Analog layout design automation: ILP-based analog routers

The shrinking design window and high parasitic sensitivity in the advanced technology have imposed special challenges on the analog and radio frequency (RF) integrated circuit design. In this thesis, we propose a new methodology to address such a deficiency based on integer linear programming (ILP) but without compromising the capability of handling any special constraints for the analog routing problems. Distinct from the conventional methods, our algorithm utilizes adaptive resolutions for various routing regions. For a more congested region, a routing grid with higher resolution is employed, whereas a lower-resolution grid is adopted to a less crowded routing region. Moreover, we strengthen its speciality in handling interconnect width control so as to route the electrical nets based on analog constraints while considering proper interconnect width to address the acute interconnect parasitics, mismatch minimization, and electromigration effects simultaneously. In addition, to tackle the performance degradation due to layout dependent effects (LDEs) and take advantage of optical proximity correction (OPC) for resolution enhancement of subwavelength lithography, in this thesis we have also proposed an innovative LDE-aware analog layout migration scheme, which is equipped with our special routing methodology. The LDE constraints are first identified with aid of a special sensitivity analysis and then satisfied during the layout migration process. Afterwards the electrical nets are routed by an extended OPC-inclusive ILP-based analog router to improve the final layout image fidelity while the routability and analog constraints are respected in the meantime. The experimental results demonstrate the effectiveness and efficiency of our proposed methods in terms of both circuit performance and image quality compared to the previous works

Design tool and methodologies for interconnect reliability analysis in integrated circuits

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2004.This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.Includes bibliographical references (p. 195-204).by Syed Mohiul Alam.Ph.D

Design methodology and productivity improvement in high speed VLSI circuits

2017 Spring.Includes bibliographical references.To view the abstract, please see the full text of the document

The impact of design techniques in the reduction of power consumption of SoCs Multimedia

Orientador: Guido Costa Souza de AraújoDissertação (mestrado) - Universidade Estadual de Campinas, Instituto de ComputaçãoResumo: A indústria de semicondutores sempre enfrentou fortes demandas em resolver problema de dissipação de calor e reduzir o consumo de energia em dispositivos. Esta tendência tem sido intensificada nos últimos anos com o movimento de sustentabilidade ambiental. A concepção correta de um sistema eletrônico de baixo consumo de energia é um problema de vários níveis de complexidade e exige estratégias sistemáticas na sua construção. Fora disso, a adoção de qualquer técnica de redução de energia sempre está vinculada com objetivos especiais e provoca alguns impactos no projeto. Apesar dos projetistas conheçam bem os impactos de forma qualitativa, as detalhes quantitativas ainda são incógnitas ou apenas mantidas dentro do 'know-how' das empresas. Neste trabalho, de acordo com resultados experimentais baseado num plataforma de SoC1 industrial, tentamos quantificar os impactos derivados do uso de técnicas de redução de consumo de energia. Nos concentramos em relacionar o fator de redução de energia de cada técnica aos impactos em termo de área, desempenho, esforço de implementação e verificação. Na ausência desse tipo de dados, que relacionam o esforço de engenharia com as metas de consumo de energia, incertezas e atrasos serão frequentes no cronograma de projeto. Esperamos que este tipo de orientações possam ajudar/guiar os arquitetos de projeto em selecionar as técnicas adequadas para reduzir o consumo de energia dentro do alcance de orçamento e cronograma de projetoAbstract: The semiconductor industry has always faced strong demands to solve the problem of heat dissipation and reduce the power consumption in electronic devices. This trend has been increased in recent years with the action of environmental sustainability. The correct conception of an electronic system for low power consumption is an issue with multiple levels of complexities and requires systematic approaches in its construction. However, the adoption of any technique for reducing the power consumption is always linked with some specific goals and causes some impacts on the project. Although the designers know well that these impacts can affect the design in a quality aspect, the quantitative details are still unkown or just be kept inside the company's know-how. In this work, according to the experimental results based on an industrial SoC2 platform, we try to quantify the impacts of the use of low power techniques. We will relate the power reduction factor of each technique to the impact in terms of area, performance, implementation and verification effort. In the absence of such data, which relates the engineering effort to the goals of power consumption, uncertainties and delays are frequent. We hope that such guidelines can help/guide the project architects in selecting the appropriate techniques to reduce the power consumption within the limit of budget and project scheduleMestradoCiência da ComputaçãoMestre em Ciência da Computaçã

