A critical analysis of research potential, challenges and future directives in industrial wireless sensor networks

In recent years, Industrial Wireless Sensor Networks (IWSNs) have emerged as an important research theme with applications spanning a wide range of industries including automation, monitoring, process control, feedback systems and automotive. Wide scope of IWSNs applications ranging from small production units, large oil and gas industries to nuclear fission control, enables a fast-paced research in this field. Though IWSNs offer advantages of low cost, flexibility, scalability, self-healing, easy deployment and reformation, yet they pose certain limitations on available potential and introduce challenges on multiple fronts due to their susceptibility to highly complex and uncertain industrial environments. In this paper a detailed discussion on design objectives, challenges and solutions, for IWSNs, are presented. A careful evaluation of industrial systems, deadlines and possible hazards in industrial atmosphere are discussed. The paper also presents a thorough review of the existing standards and industrial protocols and gives a critical evaluation of potential of these standards and protocols along with a detailed discussion on available hardware platforms, specific industrial energy harvesting techniques and their capabilities. The paper lists main service providers for IWSNs solutions and gives insight of future trends and research gaps in the field of IWSNs

Power saving MAC protocols in wireless sensor networks: a survey

In a wireless sensor network, energy is almost always the greatest limitation. Energy sources are restricted in many of the environments where nodes are deployed, limiting them to the use of batteries for power. Therefore, conserving energy is supremely important, however, such a task poses many challenges to hardware and protocol design. One of the greatest problems faced is reducing the energy consumption of the communications systems, which represents a substantial amount of the total consumption. This paper surveys the most recent schemes designed to reduce the communications module energy consumption with a focus on novel MAC protocols for ad-hoc wireless sensor networks. It initially describes the many challenges involved, then it analyses each protocol individually. Finally, the presented protocols are compared and the issues that remain open are raised for further research

Power saving MAC protocols in wireless sensor networks: a survey

In a wireless sensor network, energy is almost always the greatest limitation. Energy sources are restricted in many of the environments where nodes are deployed, limiting them to the use of batteries for power. Therefore, conserving energy is supremely important, however, such a task poses many challenges to hardware and protocol design. One of the greatest problems faced is reducing the energy consumption of the communications systems, which represents a substantial amount of the total consumption. This paper surveys the most recent schemes designed to reduce the communications module energy consumption with a focus on novel MAC protocols for ad-hoc wireless sensor networks. It initially describes the many challenges involved, then it analyses each protocol individually. Finally, the presented protocols are compared and the issues that remain open are raised for further research.info:eu-repo/semantics/publishedVersio

Energy Optimization Efficiency in Wireless Sensor Networks for Forest Fire Detection:: An Innovative Sleep Technique

Wireless Sensor Networks (WSNs) have the potential to play a significant role in forest fire detection and prevention. However, limited resources, such as short battery life pose challenges for the energy efficiency and longevity of WSN-based IoT networks. This paper focused on the energy efficiency aspect and proposed the ECP-LEACH protocol to optimize energy consumption in forest fire detection cases. The proposed protocol consists of two main components: a threshold monitoring module and a sleep scheduling module. The threshold monitoring module continuously monitors energy consumption and triggers sleep mode for nodes surpassing the predetermined threshold. The ECP-LEACH protocol offers a promising solution for improving energy efficiency in WSN-based IoT networks for forest fire detection. By optimizing sleep scheduling and duty cycles, the ECP-LEACH protocol enables significant energy savings and extended network lifetim

Survey: energy efficient protocols using radio scheduling in wireless sensor network

An efficient energy management scheme is crucial factor for design and implementation of any sensor network. Almost all sensor networks are structured with numerous small sized, low cost sensor devices which are scattered over the large area. To improvise the network performance by high throughput with minimum energy consumption, an energy efficient radio scheduling MAC protocol is effective solution, since MAC layer has the capability to collaborate with distributed wireless networks. The present survey study provides relevant research work towards radio scheduling mechanism in the design of energy efficient wireless sensor networks (WSNs). The various radio scheduling protocols are exist in the literature, which has some limitations. Therefore, it is require developing a new energy efficient radio scheduling protocol to perform multi tasks with minimum energy consumption (e.g. data transmission). The most of research studies paying more attention towards to enhance the overall network lifetime with the aim of using energy efficient scheduling protocol. In that context, this survey study overviews the different categories of MAC based radio scheduling protocols and those protocols are measured by evaluating their data transmission capability, energy efficiency, and network performance. With the extensive analysis of existing works, many research challenges are stated. Also provides future directions for new WSN design at the end of this survey

