Adaptive Multiclient Network-on-Chip Memory Core: Hardware Architecture, Software Abstraction Layer, and Application Exploration

This paper presents the hardware architecture and the software abstraction layer of an adaptive multiclient Network-on-Chip (NoC) memory core. The memory core supports the flexibility of a heterogeneous FPGA-based runtime adaptive multiprocessor system called RAMPSoC. The processing elements, also called clients, can access the memory core via the Network-on-Chip (NoC). The memory core supports a dynamic mapping of an address space for the different clients as well as different data transfer modes, such as variable burst sizes. Therefore, two main limitations of FPGA-based multiprocessor systems, the restricted on-chip memory resources and that usually only one physical channel to an off-chip memory exists, are leveraged. Furthermore, a software abstraction layer is introduced, which hides the complexity of the memory core architecture and which provides an easy to use interface for the application programmer. Finally, the advantages of the novel memory core in terms of performance, flexibility, and user friendliness are shown using a real-world image processing application

Adaptive Multiclient Network-on-Chip Memory Core : Hardware Architecture, Software Abstraction Layer, and Application Exploration

This paper presents the hardware architecture and the software abstraction layer of an adaptive multiclient Network-on-Chip (NoC) memory core. The memory core supports the flexibility of a heterogeneous FPGA-based runtime adaptive multiprocessor system called RAMPSoC. The processing elements, also called clients, can access the memory core via the Network-on-Chip (NoC). The memory core supports a dynamic mapping of an address space for the different clients as well as different data transfer modes, such as variable burst sizes. Therefore, two main limitations of FPGA-based multiprocessor systems, the restricted on-chip memory resources and that usually only one physical channel to an off-chip memory exists, are leveraged. Furthermore, a software abstraction layer is introduced, which hides the complexity of the memory core architecture and which provides an easy to use interface for the application programmer. Finally, the advantages of the novel memory core in terms of performance, flexibility, and user friendliness are shown using a real-world image processing application

Vector support for multicore processors with major emphasis on configurable multiprocessors

It recently became increasingly difficult to build higher speed uniprocessor chips because of performance degradation and high power consumption. The quadratically increasing circuit complexity forbade the exploration of more instruction-level parallelism (JLP). To continue raising the performance, processor designers then focused on thread-level parallelism (TLP) to realize a new architecture design paradigm. Multicore processor design is the result of this trend. It has proven quite capable in performance increase and provides new opportunities in power management and system scalability. But current multicore processors do not provide powerful vector architecture support which could yield significant speedups for array operations while maintaining arealpower efficiency. This dissertation proposes and presents the realization of an FPGA-based prototype of a multicore architecture with a shared vector unit (MCwSV). FPGA stands for Filed-Programmable Gate Array. The idea is that rather than improving only scalar or TLP performance, some hardware budget could be used to realize a vector unit to greatly speedup applications abundant in data-level parallelism (DLP). To be realistic, limited by the parallelism in the application itself and by the compiler\u27s vectorizing abilities, most of the general-purpose programs can only be partially vectorized. Thus, for efficient resource usage, one vector unit should be shared by several scalar processors. This approach could also keep the overall budget within acceptable limits. We suggest that this type of vector-unit sharing be established in future multicore chips. The design, implementation and evaluation of an MCwSV system with two scalar processors and a shared vector unit are presented for FPGA prototyping. The MicroBlaze processor, which is a commercial IP (Intellectual Property) core from Xilinx, is used as the scalar processor; in the experiments the vector unit is connected to a pair of MicroBlaze processors through standard bus interfaces. The overall system is organized in a decoupled and multi-banked structure. This organization provides substantial system scalability and better vector performance. For a given area budget, benchmarks from several areas show that the MCwSV system can provide significant performance increase as compared to a multicore system without a vector unit. However, a MCwSV system with two MicroBlazes and a shared vector unit is not always an optimized system configuration for various applications with different percentages of vectorization. On the other hand, the MCwSV framework was designed for easy scalability to potentially incorporate various numbers of scalar/vector units and various function units. Also, the flexibility inherent to FPGAs can aid the task of matching target applications. These benefits can be taken into account to create optimized MCwSV systems for various applications. So the work eventually focused on building an architecture design framework incorporating performance and resource management for application-specific MCwSV (AS-MCwSV) systems. For embedded system design, resource usage, power consumption and execution latency are three metrics to be used in design tradeoffs. The product of these metrics is used here to choose the MCwSV system with the smallest value

