QoS-Based Web Service Discovery in Mobile Ad Hoc Networks Using Swarm Strategies

Mobile ad hoc networks are noncentralised, multihop, wireless networks that lack a common infrastructure and hence require self-organisation. Their infrastructureless and dynamic nature entails the implementation of a new set of networking technologies in order to provide efficient end-to-end communication according to the principles of the standard TCP/IP suite. Routing, IP address autoconfiguration and Web service discovery are among the most challenging tasks in the ad hoc network domain. Swarm intelligence is a relatively new approach to problem solving that takes inspiration from the social behaviours of insects, such as ants and bees. Self-organization, decentralization, adaptivity, robustness, and scalability make swarm intelligence a successful design paradigm for the above-mentioned problems. In this paper we proposeBeeAdHocServiceDiscovery, a new service discovery algorithm based on the bee metaphor, which also takes into account quality metrics estimates. The protocol has been specifically designed to work in mobile ad hoc network scenarios operating withBeeadhoc, a well-known routing algorithm inspired by nature. We present both the protocol strategy and the formal evaluation of the discovery overhead and route optimality metrics showing thatBeeAdHocServiceDiscoveryguarantees valuable performances even in large scale ad hoc wireless networks. Eventually, future research suggestions are sketched

Proposta de um protocolo de roteamento autoconfigurável para redes mesh em Bluetooth Low Energy (BLE) baseado em proactive source routing

Orientador: Yuzo IanoTese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Elétrica e de ComputaçãoResumo: A Internet das Coisas (Internet of Things ¿ IoT) visa a criação de ambientes inteligentes como domótica, comunicação intra-veicular e redes de sensores sem fio (Wireless Sensor Network ¿ WSN), sendo que atualmente essa tecnologia vem crescendo de forma rápida. Uma das tecnologias sem fio utilizada para aplicações de curta distância que se encontra mais acessível à população, em geral, é o Bluetooth. No final de 2010, o Bluetooth Special Interest Group (Bluetooth SIG), lançou a especificação Bluetooth 4.0 e, como parte dessa especificação, tem-se o Bluetooth Low Energy (BLE). O BLE é uma tecnologia sem fio de baixíssimo consumo de potência, que pode ser alimentada por uma bateria tipo moeda, ou até mesmo por indução elétrica (energy harvesting). A natureza do Bluetooth (e BLE) é baseada na conexão do tipo Mestre/Escravo. Muitos estudos mostram como criar redes mesh baseadas no Bluetooth clássico, que são conhecidas como Scatternets, onde alguns nós são utilizados como escravos com o objetivo de repassar os dados entre os mestres. Contudo, o BLE não tinha suporte para a mudança entre mestre e escravo até o lançamento da especificação Bluetooth 4.1, em 2013. A capacidade de uma tecnologia sem fio para IoT de criar uma rede ad-hoc móvel (Mobile Ad-hoc Network ¿ MANET) é vital para poder suportar uma grande quantidade de sensores, periféricos e dispositivos que possam coexistir em qualquer ambiente. Este trabalho visa propor um novo método de autoconfiguração para BLE, com descoberta de mapa de roteamento e manutenção, sem a necessidade de mudanças entre mestre e escravo, sendo compatível com os dispositivos Bluetooth 4.0, assim como com os 4.1 e mais recentes. Qualquer protocolo de mensagens pode aproveitar o método proposto para descobrir e manter a topologia de rede mesh em cada um dos seus nósAbstract: Nowadays, the Internet of Things (IoT) is spreading rapidly towards creating smart environments. Home automation, intra-vehicular interaction, and wireless sensor networks (WSN) are among the most popular applications discussed in IoT literature. One of the most available and popular wireless technologies for short-range operations is Bluetooth. In late 2010, the Bluetooth Special Interest Group (SIG) launched the Bluetooth 4.0 Specification, which brings Bluetooth Low Energy (BLE) as part of the specification. BLE characterises as being a very low power wireless technology, capable of working on a coin-cell or even by energy scavenging. Nevertheless, the nature of Bluetooth (and BLE) has always been a connection-oriented communication in a Master/Slave configuration. Several studies exist showing how to create mesh networks for Classic Bluetooth, called Scatternets, by utilizing some nodes as slaves to relay data between Masters. However, BLE didn¿t support role changing until the 4.1 Specification released in 2013. The capability of a wireless technology to create a Mobile Ad-Hoc Network (MANET) is vital for supporting the plethora of sensors, peripherals, and devices that could coexist in any IoT environment. This work focuses on proposing a new autoconfiguring dynamic address allocation scheme for a BLE Ad-Hoc network, and a network map discovery and maintenance mechanism that doesn¿t require role changing, thus being possible to implement it in 4.0 compliant devices as well as 4.1 or later to develop a MANET. Any ad-hoc routing protocol can utilise the proposed method to discover, keep track, and maintain the mesh network node topology in each of their nodesDoutoradoTelecomunicações e TelemáticaDoutor em Engenharia ElétricaCAPE

