The application of remote sensing in open moorland soil erosion studies: a case study of Glaisdale moor, northern England

The potential of remote sensing in upland soil erosion studies has been examined on Glaisdale Moor, North Yorkshire Moors. The study considers four different remote sensing sources, viz. sequential air photographs, ground radiometry, Landsat Thematic Mapper (TM) and SPOT simulation. Sequential air photographs have been interpreted in order to elucidate the land use/land cover changes and the drainage development and associated erosion problems in the region. A series of statistical analyses were employed in an effort to establish the relationships between the different spectral variables and the soil/ground variables. Attempts have also been made to evaluate the spectral separability performance of the Ground radiometer, the Landsat TM and the SPOT simulation wave bands. The Landsat TM and the SPOT simulation imagery have been further analysed in order to gather information about the best band and band combinations that would be required to optimize the discrimination of moorland surface types including eroded areas. Digital image processing of the Landsat TM and the SPOT simulation subscene for Glaisdale Moor was performed using the DIAD image processing system. The land use/land cover classification information derived from the air photographs, the Landsat TM and the SPOT simulation, has been used as an input into a soil loss prediction model (USLE) to predict the soil erosion rate of the study area. Of the various remote sensing systems used, air photographs and TM data proved the most useful in this area

A geological investigation of multispectral remote sensing data for the Mahd Adh Dhahab and Jabal said districts, western Saudi Arabia

This thesis examines the effect of spatial resolution on lithological and alteration mapping using remotely sensed multispectral data. The remotely sensed data were obtained by the Thematic Mapper (TM) and Airborne Thematic Mapper (ATM) over two areas in the Arabian Shield. These were the Mahd Adh Dhahab and Jabal Said areas. The ATM data had a nominal spatial resolution of 7.5m, 5m, and 2.5m. In order to compare these data sets it was necessary to correct for, sensor- and scene-related distortions. This was achieved by calibrating each data set and converting them to reflectance units using ground spectra with a similar spectral resolution obtained with the Barringer Hand Held Ratioing Radiometer (HHRR) . The ATM data were also corrected for X-track shading by normalising the brightness of each column to that of the centre column. The result of X-ray and laboratory spectral analysis of samples collected from the study areas, support the presence of characteristic minerals associated with the alteration zones. The corrected data were analysed by a variety of techniques in order to enhance the geological information present in the data. These included false colour compositing, decorrelating stretching and band ratioing. The latter two techniques proved most effective for discrimination and several additional geological units and areas were identified which had not been mapped previously. Results further indicate that the increased spatial resolution of the ATM data did not permit greater discrimination than the TM data. This suggests TM data should prove to be a cost-effective way of mapping and detection of alteration zones in the Arabian Shield

The potential for using remote sensing to quantify stress in and predict yield of sugarcane (Saccharum spp. hybrid)

Thesis (Ph.D.)-University of KwaZulu-Natal, Pietermaritzburg, 2010

Complex land cover classifications and physical properties retrieval of tropical forests using multi-source remote sensing

