Connecting Disjoint Nodes Through a UAV-Based Wireless Network for Bridging Communication Using IEEE 802.11 Protocols

Cooperative aerial wireless networks composed of small unmanned aerial vehicles(UAVs) are easy and fast to deploy and provide on the fly communication facilities in situations where part of the communication infrastructure is destroyed and the survivors need to be rescued on emergency basis. In this article, we worked on such a cooperative aerial UAV-based wireless network to connect the two participating stations. The proposed method provides on the fly communication facilities to connect the two ground stations through a wireless access point (AP) mounted on a UAV using the IEEE 802.11a/b/g/n. We conducted our experiments both indoor and outdoor to investigate the performance of IEEE 802.11 protocol stack including a/b/g/n. We envisioned two different cases: line of sight (LoS) and non-line of sight (NLoS). In LoS, we consider three different scenarios with respect to UAV altitude and performed the experiments at different altitudes to measure the performance and applicability of the proposed system in catastrophic situations and healthcare applications. Similarly, for NLoS, we performed a single set of experiments in an indoor environment. Based on our observations from the experiments, 802.11n at 2.4 GHz outperforms the other IEEE protocols in terms of data rate followed by 802.11n at 5 GHz band. We also concluded that 802.11n is the more suitable protocol that can be practiced in disastrous situations such as rescue operations and healthcare applications

Adoption of vehicular ad hoc networking protocols by networked robots

This paper focuses on the utilization of wireless networking in the robotics domain. Many researchers have already equipped their robots with wireless communication capabilities, stimulated by the observation that multi-robot systems tend to have several advantages over their single-robot counterparts. Typically, this integration of wireless communication is tackled in a quite pragmatic manner, only a few authors presented novel Robotic Ad Hoc Network (RANET) protocols that were designed specifically with robotic use cases in mind. This is in sharp contrast with the domain of vehicular ad hoc networks (VANET). This observation is the starting point of this paper. If the results of previous efforts focusing on VANET protocols could be reused in the RANET domain, this could lead to rapid progress in the field of networked robots. To investigate this possibility, this paper provides a thorough overview of the related work in the domain of robotic and vehicular ad hoc networks. Based on this information, an exhaustive list of requirements is defined for both types. It is concluded that the most significant difference lies in the fact that VANET protocols are oriented towards low throughput messaging, while RANET protocols have to support high throughput media streaming as well. Although not always with equal importance, all other defined requirements are valid for both protocols. This leads to the conclusion that cross-fertilization between them is an appealing approach for future RANET research. To support such developments, this paper concludes with the definition of an appropriate working plan

Performance Evaluation of Ad Hoc Routing in a Swarm of Autonomous Aerial Vehicles

This thesis investigates the performance of three mobile ad hoc routing protocols in the context of a swarm of autonomous unmanned aerial vehicles (UAVs). It is proposed that a wireless network of nodes having an average of 5.1774 log n neighbors, where n is the total number of nodes in the network, has a high probability of having no partitions. By decreasing transmission range while ensuring network connectivity, and implementing multi-hop routing between nodes, spatial multiplexing is exploited whereby multiple pairs of nodes simultaneously transmit on the same channel. The proposal is evaluated using the Greedy Perimeter Stateless Routing (GPSR), Optimized Link State Routing (OLSR), and Ad hoc On-demand Distance Vector (AODV) routing protocols in the context of a swarm of UAVs using the OPNET network simulation tool. The first-known implementation of GPSR in OPNET is constructed, and routing performance is observed when routing protocol, number of nodes, transmission range, and traffic workload are varied. Performance is evaluated based on proportion of packets successfully delivered, average packet hop count, and average end-to-end delay of packets received. Results indicate that the routing protocol choice has a significant impact on routing performance. While GPSR successfully delivers 50% more packets than OLSR, and experiences a 53% smaller end-to-end delay than AODV when routing packets in a swarm of UAVs, increasing transmission range and using direct transmission to destination nodes with no routing results in a level of performance not achieved using any of the routing protocols evaluated

Investigating the deployability of VoIP services over wireless interconnected micro aerial vehicles

Emerging technological devices, such as Unmanned Aircraft Vehicles (UAV) and Single Board Computers (SBC), are being increasingly employed in recent years, thanks to the advances in electronics and the wide variety of sensors that are endowed. This paper aims at analyzing the viability of deploying multimedia services, focusing on the voice scenario, over wireless interconnected Micro Air Vehicles (MAV), also known as drones. Toward this end, we assessed the performance both of the embedded wireless cards of current drones and also SBCs, which may be carried as payload in existing UAV solutions. Driven by the results obtained in these experiments, we then deployed an operational VoIP service over a network of commercial MAVs, to perform an experimental analysis on the resource capabilities of these devices and demonstrate that this type of service can certainly be used.This article has been partially supported by the European H2020 5GinFIRE project (grant agreement 732497) and the 5G‐City project (TEC2016‐76795‐C6‐3‐R) funded by the Spanish Ministry of Economy and Competitiveness

Hybrid LoRa-IEEE 802.11s Opportunistic Mesh Networking for Flexible UAV Swarming

Unmanned Aerial Vehicles (UAVs) and small drones are nowadays being widely used in heterogeneous use cases: aerial photography, precise agriculture, inspections, environmental data collection, search-and-rescue operations, surveillance applications, and more. When designing UAV swarm-based applications, a key "ingredient" to make them effective is the communication system (possible involving multiple protocols) shared by flying drones and terrestrial base stations. When compared to ground communication systems for swarms of terrestrial vehicles, one of the main advantages of UAV-based communications is the presence of direct Line-of-Sight (LOS) links between flying UAVs operating at an altitude of tens of meters, often ensuring direct visibility among themselves and even with some ground Base Transceiver Stations (BTSs). Therefore, the adoption of proper networking strategies for UAV swarms allows users to exchange data at distances (significantly) longer than in ground applications. In this paper, we propose a hybrid communication architecture for UAV swarms, leveraging heterogeneous radio mesh networking based on long-range communication protocols—such as LoRa and LoRaWAN—and IEEE 802.11s protocols. We then discuss its strengths, constraints, viable implementation, and relevant reference use cases