Adoption of vehicular ad hoc networking protocols by networked robots

This paper focuses on the utilization of wireless networking in the robotics domain. Many researchers have already equipped their robots with wireless communication capabilities, stimulated by the observation that multi-robot systems tend to have several advantages over their single-robot counterparts. Typically, this integration of wireless communication is tackled in a quite pragmatic manner, only a few authors presented novel Robotic Ad Hoc Network (RANET) protocols that were designed specifically with robotic use cases in mind. This is in sharp contrast with the domain of vehicular ad hoc networks (VANET). This observation is the starting point of this paper. If the results of previous efforts focusing on VANET protocols could be reused in the RANET domain, this could lead to rapid progress in the field of networked robots. To investigate this possibility, this paper provides a thorough overview of the related work in the domain of robotic and vehicular ad hoc networks. Based on this information, an exhaustive list of requirements is defined for both types. It is concluded that the most significant difference lies in the fact that VANET protocols are oriented towards low throughput messaging, while RANET protocols have to support high throughput media streaming as well. Although not always with equal importance, all other defined requirements are valid for both protocols. This leads to the conclusion that cross-fertilization between them is an appealing approach for future RANET research. To support such developments, this paper concludes with the definition of an appropriate working plan

Mobile-IP ad-hoc network MPLS-based with QoS support.

The support for Quality of Service (QoS) is the main focus of this thesis. Major issues and challenges for Mobile-IP Ad-Hoc Networks (MANETs) to support QoS in a multi-layer manner are considered discussed and investigated through simulation setups. Different parameters contributing to the subjective measures of QoS have been considered and consequently, appropriate testbeds were formed to measure these parameters and compare them to other schemes to check for superiority. These parameters are: Maximum Round-Trip Delay (MRTD), Minimum Bandwidth Guaranteed (MBG), Bit Error Rate (BER), Packet Loss Ratio (PER), End-To-End Delay (ETED), and Packet Drop Ratio (PDR) to name a few. For network simulations, NS-II (Network Simulator Version II) and OPNET simulation software systems were used.Dept. of Electrical and Computer Engineering. Paper copy at Leddy Library: Theses & Major Papers - Basement, West Bldg. / Call Number: Thesis2005 .A355. Source: Masters Abstracts International, Volume: 44-03, page: 1444. Thesis (M.Sc.)--University of Windsor (Canada), 2005

Effective bootstrapping of Peer-to Peer networks over Mobile Ad-hoc networks

Mobile Ad-hoc Networks (MANETs) and Peer-to-Peer (P2P) networks are vigorous, revolutionary communication technologies in the 21st century. They lead the trend of decentralization. Decentralization will ultimately win clients over client/server model, because it gives ordinary network users more control, and stimulates their active participation. It is a determinant factor in shaping the future of networking. MANETs and P2P networks are very similar in nature. Both are dynamic, distributed. Both use multi-hop broadcast or multicast as major pattern of traffic. Both set up connection by self-organizing and maintain connection by self-healing. Embodying the slogan networking without networks, both abandoned traditional client/server model and disclaimed pre-existing infrastructure. However, their status quo levels of real world application are widely divergent. P2P networks are now accountable for about 50 ~ 70% internet traffic, while MANETs are still primarily in the laboratory. The interesting and confusing phenomenon has sparked considerable research effort to transplant successful approaches from P2P networks into MANETs. While most research in the synergy of P2P networks and MANETs focuses on routing, the network bootstrapping problem remains indispensable for any such transplantation to be realized. The most pivotal problems in bootstrapping are: (1) automatic configuration of nodes addresses and IDs, (2) topology discovery and transformation in different layers and name spaces. In this dissertation research, we have found novel solutions for these problems. The contributions of this dissertation are: (1) a non-IP, flat address automatic configuration scheme, which integrates lower layer addresses and P2P IDs in application layer and makes simple cryptographical assignment possible. A related paper entitled Pastry over Ad-Hoc Networks with Automatic Flat Address Configuration was submitted to Elsevier Journal of Ad Hoc Networks in May. (2) an effective ring topology construction algorithm which builds perfect ring in P2P ID space using only simplest multi-hop unicast or multicast. Upon this ring, popular structured P2P networks like Chord, Pastry could be built with great ease. A related paper entitled Chord Bootstrapping on MANETs - All Roads lead to Rome will be ready for submission after defense of the dissertation