Design and analysis of multiple read port techniques using bank division with XOR method for multi-ported-memory on FPGA platform

The multiple read and write operations are performed simultaneously by multi-ported memories and are used in advanced digital design applications on reprogrammable field-programmable gate arrays (FPGAs) to achieve higher bandwidth. The Memory modules are configured by block RAM (BRAMs), which utilizes more area and power on FPGA. In this manuscript, the techniques to increase the read ports for multi-ported memory modules are designed using the bank division with XOR (BDX) approach. The read port techniques like two read-one write (2R1W) memory, hybrid mode approach either 2R1W or 4R memory, and hierarchical BDX (HBDX) Approach using 2R1W/4R memory are designed on FPGA platform. The Proposed work utilizes only slices and look-up table (LUT's) rather than BRAMs while designing the memory modules on FPGA, which reduces the computational complexity and improves the system performance.  The experimental results are analyzed on Artix-7 FPGA. The performance parameters like slices, LUT utilization, maximum frequency (Fmax), and hardware efficiency are analyzed by concerning different memory depths. The 4R1W memory design using the HBDX approach utilizes 4% slices and works at 449.697 MHz operating frequency on Artix-7 FPGA. The proposed work provides a better platform to choose the proper read port technique to design an efficient modular multiport memory architecture

Development of Multiport Single Stage Bidirectional Converter for Photovoltaic and Energy Storage Integration

The energy market is on the verge of a paradigm shift as the emergence of renewable energy sources over traditional fossil fuel based energy supply has started to become cost competitive and viable. Unfortunately, most of the attractive renewable sources come with inherent challenges such as: intermittency and unreliability. This is problematic for today\u27s stable, day ahead market based power system. Fortunately, it is well established that energy storage devices can compensate for renewable sources shortcomings. This makes the integration of energy storage with the renewable energy sources, one of the biggest challenges of modern distributed generation solution. This work discusses, the current state of the art of power conversion systems that integrate photovoltaic and battery energy storage systems. It is established that the control of bidirectional power flow to the energy storage device can be improved by optimizing its modulation and control. Traditional multistage conversion systems offers the required power delivery options, but suffers from a rigid power management system, reduced efficiency and increased cost. To solve this problem, a novel three port converter was developed which allows bidirectional power flow between the battery and the load, and unidirectional power flow from the photovoltaic port. The individual two-port portions of the three port converter were optimized in terms of modulation scheme. This leads to optimization of the proposed converter, for all possible power flow modes. In the second stage of the project, the three port converter was improved both in terms of cost and efficiency by proposing an improved topology. The improved three port converter has reduced functionality but is a perfect fit for the targeted microinverter application. The overall control system was designed to achieve improved reference tracking for power management and output AC voltage control. The bidirectional converter and both the proposed three port converters were analyzed theoretically. Finally, experimental prototypes were built to verify their performance

Investigation of a Novel Common Subexpression Elimination Method for Low Power and Area Efficient DCT Architecture

A wide interest has been observed to find a low power and area efficient hardware design of discrete cosine transform (DCT) algorithm. This research work proposed a novel Common Subexpression Elimination (CSE) based pipelined architecture for DCT, aimed at reproducing the cost metrics of power and area while maintaining high speed and accuracy in DCT applications. The proposed design combines the techniques of Canonical Signed Digit (CSD) representation and CSE to implement the multiplier-less method for fixed constant multiplication of DCT coefficients. Furthermore, symmetry in the DCT coefficient matrix is used with CSE to further decrease the number of arithmetic operations. This architecture needs a single-port memory to feed the inputs instead of multiport memory, which leads to reduction of the hardware cost and area. From the analysis of experimental results and performance comparisons, it is observed that the proposed scheme uses minimum logic utilizing mere 340 slices and 22 adders. Moreover, this design meets the real time constraints of different video/image coders and peak-signal-to-noise-ratio (PSNR) requirements. Furthermore, the proposed technique has significant advantages over recent well-known methods along with accuracy in terms of power reduction, silicon area usage, and maximum operating frequency by 41%, 15%, and 15%, respectively