A Pre-Search Assisted ILP Approach to Analog Integrated Circuit Routing

The routing of analog integrated circuits (IC) has long been a challenge due to numerous constraints (such as symmetry and topology-matching) that matter for overall circuit performance. Existing automatic analog IC routing algorithms can be broadly categorized into two approaches: sequential approach that heuristically routes one net after another and constructive ILP (Integer Linear Programming). The former approach is usually fast but may miss opportunities of finding good solutions. The constructive ILP provides optimal solutions but can be very time consuming. We propose a simple yet efficient method that combines the advantages of both existing approaches. First, sequential routing is performed to obtain a set of candidate routing paths for each net. Then, an ILP is applied to commit each net to only one of its candidate routes. Experiments on two op-amp designs show that the post-layout performance (such as gain and phase margin) from our method is close to that of manual design. Our method also outperforms a previous work of automated analog IC routing

ポータビリティを意識したCMOSミックスドシグナルVLSI回路設計手法に関する研究

本研究は、半導体上に集積されたアナログ・ディジタル・メモリ回路から構成されるミクストシグナルシステムを別の製造プロセスへ移行することをポーティングとして定義し、効率的なポーティングを行うための設計方式と自動回路合成アルゴリズムを提案し、いくつかの典型的な回路に対する設計事例を示し、提案手法の妥当性を立証している。北九州市立大

Fast Repeater Tree Construction

Repeaters are used during physical design of chips to improve the electrical and timing properties of interconnections. They are added along Steiner trees that connect root gates to sinks, creating repeater trees. Their construction became a crucial part of chip design. We present a new algorithm to solve the repeater tree construction problem. We first present an extensive version of the Repeater Tree Problem. Our problem formulation encapsulates most of the constraints that have been studied so far. We also consider several aspects for the first time, for example, slew dependent required arrival times at repeater tree sinks. The employed technology, the properties of available repeaters and metal wires, the shape of the chip, the temperature, the voltages, and many other factors highly influence the results of repeater tree construction. To take all this into account, we extensively preprocess the environment to extract parameters for our algorithms. We first present an algorithm for Steiner tree creation and prove that our algorithm is able to create timing-efficient as well as cost-efficient trees. Our algorithm is based on a delay model that accurately describes the timing that one can achieve after repeater insertion upfront. Next, we deal with the problem of adding repeaters to a given Steiner tree. The predominantly used algorithms to solve this problem use dynamic programming. However, they have several drawbacks. Firstly, potential repeater positions along the Steiner tree have to be chosen upfront. Secondly, the algorithms strictly follow the given Steiner tree and miss optimization opportunities. Finally, dynamic programming causes high running times. We present our new buffer insertion algorithm, Fast Buffering, that overcomes these limitations. It is able to produce results with similar quality to a dynamic programming approach but a much better running time. In addition, we also present improvements to the dynamic programming approach that allows us to push the quality at the expense of a high running time. We have implemented our algorithms as part of the BonnTools physical design optimization suite developed at the Research Institute for Discrete Mathematics in cooperation with IBM. Our implementation deals with all tedious details of a grown real-world chip optimization environment. We have created extensive experimental results on challenging real-world test cases provided by our cooperation partner. Our algorithm can solve about 5.7 million instances per hour

Multi-Threshold Low Power-Delay Product Memory and Datapath Components Utilizing Advanced FinFET Technology Emphasizing the Reliability and Robustness

Indiana University-Purdue University Indianapolis (IUPUI)In this thesis, we investigated the 7 nm FinFET technology for its delay-power product performance. In our study, we explored the ASAP7 library from Arizona State University, developed in collaboration with ARM Holdings. The FinFET technology was chosen since it has a subthreshold slope of 60mV/decade that enables cells to function at 0.7V supply voltage at the nominal corner. An emphasis was focused on characterizing the Non-Ideal effects, delay variation, and power for the FinFET device. An exhaustive analysis of the INVx1 delay variation for different operating conditions was also included, to assess the robustness. The 7nm FinFET device was then employed into 6T SRAM cells and 16 function ALU. The SRAM cells were approached with advanced multi-corner stability evaluation. The system-level architecture of the ALU has demonstrated an ultra-low power system operating at 1 GHz clock frequency