CMI Computing: A Cloud, MANET, and Internet of Things Integration for Future Internet

The wireless communication is making it easier for smart devices to communicate with one another in terms of the network of the Internet of Things. Smart devices are automatically linked and built up a network on their own. But there are more obstacles to safe access within the network itself. Mobile devices such as smart home automation access point, smart washing machines, mobile boards, temperature sensors, color-changing smart lighting, smartphones, wearable devices, and smart appliances, etc. are widespread in our daily lives and is becoming valuable tools with wireless communication abilities that are using specific wireless standards that are commonly used with IEEE 802.11 access points. On the realism of the Internet, security has been perceived as a prominent inhibitor of embracing the cloud paradigm. It is resource storage and management that may lay in any since the cloud environment is a distributed architecture, which place of the world, many concerns have been raised over its vulnerabilities, security threats and challenges. The involvement of various parties has widened these concerns based on each party's perspective and objective. The Cloud point of view we mainly discuss the causes of obstacles and challenges related to security, reliability, privacy, and service availability. The wireless communication Security has been raised as one of the most critical issues of cloud computing where resolving such an issue would result in constant growth in the cloud’s use and popularity. Our purpose of this study is to create a framework of mobile ad hoc network mobility model using cloud computing for providing secure communication among smart devices network for the internet of things in 5G heterogeneous networks. Our main contribution links a new methodology for providing secure communication on the internet of smart devices in 5G. Our methodology uses the correct and efficient simulation of the desired study and can be implemented in a framework of the Internet of Things in 5G

Recent advances in industrial wireless sensor networks towards efficient management in IoT

With the accelerated development of Internet-of- Things (IoT), wireless sensor networks (WSN) are gaining importance in the continued advancement of information and communication technologies, and have been connected and integrated with Internet in vast industrial applications. However, given the fact that most wireless sensor devices are resource constrained and operate on batteries, the communication overhead and power consumption are therefore important issues for wireless sensor networks design. In order to efficiently manage these wireless sensor devices in a unified manner, the industrial authorities should be able to provide a network infrastructure supporting various WSN applications and services that facilitate the management of sensor-equipped real-world entities. This paper presents an overview of industrial ecosystem, technical architecture, industrial device management standards and our latest research activity in developing a WSN management system. The key approach to enable efficient and reliable management of WSN within such an infrastructure is a cross layer design of lightweight and cloud-based RESTful web service

Mobile ad hoc networks in transportation data collection and dissemination

The field of transportation is rapidly changing with new opportunities for systems solutions and emerging technologies. The global economic impact of congestion and accidents are significant. Improved means are needed to solve them. Combined with the increasing numbers of vehicles on the road, the net economic impact is measured in the many billions of dollars. Promising methodologies explored in this thesis include the use of the Internet of Things (IoT) and Mobile Ad Hoc Networks (MANET). Interconnecting vehicles using Dedicated Short Range Communication technology (DSRC) brings many benefits. Integrating DSRC into roadway vehicles offers the promise of reducing the problems of congestion and accidents; however, it comes with risks such as loss of connectivity due to power outages as well as controlling and managing loading in such networks. Energy consumption of vehicle communication equipment is a crucial factor in high availability sensor networks. Sending critical emergency messaged through linked vehicles requires that there always be energy and communication reserves. Two algorithms are described. The first controls energy consumption to guarantee an energy reserve for sending alert signals. The second exploits Long Term Evolution (LTE) to guarantee a reliable communication path