Remote estimation of target height using unmanned air vehicles (UAVs)

Dissertation presented as partial requirement for obtaining the Master’s degree in Information Management, with a specialization in Business Intelligence and Knowledge ManagementEstimation of target height from videos is used for several applications, such as monitoring agricultural plants growth or, within surveillance scenarios, supporting the identification of persons of interest. Several studies have been conducted in this domain but, in almost all the cases, only fixed cameras were considered. Nowadays, lightweight UAVs are often employed for remote monitoring and surveillance activities due to their mobility capacity and freedom for camera orientation. This paper focuses on how the height could be swiftly performed with a gimballed camera installed into a UAV using a pinhole camera model after camera calibration and image distortion compensation. The model is tailored for UAV applications outdoor and generalized for any camera orientations defined by Euler angles. The procedure was tested with real data collected with a regular-market lightweight quad-copter. The data collected was also used to make an uncertainty analysis associated with the estimation. Finally, since the height of a person who is not standing perfectly vertical can be derived by relationships between body parts or human face features ratio, this paper proposes to retrieve the pixel spacing measured along the vertical target, called here Vertical Sample Distance (VSD), to quickly measure vertical sub-portions of the target

Non-contact vision-based deformation monitoring on bridge structures

Information on deformation is an important metric for bridge condition and performance assessment, e.g. identifying abnormal events, calibrating bridge models and estimating load carrying capacities, etc. However, accurate measurement of bridge deformation, especially for long-span bridges remains as a challenging task. The major aim of this research is to develop practical and cost-effective techniques for accurate deformation monitoring on bridge structures. Vision-based systems are taken as the study focus due to a few reasons: low cost, easy installation, desired sample rates, remote and distributed sensing, etc. This research proposes an custom-developed vision-based system for bridge deformation monitoring. The system supports either consumer-grade or professional cameras and incorporates four advanced video tracking methods to adapt to different test situations. The sensing accuracy is firstly quantified in laboratory conditions. The working performance in field testing is evaluated on one short-span and one long-span bridge examples considering several influential factors i.e. long-range sensing, low-contrast target patterns, pattern changes and lighting changes. Through case studies, some suggestions about tracking method selection are summarised for field testing. Possible limitations of vision-based systems are illustrated as well. To overcome observed limitations of vision-based systems, this research further proposes a mixed system combining cameras with accelerometers for accurate deformation measurement. To integrate displacement with acceleration data autonomously, a novel data fusion method based on Kalman filter and maximum likelihood estimation is proposed. Through field test validation, the method is effective for improving displacement accuracy and widening frequency bandwidth. The mixed system based on data fusion is implemented on field testing of a railway bridge considering undesired test conditions (e.g. low-contrast target patterns and camera shake). Analysis results indicate that the system offers higher accuracy than using a camera alone and is viable for bridge influence line estimation. With considerable accuracy and resolution in time and frequency domains, the potential of vision-based measurement for vibration monitoring is investigated. The proposed vision-based system is applied on a cable-stayed footbridge for deck deformation and cable vibration measurement under pedestrian loading. Analysis results indicate that the measured data enables accurate estimation of modal frequencies and could be used to investigate variations of modal frequencies under varying pedestrian loads. The vision-based system in this application is used for multi-point vibration measurement and provides results comparable to those obtained using an array of accelerometers