Integrated transmitter circuit for multiport reconfigurable antenna

This master’s thesis was a part of an academic research projecta where the target is to design an integrated circuit (IC) to dynamically tune the operating frequency of a transmitter antenna. A multiport antenna model was provided by Prof. Viikari’s group who recently presented a novel idea of multiport antenna tuning. In this concept the multiport antenna feeds are excited with weighted signals having certain amplitudes and phases, thus leading to antenna tuning at the desired operating frequency. However, it is not feasible to dynamically scale the antenna feeding signal amplitudes and phases with discrete electronics. Therefore, the system on chip solution (SoC) approach was studied in this thesis. Initially, the concept was studied on theoretical level and with circuit simulations. The tuning analysis framework was developed to scrutinize the antenna weighted signal characteristics. This analysis provides the two most important specifications for the IC i.e., the accuracy required for on-chip amplitude and phase tuning. For the antenna under consideration, the on chip phase and amplitude tuning system have 6 bit and 3 bit scaling resolutions respectively. The tuning system is designed for a 4-port reconfigurable antenna where each antenna feed has a separate phase tuning and amplitude tuning block. The tuning system was simulated along the 4-port antenna at 2 GHz, and the simulation result validates the multiport tuning concept. This novel integrated tuning system is scalable as well as capable of tuning any reconfigurable multiport antenna

A Dynamically Reconfigurable Parallel Processing Framework with Application to High-Performance Video Processing

Digital video processing demands have and will continue to grow at unprecedented rates. Growth comes from ever increasing volume of data, demand for higher resolution, higher frame rates, and the need for high capacity communications. Moreover, economic realities force continued reductions in size, weight and power requirements. The ever-changing needs and complexities associated with effective video processing systems leads to the consideration of dynamically reconfigurable systems. The goal of this dissertation research was to develop and demonstrate the viability of integrated parallel processing system that effectively and efficiently apply pre-optimized hardware cores for processing video streamed data. Digital video is decomposed into packets which are then distributed over a group of parallel video processing cores. Real time processing requires an effective task scheduler that distributes video packets efficiently to any of the reconfigurable distributed processing nodes across the framework, with the nodes running on FPGA reconfigurable logic in an inherently Virtual\u27 mode. The developed framework, coupled with the use of hardware techniques for dynamic processing optimization achieves an optimal cost/power/performance realization for video processing applications. The system is evaluated by testing processor utilization relative to I/O bandwidth and algorithm latency using a separable 2-D FIR filtering system, and a dynamic pixel processor. For these applications, the system can achieve performance of hundreds of 640x480 video frames per second across an eight lane Gen I PCIe bus. Overall, optimal performance is achieved in the sense that video data is processed at the maximum possible rate that can be streamed through the processing cores. This performance, coupled with inherent ability to dynamically add new algorithms to the described dynamically reconfigurable distributed processing framework, creates new opportunities for realizable and economic hardware virtualization.\u2

A pipelined configurable gate array for embedded processors

In recent years the challenge of high performance, low power retargettable embedded system has been faced with different technological and architectural solutions. In this paper we present a new configurable unit explicitly designed to imple-ment additional reconfigurable pipelined datapaths, suitable for the design of reconfigurable processors. A VLIW recon-figurable processor has been implemented on silicon in a standard 0.18 µm CMOS technology to prove the effective-ness of the proposed unit. Testing on a signal processing algorithms benchmark showed speedups from 4.3x to 13.5x and energy consumption reduction up to 92%