QoS BASED ENERGY EFFICIENT ROUTING IN WIRELESS SENSOR NETWORK

A Wireless Sensor Networks (WSN) is composed of a large number of low-powered sensor nodes that are randomly deployed to collect environmental data. In a WSN, because of energy scarceness, energy efficient gathering of sensed information is one of the most critical issues. Thus, most of the WSN routing protocols found in the literature have considered energy awareness as a key design issue. Factors like throughput, latency and delay are not considered as critical issues in these protocols. However, emerging WSN applications that involve multimedia and imagining sensors require end-to-end delay within acceptable limits. Hence, in addition to energy efficiency, the parameters (delay, packet loss ratio, throughput and coverage) have now become issues of primary concern. Such performance metrics are usually referred to as the Quality of Service (QoS) in communication systems. Therefore, to have efficient use of a sensor node’s energy, and the ability to transmit the imaging and multimedia data in a timely manner, requires both a QoS based and energy efficient routing protocol. In this research work, a QoS based energy efficient routing protocol for WSN is proposed. To achieve QoS based energy efficient routing, three protocols are proposed, namely the QoS based Energy Efficient Clustering (QoSEC) for a WSN, the QoS based Energy Efficient Sleep/Wake Scheduling (QoSES) for a WSN, and the QoS based Energy Efficient Mobile Sink (QoSEM) based Routing for a Clustered WSN. Firstly, in the QoSEC, to achieve energy efficiency and to prolong network/coverage lifetime, some nodes with additional energy resources, termed as super-nodes, in addition to normal capability nodes, are deployed. Multi-hierarchy clustering is done by having super-nodes (acting as a local sink) at the top tier, cluster head (normal node) at the middle tier, and cluster member (normal node) at the lowest tier in the hierarchy. Clustering within normal sensor nodes is done by optimizing the network/coverage lifetime through a cluster-head-selection algorithm and a sleep/wake scheduling algorithm. QoSEC resolves the hot spot problem and prolongs network/coverage lifetime. Secondly, the QoSES addressed the delay-minimization problem in sleep/wake scheduling for event-driven sensor networks for delay-sensitive applications. For this purpose, QoSES assigns different sleep/wake intervals (longer wake interval) to potential overloaded nodes, according to their varied traffic load requirement defined a) by node position in the network, b) by node topological importance, and c) by handling burst traffic in the proximity of the event occurrence node. Using these heuristics, QoSES minimizes the congestion at nodes having heavy traffic loads and ultimately reduces end-to-end delay while maximizing the throughput. Lastly, the QoSEM addresses hot spot problem, delay minimization, and QoS assurance. To address hot-spot problem, mobile sink is used, that move in the network to gather data by virtue of which nodes near to the mobile sink changes with each movement, consequently hot spot problem is minimized. To achieve delay minimization, static sink is used in addition to the mobile sink. Delay sensitive data is forwarded to the static sink, while the delay tolerant data is sent through the mobile sink. For QoS assurance, incoming traffic is divided into different traffic classes and each traffic class is assigned different priority based on their QoS requirement (bandwidth, delay) determine by its message type and content. Furthermore, to minimize delay in mobile sink data gathering, the mobile sink is moved throughout the network based on the priority messages at the nodes. Using these heuristics, QoSEM incur less end-to-end delay, is energy efficient, as well as being able to ensure QoS. Simulations are carried out to evaluate the performance of the proposed protocols of QoSEC, QoSES and QoSEM, by comparing their performance with the established contemporary protocols. Simulation results have demonstrated that when compared with contemporary protocols, each of the proposed protocol significantly prolong the network and coverage lifetime, as well as improve the other QoS routing parameters, such as delay, packet loss ratio, and throughput