Map-Based Localization for Unmanned Aerial Vehicle Navigation

Unmanned Aerial Vehicles (UAVs) require precise pose estimation when navigating in indoor and GNSS-denied / GNSS-degraded outdoor environments. The possibility of crashing in these environments is high, as spaces are confined, with many moving obstacles. There are many solutions for localization in GNSS-denied environments, and many different technologies are used. Common solutions involve setting up or using existing infrastructure, such as beacons, Wi-Fi, or surveyed targets. These solutions were avoided because the cost should be proportional to the number of users, not the coverage area. Heavy and expensive sensors, for example a high-end IMU, were also avoided. Given these requirements, a camera-based localization solution was selected for the sensor pose estimation. Several camera-based localization approaches were investigated. Map-based localization methods were shown to be the most efficient because they close loops using a pre-existing map, thus the amount of data and the amount of time spent collecting data are reduced as there is no need to re-observe the same areas multiple times. This dissertation proposes a solution to address the task of fully localizing a monocular camera onboard a UAV with respect to a known environment (i.e., it is assumed that a 3D model of the environment is available) for the purpose of navigation for UAVs in structured environments. Incremental map-based localization involves tracking a map through an image sequence. When the map is a 3D model, this task is referred to as model-based tracking. A by-product of the tracker is the relative 3D pose (position and orientation) between the camera and the object being tracked. State-of-the-art solutions advocate that tracking geometry is more robust than tracking image texture because edges are more invariant to changes in object appearance and lighting. However, model-based trackers have been limited to tracking small simple objects in small environments. An assessment was performed in tracking larger, more complex building models, in larger environments. A state-of-the art model-based tracker called ViSP (Visual Servoing Platform) was applied in tracking outdoor and indoor buildings using a UAVs low-cost camera. The assessment revealed weaknesses at large scales. Specifically, ViSP failed when tracking was lost, and needed to be manually re-initialized. Failure occurred when there was a lack of model features in the cameras field of view, and because of rapid camera motion. Experiments revealed that ViSP achieved positional accuracies similar to single point positioning solutions obtained from single-frequency (L1) GPS observations standard deviations around 10 metres. These errors were considered to be large, considering the geometric accuracy of the 3D model used in the experiments was 10 to 40 cm. The first contribution of this dissertation proposes to increase the performance of the localization system by combining ViSP with map-building incremental localization, also referred to as simultaneous localization and mapping (SLAM). Experimental results in both indoor and outdoor environments show sub-metre positional accuracies were achieved, while reducing the number of tracking losses throughout the image sequence. It is shown that by integrating model-based tracking with SLAM, not only does SLAM improve model tracking performance, but the model-based tracker alleviates the computational expense of SLAMs loop closing procedure to improve runtime performance. Experiments also revealed that ViSP was unable to handle occlusions when a complete 3D building model was used, resulting in large errors in its pose estimates. The second contribution of this dissertation is a novel map-based incremental localization algorithm that improves tracking performance, and increases pose estimation accuracies from ViSP. The novelty of this algorithm is the implementation of an efficient matching process that identifies corresponding linear features from the UAVs RGB image data and a large, complex, and untextured 3D model. The proposed model-based tracker improved positional accuracies from 10 m (obtained with ViSP) to 46 cm in outdoor environments, and improved from an unattainable result using VISP to 2 cm positional accuracies in large indoor environments. The main disadvantage of any incremental algorithm is that it requires the camera pose of the first frame. Initialization is often a manual process. The third contribution of this dissertation is a map-based absolute localization algorithm that automatically estimates the camera pose when no prior pose information is available. The method benefits from vertical line matching to accomplish a registration procedure of the reference model views with a set of initial input images via geometric hashing. Results demonstrate that sub-metre positional accuracies were achieved and a proposed enhancement of conventional geometric hashing produced more correct matches - 75% of the correct matches were identified, compared to 11%. Further the number of incorrect matches was reduced by 80%

Application of computer vision for roller operation management

Compaction is the last and possibly the most important phase in construction of asphalt concrete (AC) pavements. Compaction densifies the loose (AC) mat, producing a stable surface with low permeability. The process strongly affects the AC performance properties. Too much compaction may cause aggregate degradation and low air void content facilitating bleeding and rutting. On the other hand too little compaction may result in higher air void content facilitating oxidation and water permeability issues, rutting due to further densification by traffic and reduced fatigue life. Therefore, compaction is a critical issue in AC pavement construction.;The common practice for compacting a mat is to establish a roller pattern that determines the number of passes and coverages needed to achieve the desired density. Once the pattern is established, the roller\u27s operator must maintain the roller pattern uniformly over the entire mat.;Despite the importance of uniform compaction to achieve the expected durability and performance of AC pavements, having the roller operator as the only mean to manage the operation can involve human errors.;With the advancement of technology in recent years, the concept of intelligent compaction (IC) was developed to assist the roller operators and improve the construction quality. Commercial IC packages for construction rollers are available from different manufacturers. They can provide precise mapping of a roller\u27s location and provide the roller operator with feedback during the compaction process.;Although, the IC packages are able to track the roller passes with impressive results, there are also major hindrances. The high cost of acquisition and potential negative impact on productivity has inhibited implementation of IC.;This study applied computer vision technology to build a versatile and affordable system to count and map roller passes. An infrared camera is mounted on top of the roller to capture the operator view. Then, in a near real-time process, image features were extracted and tracked to estimate the incremental rotation and translation of the roller. Image featured are categorized into near and distant features based on the user defined horizon. The optical flow is estimated for near features located in the region below the horizon. The change in roller\u27s heading is constantly estimated from the distant features located in the sky region. Using the roller\u27s rotation angle, the incremental translation between two frames will be calculated from the optical flow. The roller\u27s incremental rotation and translation will put together to develop a tracking map.;During system development, it was noted that in environments with thermal uniformity, the background of the IR images exhibit less featured as compared to images captured with optical cameras which are insensitive to temperature. This issue is more significant overnight, since nature elements are not able to reflect the heat energy from sun. Therefore to improve roller\u27s heading estimation where less features are available in the sky region a unique methodology that allows heading detection based on the asphalt mat edges was developed for this research. The heading measurements based on the slope of the asphalt hot edges will be added to the pool of the headings measured from sky region. The median of all heading measurements will be used as the incremental roller\u27s rotation for the tracking analysis.;The record of tracking data is used for QC/QA purposes and verifying the proper implementation of the roller pattern throughout a job constructed under the roller pass specifications.;The system developed during this research was successful in mapping roller location for few projects tested. However the system should be independently validated

Object Detection and Tracking for ASV

In this thesis automatic Object Detection system is presented. Object Detection is performed by different algorithms. As reading many literature we have observed that detecting objects in particular video sequence or by any surveillance cameras is a really challenging task in computer vision application because in sea the atmosphere affects a lot in the detection. Therefore we felt that there can be a wide range of possibilities are open in relation to detection. In order to improve the object detection, we developed image stabilization software on top of the image acquisition. First image stabilization has been performed over the raw data of ROAZ II. After achieving stabled video or images, object detection algorithm is performed using color based segmentation. Field tests have been performed with a data set from the ROAZ-II and during it shows the effectiveness of the approach. And system is able to achieve object detection in video or images with high accuracy