The work presented in this thesis mainly focuses on two subjects related to the application of remote sensing data: (1) for land cover classification combining optical sensor, texture features generated from spectral information and synthetic aperture radar (SAR) features, and (2) to develop a non-destructive approach for above ground biomass (AGB) and forest attributes estimation employing multi-source remote sensing data (i.e. optical data, SAR backscatter) combined with in-situ data. Information provided by reliable land cover map is useful for management of forest resources to support sustainable forest management, whereas the generation of the non-destructive approach to model forest biophysical properties (e.g. AGB and stem volume) is required to assess the forest resources more efficiently and cost-effective, and coupled with remote sensing data the model can be applied over large forest areas. This work considers study sites over tropical rain forest landscape in Indonesia characterized by different successional stages and complex vegetation structure including tropical peatland forests. The thesis begins with a brief introduction and the state of the art explaining recent trends on monitoring and modeling of forest resources using remote sensing data and approach. The research works on the integration of spectral information and texture features for forest cover mapping is presented subsequently, followed by development of a non-destructive approach for AGB and forest parameters predictions and modeling. Ultimately, this work evaluates the potential of mosaic SAR data for AGB modeling and the fusion of optical and SAR data for peatlands discrimination. The results show that the inclusion of geostatistics texture features improved the classification accuracy of optical Landsat ETM data. Moreover, the fusion of SAR and optical data enhanced the peatlands discrimination over tropical peat swamp forest. For forest stand parameters modeling, neural networks method resulted in lower error estimate than standard multi-linear regression technique, and the combination of non-destructive measurement (i.e. stem number) and remote sensing data improved the model accuracy. The up scaling of stem volume and biomass estimates using Kriging method and bi-temporal ETM image also provide favorable estimate results upon comparison with the land cover map.Die in dieser Dissertation präsentierten Ergebnisse konzentrieren sich hauptsächlich auf zwei Themen mit Bezug zur angewandten Fernerkundung: 1) Der Klassifizierung von Oberflächenbedeckung basierend auf der Verknüpfung von optischen Sensoren, Textureigenschaften erzeugt durch Spektraldaten und Synthetic-Aperture-Radar (SAR) features und 2) die Entwicklung eines nichtdestruktiven Verfahrens zur Bestimmung oberirdischer Biomasse (AGB) und weiterer Waldeigenschaften mittels multi-source Fernerkundungsdaten (optische Daten, SAR Rückstreuung) sowie in-situ Daten. Eine zuverlässige Karte der Landbedeckung dient der Unterstützung von nachhaltigem Waldmanagement, während eine nichtdestruktive Herangehensweise zur Modellierung von biophysikalischen Waldeigenschaften (z.B. AGB und Stammvolumen) für eine effiziente und kostengünstige Beurteilung der Waldressourcen notwendig ist. Durch die Kopplung mit Fernerkundungsdaten kann das Modell auf große Waldflächen übertragen werden. Die vorliegende Arbeit berücksichtigt Untersuchungsgebiete im tropischen Regenwald Indonesiens, welche durch verschiedene Regenerations- und Sukzessionsstadien sowie komplexe Vegetationsstrukturen, inklusive tropischer Torfwälder, gekennzeichnet sind. Am Anfang der Arbeit werden in einer kurzen Einleitung der Stand der Forschung und die neuesten Forschungstrends in der Überwachung und Modellierung von Waldressourcen mithilfe von Fernerkundungsdaten dargestellt. Anschließend werden die Forschungsergebnisse der Kombination von Spektraleigenschaften und Textureigenschaften zur Waldbedeckungskartierung erläutert. Desweiteren folgen Ergebnisse zur Entwicklung eines nichtdestruktiven Ansatzes zur Vorhersage und Modellierung von AGB und Waldeigenschaften, zur Auswertung von Mosaik- SAR Daten für die Modellierung von AGB, sowie zur Fusion optischer mit SAR Daten für die Identifizierung von Torfwäldern. Die Ergebnisse zeigen, dass die Einbeziehung von geostatistischen Textureigenschaften die Genauigkeit der Klassifikation von optischen Landsat ETM Daten gesteigert hat. Desweiteren führte die Fusion von SAR und optischen Daten zu einer Verbesserung der Unterscheidung zwischen Torfwäldern und tropischen Sumpfwäldern. Bei der Modellierung der Waldparameter führte die Neural-Network-Methode zu niedrigeren Fehlerschätzungen als die multiple Regressions. Die Kombination von nichtdestruktiven Messungen (z.B. Stammzahl) und Fernerkundungsdaten führte zu einer Steigerung der Modellgenauigkeit. Die Hochskalierung des Stammvolumens und Schätzungen der Biomasse mithilfe von Kriging und bi-temporalen ETM Daten lieferten positive Schätzergebnisse im Vergleich zur Landbedeckungskarte

Chapter Machine Learning in Volcanology: A Review

A volcano is a complex system, and the characterization of its state at any given time is not an easy task. Monitoring data can be used to estimate the probability of an unrest and/or an eruption episode. These can include seismic, magnetic, electromagnetic, deformation, infrasonic, thermal, geochemical data or, in an ideal situation, a combination of them. Merging data of different origins is a non-trivial task, and often even extracting few relevant and information-rich parameters from a homogeneous time series is already challenging. The key to the characterization of volcanic regimes is in fact a process of data reduction that should produce a relatively small vector of features. The next step is the interpretation of the resulting features, through the recognition of similar vectors and for example, their association to a given state of the volcano. This can lead in turn to highlight possible precursors of unrests and eruptions. This final step can benefit from the application of machine learning techniques, that are able to process big data in an efficient way. Other applications of machine learning in volcanology include the analysis and classification of geological, geochemical and petrological “static” data to infer for example, the possible source and mechanism of observed deposits, the analysis of satellite imagery to quickly classify vast regions difficult to investigate on the ground or, again, to detect changes that could indicate an unrest. Moreover, the use of machine learning is gaining importance in other areas of volcanology, not only for monitoring purposes but for differentiating particular geochemical patterns, stratigraphic issues, differentiating morphological patterns of volcanic edifices, or to assess spatial distribution of volcanoes. Machine learning is helpful in the discrimination of magmatic complexes, in distinguishing tectonic settings of volcanic rocks, in the evaluation of correlations of volcanic units, being particularly helpful in tephrochronology, etc. In this chapter we will review the relevant methods and results published in the last decades using machine learning in volcanology, both with respect to the choice of the optimal feature vectors and to their subsequent classification, taking into account both the unsupervised and the supervised approaches

Evaluation of ERTS multispectral signatures in relation to ground control signatures using a nested-sampling approach

The author has identified the following significant results. Ground measured spectral signatures of wavelength bands matching ERTS MSS were collected using a radiometer at several Californian and Nevadan sites, and directly compared with similar data from ERTS CCTs. The comparison was tested at the highest possible spatial resolution for ERTS, using deconvoluted MSS data, and contrasted with that of ground measured spectra, originally from 1 meter squares. In the mobile traverses of the grassland sites, these one meter fields of view were integrated into eighty meter transects along the five km track across four major rock/soil types. Suitable software was developed to read the MSS CCT tapes, to shadeprint individual bands with user-determined greyscale stretching. Four new algorithms for unsupervised and supervised, normalized and unnormalized clustering were developed, into a program termed STANSORT. Parallel software allowed the field data to be calibrated, and by using concurrently continuously collected, upward- and downward-viewing, 4 band radiometers, bidirectional reflectances could be calculated