Energy-efficient MAC protocols for wireless sensor networks: a survey

MAC Protocols enables sensor nodes of the same WSN to access a common shared communication channel. Many researchers have proposed different solutions explaining how to design and implement these protocols. The main goal of most MACs protocols is how to prolong lifetime of the WSN as long as possible by reducing energy consumption since it is often impossible to change or to recharge sensors’ batteries. The majority of these protocols designed for WSN are based on “duty-cycle” technique. Every node of the WSN operates on two periods: active period and sleep period to save energy. Until now (to our knowledge) there is no ideal protocol for this purpose. The main reason relies on the lack of standardization at lower layers (physical layer) and (physical) sensor hardware.  Therefore, the MAC protocol choice remains application-dependent. A useful MAC protocol should be able to adapt to network changes (topology, nodes density and network size). This paper surveys MAC protocols for WSNs and discusses the main characteristics, advantages and disadvantages of currently popular protocols

Energy-Efficient Boarder Node Medium Access Control Protocol for Wireless Sensor Networks

This paper introduces the design, implementation, and performance analysis of the scalable and mobility-aware hybrid protocol named boarder node medium access control (BN-MAC) for wireless sensor networks (WSNs), which leverages the characteristics of scheduled and contention-based MAC protocols. Like contention-based MAC protocols, BN-MAC achieves high channel utilization, network adaptability under heavy traffic and mobility, and low latency and overhead. Like schedule-based MAC protocols, BN-MAC reduces idle listening time, emissions, and collision handling at low cost at one-hop neighbor nodes and achieves high channel utilization under heavy network loads. BN-MAC is particularly designed for region-wise WSNs. Each region is controlled by a boarder node (BN), which is of paramount importance. The BN coordinates with the remaining nodes within and beyond the region. Unlike other hybrid MAC protocols, BN-MAC incorporates three promising models that further reduce the energy consumption, idle listening time, overhearing, and congestion to improve the throughput and reduce the latency. One of the models used with BN-MAC is automatic active and sleep (AAS), which reduces the ideal listening time. When nodes finish their monitoring process, AAS lets them automatically go into the sleep state to avoid the idle listening state. Another model used in BN-MAC is the intelligent decision-making (IDM) model, which helps the nodes sense the nature of the environment. Based on the nature of the environment, the nodes decide whether to use the active or passive mode. This decision power of the nodes further reduces energy consumption because the nodes turn off the radio of the transceiver in the passive mode. The third model is the least-distance smart neighboring search (LDSNS), which determines the shortest efficient path to the one-hop neighbor and also provides cross-layering support to handle the mobility of the nodes. The BN-MAC also incorporates a semi-synchronous feature with a low duty cycle, which is advantageous for reducing the latency and energy consumption for several WSN application areas to improve the throughput. BN-MAC uses a unique window slot size to enhance the contention resolution issue for improved throughput. BN-MAC also prefers to communicate within a one-hop destination using Anycast, which maintains load balancing to maintain network reliability. BN-MAC is introduced with the goal of supporting four major application areas: monitoring and behavioral areas, controlling natural disasters, human-centric applications, and tracking mobility and static home automation devices from remote places. These application areas require a congestion-free mobility-supported MAC protocol to guarantee reliable data delivery. BN-MAC was evaluated using network simulator-2 (ns2) and compared with other hybrid MAC protocols, such as Zebra medium access control (Z-MAC), advertisement-based MAC (A-MAC), Speck-MAC, adaptive duty cycle SMAC (ADC-SMAC), and low-power real-time medium access control (LPR-MAC). The simulation results indicate that BN-MAC is a robust and energy-efficient protocol that outperforms other hybrid MAC protocols in the context of quality of service (QoS) parameters, such as energy consumption, latency, throughput, channel access time, successful delivery rate, coverage efficiency, and average duty cycle.https://doi.org/10.3390/s14030507

