 6.014 GHz to capture all reflections by the FMCW (frequency modulation continuous waveform) signal. The Vayyar Radar system has been installed in a Psychiatric Center to capture 12 nights with over 135 hours of data from 7 patients. A depth camera and a thermal camera have also been installed and are used as the ground truth. The goal is to classify in bed and out of bed classes, quantify restlessness in bed, and determine the breathing rate while patients are lying in bed. We have simulated the psychiatric hospital set-up in the lab, where a respiration belt is used for ground truth, and tested the system with body postures of patients observed in the psychiatric hospital. We estimated respiration rate with different sleep postures, with the aim of investigating a contactless monitoring system for psychiatric patients in the hospital that can estimate the breathing rate of patients during typical sleeping postures, and find the torso area when the patients use other postures, such as reading books in bed or reversing the body on the bed. In the second part of our work, we investigate two methods for learning the room structure via radio wave reflections for longitudinal health monitoring of older adults in a naturalistic home setting. The goal is to use these data as part of a monitoring system that can be easily installed in a home with minimal configuration, for the purpose of detecting very early signs of illness and functional decline. Two studies are conducted using RF (radio frequency) sensing. The first method learns the structure from the RF clutter patterns and uses the beat frequency of the maximum peak in each chirp to calculate the wall position. The second method learns the room structure from active movement patterns and uses the open space between the clusters of active movement patterns to estimate the possible wall locations. Comparing the two results from these methods provides a more robust wall location. In addition, a background filter is designed based on the wall position, and the activity level of people in different rooms is estimated using a fuzzy rule system applied to the RF motion data

Recent development of respiratory rate measurement technologies

Respiratory rate (RR) is an important physiological parameter whose abnormity has been regarded as an important indicator of serious illness. In order to make RR monitoring simple to do, reliable and accurate, many different methods have been proposed for such automatic monitoring. According to the theory of respiratory rate extraction, methods are categorized into three modalities: extracting RR from other physiological signals, RR measurement based on respiratory movements, and RR measurement based on airflow. The merits and limitations of each method are highlighted and discussed. In addition, current works are summarized to suggest key directions for the development of future RR monitoring methodologies

Smart Sensors for Healthcare and Medical Applications

This book focuses on new sensing technologies, measurement techniques, and their applications in medicine and healthcare. Specifically, the book briefly describes the potential of smart sensors in the aforementioned applications, collecting 24 articles selected and published in the Special Issue “Smart Sensors for Healthcare and Medical Applications”. We proposed this topic, being aware of the pivotal role that smart sensors can play in the improvement of healthcare services in both acute and chronic conditions as well as in prevention for a healthy life and active aging. The articles selected in this book cover a variety of topics related to the design, validation, and application of smart sensors to healthcare

Telemedicine

Telemedicine is a rapidly evolving field as new technologies are implemented for example for the development of wireless sensors, quality data transmission. Using the Internet applications such as counseling, clinical consultation support and home care monitoring and management are more and more realized, which improves access to high level medical care in underserved areas. The 23 chapters of this book present manifold examples of telemedicine treating both theoretical and practical foundations and application scenarios

Analysis of Wireless Body-Centric Medical Sensors for Remote Healthcare

Aquesta tesi aborda el problema de trobar solucions confortables, de baixa potència i sense fils per aplicacions mèdiques. La tesi tracta els avantatges i les limitacions de tres tecnologies de comunicació diferents per la mesura de paràmetres del cos i mètodes per redissenyar sensors per avaluacions òptimes centrades en el cos. La tecnologia RFID es considera una de les solucions més influents per superar el problema del consum d'energia limitat, a causa de la presència de molts sensors connectats. També s'ha estudiat la tecnologia Bluetooth de baixa energia per resoldre els problemes de seguretat i la distància de lectura que, en general, representen el coll d'ampolla de RFID pels sensors de cos. Els dispositius analògics poden reduir dràsticament les necessitats d'energia a causa dels sensors i les comunicacions, considerant pocs elements i un mètode de transmissió simple. S'estudia un mètode de comunicació completament passiu, basat en FSS, que permet una distància de lectura raonable amb capacitats de detecció precises i confiables, que s'ha discutit en aquesta tesi. L'objectiu d'aquesta tesi és investigar múltiples tecnologies sense fils per dispositius portàtils per identificar solucions adequades per aplicacions particulars en el camp mèdic. El primer objectiu és demostrar la facilitat d'ús de les tecnologies econòmiques sense bateria com un indicador útil de paràmetres fisiopatològics mitjançant la investigació de les propietats de les etiquetes RFID. A més a més, s'ha abordat un aspecte més complex respecte a l'ús de petits components passius com sensors sense fils per trastorns del son. Per últim, un altre objectiu de la tesi és el desenvolupament d'un sistema completament autònom que utilitzi tecnologia BLE per obtenir propietats avançades mantenint baix tant el consum com el preuEsta tesis aborda el problema de encontrar soluciones confortables, inalámbricas y de baja potencia para aplicaciones médicas. La tesis discute las ventajas y limitaciones de tres tecnologías de comunicación diferentes para la medición en el cuerpo y los métodos para elegir y remodelar los sensores para evaluaciones óptimas centradas en el cuerpo. La tecnología RFID se considera una de las soluciones más influyentes para superar el consumo de energía limitado debido a la presencia de muchos sensores conectados. Además, la baja energía de Bluetooth se ha estudiado se ha estudiado la tecnologia Bluetooth de baja energia para resolver los problemas de seguridad y la distancia de lectura que, en general, representan el cuello de botella de la RFID para los sensores de cuerpo. Los dispositivos analógicos pueden reducir drásticamente las necesidades de energía debido a los sensores y las comunicaciones, considerando pocos elementos y un método de transmisión simple. Se estudia un método de comunicación completamente pasivo, basado en FSS, que permite una distancia de lectura razonable con capacidades de detección precisas y confiables, que se ha discutido en esta tesis. El objetivo de esta tesis es investigar múltiples tecnologías inalámbricas para dispositivos portátiles para identificar soluciones adecuadas para aplicaciones particulares en campos médicos. El primer objetivo es demostrar la facilidad de uso de las tecnologías económicas sin batería como un indicador útil de dichos parámetros fisiopatológicos mediante la investigación de las propiedades de las etiquetas RFID. Además, se ha abordado un aspecto más complejo con respecto al uso de pequeños componentes pasivos como sensores inalámbricos para enfermedades del sueño. Por último, un resultado de la tesis es desarrollar un sistema completamente autónomo que utilice la tecnología BLE para obtener propiedades avanzadas que mantengan la baja potencia y un precio bajo.This thesis addresses the problem of comfortable, low powered and, wireless solutions for specific body-worn sensing. The thesis discusses advantages and limitations of three different communication technologies for on body measurement and investigate methods to reshape sensors for optimum body-centric assessments. The RFID technology is considered one of the most influential solutions to overcome the limitated power consumption due to the presence of many sensors connected. Further, the Bluetooth low energy has been studied to solve security problems and reading distance that overall represent the bottleneck of the RFID for the body-worn sensors. Analog devices can drastically reduce the energy needs due to the sensors and the communications, considering few elements and a simple transmitting method. An entirely passive communication method, based on FSS is studied, enabling a reasonable reading distance with precise and reliable sensing capabilities, which has been discussed in this thesis. The objective of this thesis is to investigate multiple wireless technologies for wearable devices to identify suitable solutions for particular applications in medical fields. The first objective is to demonstrate the usability of the inexpensive battery-less technologies as a useful indicator of such a physio-pathological parameters by investigating the properties of the RFID tags. Furthermore, a more complex aspect regards the use of small passive components as wireless sensors for sleep diseases has been addressed. Lastly, an outcome of the thesis is to develop an entirely autonomous system using the BLE technology to obtain advanced properties keeping low power and a low price