Advances in Hyperspectral Image Classification Methods for Vegetation and Agricultural Cropland Studies

Hyperspectral data are becoming more widely available via sensors on airborne and unmanned aerial vehicle (UAV) platforms, as well as proximal platforms. While space-based hyperspectral data continue to be limited in availability, multiple spaceborne Earth-observing missions on traditional platforms are scheduled for launch, and companies are experimenting with small satellites for constellations to observe the Earth, as well as for planetary missions. Land cover mapping via classification is one of the most important applications of hyperspectral remote sensing and will increase in significance as time series of imagery are more readily available. However, while the narrow bands of hyperspectral data provide new opportunities for chemistry-based modeling and mapping, challenges remain. Hyperspectral data are high dimensional, and many bands are highly correlated or irrelevant for a given classification problem. For supervised classification methods, the quantity of training data is typically limited relative to the dimension of the input space. The resulting Hughes phenomenon, often referred to as the curse of dimensionality, increases potential for unstable parameter estimates, overfitting, and poor generalization of classifiers. This is particularly problematic for parametric approaches such as Gaussian maximum likelihoodbased classifiers that have been the backbone of pixel-based multispectral classification methods. This issue has motivated investigation of alternatives, including regularization of the class covariance matrices, ensembles of weak classifiers, development of feature selection and extraction methods, adoption of nonparametric classifiers, and exploration of methods to exploit unlabeled samples via semi-supervised and active learning. Data sets are also quite large, motivating computationally efficient algorithms and implementations. This chapter provides an overview of the recent advances in classification methods for mapping vegetation using hyperspectral data. Three data sets that are used in the hyperspectral classification literature (e.g., Botswana Hyperion satellite data and AVIRIS airborne data over both Kennedy Space Center and Indian Pines) are described in Section 3.2 and used to illustrate methods described in the chapter. An additional high-resolution hyperspectral data set acquired by a SpecTIR sensor on an airborne platform over the Indian Pines area is included to exemplify the use of new deep learning approaches, and a multiplatform example of airborne hyperspectral data is provided to demonstrate transfer learning in hyperspectral image classification. Classical approaches for supervised and unsupervised feature selection and extraction are reviewed in Section 3.3. In particular, nonlinearities exhibited in hyperspectral imagery have motivated development of nonlinear feature extraction methods in manifold learning, which are outlined in Section 3.3.1.4. Spatial context is also important in classification of both natural vegetation with complex textural patterns and large agricultural fields with significant local variability within fields. Approaches to exploit spatial features at both the pixel level (e.g., co-occurrencebased texture and extended morphological attribute profiles [EMAPs]) and integration of segmentation approaches (e.g., HSeg) are discussed in this context in Section 3.3.2. Recently, classification methods that leverage nonparametric methods originating in the machine learning community have grown in popularity. An overview of both widely used and newly emerging approaches, including support vector machines (SVMs), Gaussian mixture models, and deep learning based on convolutional neural networks is provided in Section 3.4. Strategies to exploit unlabeled samples, including active learning and metric learning, which combine feature extraction and augmentation of the pool of training samples in an active learning framework, are outlined in Section 3.5. Integration of image segmentation with classification to accommodate spatial coherence typically observed in vegetation is also explored, including as an integrated active learning system. Exploitation of multisensor strategies for augmenting the pool of training samples is investigated via a transfer learning framework in Section 3.5.1.2. Finally, we look to the future, considering opportunities soon to be provided by new paradigms, as hyperspectral sensing is becoming common at multiple scales from ground-based and airborne autonomous vehicles to manned aircraft and space-based platforms

Mapping natural habitats using remote sensing and Sparse partial least square discriminant analysis

This work presents a novel approach for mapping the spatial distribution of natural habitats in the "Foothills of Larzac" Natura 2000 listed site located in a French Mediterranean Biogeographical Region. Sparse Partial Least Square Discriminant Analysis was used to analyze two RapidEye datasets (June 2009 and July 2010) with the purpose of choosing the most informative spectral, textural and thematic variables that allow discriminating the classes of habitats. The Sparse Partial Least Square Discriminant Analysis selected relevant and stable variables for the discrimination of habitat classes that could be linked to ecological or biophysical characteristics. It also gave insight into the similarities and the differences between habitats classes with comparable physiognomic characteristics. The highest user accuracy was obtained for dry improved grasslands (u=91.97%) followed by riparian ash woods (u= 88.38%). These results are very encouraging given that these two classes were identified in Annex 1 of the EC Habitats Directive as of community interest. Due to limited data input requirements and to its computational efficiency, the approach developed in this paper is a good alternative to other types of variable selection approaches in a supervised classification framework and can be easily transferred to other Natura 2000 sites