環境発電を用いた通信システムのための高効率MACプロトコルの実環境特性に関する研究

近年、高範囲の環境情報を効率的に長期間観測する技術として，無線センサネットワーク（WSNs: Wireless Sensor Networks）への注目が高まっている．さらに各センサ端末にエナジーハーベスティング（EH: Energy Harvesting）電源を具備することで，半永久的に情報を取得可能なWSNsの実現が期待されている．しかし，EH電源のみを用いたWSNsでは，各端末は一次電池ではなく，自然界から回収される電力のみによって動作するため，各端末の動作電源は微弱かつ確率的に変動する性質をもつ．そのため各端末の消費電力がEH電源からの回収電力を上回った場合は，各端末が電池切れを引き起こし，ネットワークが動作不能となることが懸念される．よって，各端末の電池切れに対してロバスト性をもち，通信の必要が生じた時のみ通信を行うことで，省電力性を達成する方式が必要となる．　媒体アクセス制御（MAC: Medium Access Control）層における研究では，端末間の時間同期を行うことなく，日和見的に通信を行う受信機駆動型MACが検討されている．特に，Intermittent-receiver driven data transmission（IRDT）は，高い省電力性と通信品質を達成する通信方式として知られている．IRDTは，各端末の供給電力が確率的に変動することを考慮していない．そのため，EH電源を用いたWSNsにおいては，回収電力が小さい端末が動作不能に陥る可能性があり，通信品質の劣化を引き起こす．そこでIRDTに対して，EH電源からの回収電力の多寡と通信可能端末数の情報を用いて，適応的に各端末が間欠間隔を制御することで消費電力制御を可能にしたEnergy-Neutral Receiver-Initiated MAC（ENRI-MAC）が提案されており，IRDTに比べ，高い通信品質を達成可能であることが示されている．しかし，ENRI-MACの特性評価は，各端末の回収電力を3つのクラスタに分類することで回収電力の多寡を考慮した疑似的なモデルで性能評価を行ったものであり，実環境に則して空間的・時間的に回収電力が変化するモデルにおいて，同様に高い通信品質を達成するかについては議論の余地がある．　そこで本研究では，ENRI-MACの間欠間隔の動的制御機能が通信品質を改善し得るかを評価するため，実環境の回収電力モデルに即した特性評価を行う．回収電力は環境的要因により変動し，同一の実験環境で評価することが困難であるため，今回は実環境に多数の照度センサを配置することで，日中の照度を実測し，この値を回収電力の実測値として用いた計算機シミュレーションを行う．数値評価を通じて，実環境では，間欠間隔の伸延を行うことで自端末の消費電力を低減する機能が，他端末の消費電力を著しく増加させてしまい，ネットワーク内に電池切れを連鎖的に引き起こし，通信品質を劣化させる可能性があることを明らかにする．　この問題を解決するために，本稿ではENRI-MACにおいて提案される間欠間隔設計を見直すことで，回収電力をENRI-MACよりも効率的に利用可能な間欠間隔を制御可能改良された改良ENRI-MACを提案する．さらに，先に述べた実環境に即した回収電力モデルにおいて，提案する改良ENRI-MACの間欠間隔設計が高い通信品質を達成可能であることを示す．電気通信大学201

Energy Efficient and Secure Wireless Sensor Networks Design

Wireless Sensor Networks (WSNs) are emerging technologies that have the ability to sense, process, communicate, and transmit information to a destination, and they are expected to have significant impact on the efficiency of many applications in various fields. The resource constraint such as limited battery power, is the greatest challenge in WSNs design as it affects the lifetime and performance of the network. An energy efficient, secure, and trustworthy system is vital when a WSN involves highly sensitive information. Thus, it is critical to design mechanisms that are energy efficient and secure while at the same time maintaining the desired level of quality of service. Inspired by these challenges, this dissertation is dedicated to exploiting optimization and game theoretic approaches/solutions to handle several important issues in WSN communication, including energy efficiency, latency, congestion, dynamic traffic load, and security. We present several novel mechanisms to improve the security and energy efficiency of WSNs. Two new schemes are proposed for the network layer stack to achieve the following: (a) to enhance energy efficiency through optimized sleep intervals, that also considers the underlying dynamic traffic load and (b) to develop the routing protocol in order to handle wasted energy, congestion, and clustering. We also propose efficient routing and energy-efficient clustering algorithms based on optimization and game theory. Furthermore, we propose a dynamic game theoretic framework (i.e., hyper defense) to analyze the interactions between attacker and defender as a non-cooperative security game that considers the resource limitation. All the proposed schemes are validated by extensive experimental analyses, obtained by running simulations depicting various situations in WSNs in order to represent real-world scenarios as realistically as possible. The results show that the proposed schemes achieve high performance in different terms, such as network lifetime, compared with the state-of-the-art schemes