Portable and Scalable In-vehicle Laboratory Instrumentation for the Design of i-ADAS

According to the WHO (World Health Organization), world-wide deaths from injuries are projected to rise from 5.1 million in 1990 to 8.4 million in 2020, with traffic-related incidents as the major cause for this increase. Intelligent, Advanced Driving Assis­ tance Systems (i-ADAS) provide a number of solutions to these safety challenges. We developed a scalable in-vehicle mobile i-ADAS research platform for the purpose of traffic context analysis and behavioral prediction designed for understanding fun­ damental issues in intelligent vehicles. We outline our approach and describe the in-vehicle instrumentation

Advanced Map Matching Technologies and Techniques for Pedestrian/Wheelchair Navigation

Due to the constantly increasing technical advantages of mobile devices (such as smartphones), pedestrian/wheelchair navigation recently has achieved a high level of interest as one of smartphones’ potential mobile applications. While vehicle navigation systems have already reached a certain level of maturity, pedestrian/wheelchair navigation services are still in their infancy. By comparing vehicle navigation systems, a set of map matching requirements and challenges unique in pedestrian/wheelchair navigation is identified. To provide navigation assistance to pedestrians and wheelchair users, there is a need for the design and development of new map matching techniques. The main goal of this research is to investigate and develop advanced map matching technologies and techniques particular for pedestrian/wheelchair navigation services. As the first step in map matching, an adaptive candidate segment selection algorithm is developed to efficiently find candidate segments. Furthermore, to narrow down the search for the correct segment, advanced mathematical models are applied. GPS-based chain-code map matching, Hidden Markov Model (HMM) map matching, and fuzzy-logic map matching algorithms are developed to estimate real-time location of users in pedestrian/wheelchair navigation systems/services. Nevertheless, GPS signal is not always available in areas with high-rise buildings and even when there is a signal, the accuracy may not be high enough for localization of pedestrians and wheelchair users on sidewalks. To overcome these shortcomings of GPS, multi-sensor integrated map matching algorithms are investigated and developed in this research. These algorithms include a movement pattern recognition algorithm, using accelerometer and compass data, and a vision-based positioning algorithm to fill in signal gaps in GPS positioning. Experiments are conducted to evaluate the developed algorithms using real field test data (GPS coordinates and other sensors data). The experimental results show that the developed algorithms and the integrated sensors, i.e., a monocular visual odometry, a GPS, an accelerometer, and a compass, can provide high-quality and uninterrupted localization services in pedestrian/wheelchair navigation systems/services. The map matching techniques developed in this work can be applied to various pedestrian/wheelchair navigation applications, such as tracking senior citizens and children, or tourist service systems, and can be further utilized in building walking robots and automatic wheelchair navigation systems

Camera Marker Networks for Pose Estimation and Scene Understanding in Construction Automation and Robotics.

The construction industry faces challenges that include high workplace injuries and fatalities, stagnant productivity, and skill shortage. Automation and Robotics in Construction (ARC) has been proposed in the literature as a potential solution that makes machinery easier to collaborate with, facilitates better decision-making, or enables autonomous behavior. However, there are two primary technical challenges in ARC: 1) unstructured and featureless environments; and 2) differences between the as-designed and the as-built. It is therefore impossible to directly replicate conventional automation methods adopted in industries such as manufacturing on construction sites. In particular, two fundamental problems, pose estimation and scene understanding, must be addressed to realize the full potential of ARC. This dissertation proposes a pose estimation and scene understanding framework that addresses the identified research gaps by exploiting cameras, markers, and planar structures to mitigate the identified technical challenges. A fast plane extraction algorithm is developed for efficient modeling and understanding of built environments. A marker registration algorithm is designed for robust, accurate, cost-efficient, and rapidly reconfigurable pose estimation in unstructured and featureless environments. Camera marker networks are then established for unified and systematic design, estimation, and uncertainty analysis in larger scale applications. The proposed algorithms' efficiency has been validated through comprehensive experiments. Specifically, the speed, accuracy and robustness of the fast plane extraction and the marker registration have been demonstrated to be superior to existing state-of-the-art algorithms. These algorithms have also been implemented in two groups of ARC applications to demonstrate the proposed framework's effectiveness, wherein the applications themselves have significant social and economic value. The first group is related to in-situ robotic machinery, including an autonomous manipulator for assembling digital architecture designs on construction sites to help improve productivity and quality; and an intelligent guidance and monitoring system for articulated machinery such as excavators to help improve safety. The second group emphasizes human-machine interaction to make ARC more effective, including a mobile Building Information Modeling and way-finding platform with discrete location recognition to increase indoor facility management efficiency; and a 3D scanning and modeling solution for rapid and cost-efficient dimension checking and concise as-built modeling.PHDCivil EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/113481/1/cforrest_1.pd