Human activity classification using micro-Doppler signatures and ranging techniques

PhD ThesisHuman activity recognition is emerging as a very import research area due to its potential applications in surveillance, assisted living, and military operations. Various sensors including accelerometers, RFID, and cameras, have been applied to achieve automatic human activity recognition. Wearable sensor-based techniques have been well explored. However, some studies have shown that many users are more disinclined to use wearable sensors and also may forget to carry them. Consequently, research in this area started to apply contactless sensing techniques to achieve human activity recognition unobtrusively. In this research, two methods were investigated for human activity recognition, one method is radar-based and the other is using LiDAR (Light Detection and Ranging). Compared to other techniques, Doppler radar and LiDAR have several advantages including all-weather and all-day capabilities, non-contact and nonintrusive features. Doppler radar also has strong penetration to walls, clothes, trees, etc. LiDAR can capture accurate (centimetre-level) locations of targets in real-time. These characteristics make methods based on Doppler radar and LiDAR superior to other techniques. Firstly, this research measured micro-Doppler signatures of different human activities indoors and outdoors using Doppler radars. Micro-Doppler signatures are presented in the frequency domain to reflect different frequency shifts resulted from different components of a moving target. One of the major differences of this research in relation to other relevant research is that a simple pulsed radar system of very low-power was used. The outdoor experiments were performed in places of heavy clutter (grass, trees, uneven terrains), and confusers including animals and drones, were also considered in the experiments. Novel usages of machine learning techniques were implemented to perform subject classification, human activity classification, people counting, and coarse-grained localisation by classifying the micro-Doppler signatures. For the feature extraction of the micro-Doppler signatures, this research proposed the use of a two-directional twodimensional principal component analysis (2D2PCA). The results show that by applying 2D2PCA, the accuracy results of Support Vector Machine (SVM) and k-Nearest Neighbour (kNN) classifiers were greatly improved. A Convolutional Neural Network (CNN) was built for the target classifications of type, number, activity, and coarse localisation. The CNN model obtained very high classification accuracies (97% to 100%) for the outdoor experiments, which were superior to the results obtained by SVM and kNN. The indoor experiments measured several daily activities with the focus on dietary activities (eating and drinking). An overall classification rate of 92.8% was obtained in activity recognition in a kitchen scenario using the CNN. Most importantly, in nearly real-time, the proposed approach successfully recognized human activities in more than 89% of the time. This research also investigated the effects on the classification performance of the frame length of the sliding window, the angle of the direction of movement, and the number of radars used; providing valuable guidelines for machine learning modeling and experimental setup of micro-Doppler based research and applications. Secondly, this research used a two dimensional (2D) LiDAR to perform human activity detection indoors. LiDAR is a popular surveying method that has been widely used in localisation, navigation, and mapping. This research proposed the use of a 2D LiDAR to perform multiple people activity recognition by classifying their trajectories. Points collected by the LiDAR were clustered and classified into human and non-human classes. For the human class, the Kalman filter was used to track their trajectories, and the trajectories were further segmented and labelled with their corresponding activities. Spatial transformation was used for trajectory augmentation in order to overcome the problem of unbalanced classes and boost the performance of human activity recognition. Finally, a Long Short-term Memory (LSTM) network and a (Temporal Convolutional Network) TCN was built to classify the trajectory samples into fifteen activity classes. The TCN achieved the best result of 99.49% overall accuracy. In comparison, the proposed TCN slightly outperforms the LSTM. Both of them outperform hidden Markov Model (HMM), dynamic time warping (DTW), and SVM with a wide margin