A Complementary Resistive Switch-based Crossbar Array Adder

Redox-based resistive switching devices (ReRAM) are an emerging class of non-volatile storage elements suited for nanoscale memory applications. In terms of logic operations, ReRAM devices were suggested to be used as programmable interconnects, large-scale look-up tables or for sequential logic operations. However, without additional selector devices these approaches are not suited for use in large scale nanocrossbar memory arrays, which is the preferred architecture for ReRAM devices due to the minimum area consumption. To overcome this issue for the sequential logic approach, we recently introduced a novel concept, which is suited for passive crossbar arrays using complementary resistive switches (CRSs). CRS cells offer two high resistive storage states, and thus, parasitic sneak currents are efficiently avoided. However, until now the CRS-based logic-in-memory approach was only shown to be able to perform basic Boolean logic operations using a single CRS cell. In this paper, we introduce two multi-bit adder schemes using the CRS-based logic-in-memory approach. We proof the concepts by means of SPICE simulations using a dynamical memristive device model of a ReRAM cell. Finally, we show the advantages of our novel adder concept in terms of step count and number of devices in comparison to a recently published adder approach, which applies the conventional ReRAM-based sequential logic concept introduced by Borghetti et al.Comment: 12 pages, accepted for IEEE Journal on Emerging and Selected Topics in Circuits and Systems (JETCAS), issue on Computing in Emerging Technologie

Ionic logic with highly asymmetric nanofluidic memristive switches

While most neuromorphic systems are based on nanoscale electronic devices, nature relies on ions for energy-efficient information processing. Therefore, finding memristive nanofluidic devices is a milestone toward realizing electrolytic computers mimicking the brain down to its basic principles of operations. Here, we present a nanofluidic device designed for circuit scale in-memory processing that combines single-digit nanometric confinement and large entrance asymmetry. Our fabrication process is scalable while the device operates at the second timescale with a twenty-fold conductance ratio. It displays a switching threshold due to the dynamics of an extended space charge. The combination of these features permits assembling logic circuits composed of two interactive nanofluidic devices and an ohmic resistor. These results open the way to design multi-component ionic machinery, such as nanofluidic neural networks, and implementing brain-inspired ionic computations

Memristive Computing

Memristive computing refers to the utilization of the memristor, the fourth fundamental passive circuit element, in computational tasks. The existence of the memristor was theoretically predicted in 1971 by Leon O. Chua, but experimentally validated only in 2008 by HP Labs. A memristor is essentially a nonvolatile nanoscale programmable resistor — indeed, memory resistor — whose resistance, or memristance to be precise, is changed by applying a voltage across, or current through, the device. Memristive computing is a new area of research, and many of its fundamental questions still remain open. For example, it is yet unclear which applications would benefit the most from the inherent nonlinear dynamics of memristors. In any case, these dynamics should be exploited to allow memristors to perform computation in a natural way instead of attempting to emulate existing technologies such as CMOS logic. Examples of such methods of computation presented in this thesis are memristive stateful logic operations, memristive multiplication based on the translinear principle, and the exploitation of nonlinear dynamics to construct chaotic memristive circuits. This thesis considers memristive computing at various levels of abstraction. The first part of the thesis analyses the physical properties and the current-voltage behaviour of a single device. The middle part presents memristor programming methods, and describes microcircuits for logic and analog operations. The final chapters discuss memristive computing in largescale applications. In particular, cellular neural networks, and associative memory architectures are proposed as applications that significantly benefit from memristive implementation. The work presents several new results on memristor modeling and programming, memristive logic, analog arithmetic operations on memristors, and applications of memristors. The main conclusion of this thesis is that memristive computing will be advantageous in large-scale, highly parallel mixed-mode processing architectures. This can be justified by the following two arguments. First, since processing can be performed directly within memristive memory architectures, the required circuitry, processing time, and possibly also power consumption can be reduced compared to a conventional CMOS implementation. Second, intrachip communication can be naturally implemented by a memristive crossbar structure.Siirretty Doriast

Low-power emerging memristive designs towards secure hardware systems for applications in internet of things

Emerging memristive devices offer enormous advantages for applications such as non-volatile memories and in-memory computing (IMC), but there is a rising interest in using memristive technologies for security applications in the era of internet of things (IoT). In this review article, for achieving secure hardware systems in IoT, low-power design techniques based on emerging memristive technology for hardware security primitives/systems are presented. By reviewing the state-of-the-art in three highlighted memristive application areas, i.e. memristive non-volatile memory, memristive reconfigurable logic computing and memristive artificial intelligent computing, their application-level impacts on the novel implementations of secret key generation, crypto functions and machine learning attacks are explored, respectively. For the low-power security applications in IoT, it is essential to understand how to best realize cryptographic circuitry using memristive circuitries, and to assess the implications of memristive crypto implementations on security and to develop novel computing paradigms that will enhance their security. This review article aims to help researchers to explore security solutions, to analyze new possible threats and to develop corresponding protections for the secure hardware systems based on low-cost memristive circuit designs

Low Power Memory/Memristor Devices and Systems

This reprint focusses on achieving low-power computation using memristive devices. The topic was designed as a convenient reference point: it contains a mix of techniques starting from the fundamental manufacturing of memristive devices all the way to applications such as physically unclonable functions, and also covers perspectives on, e.g., in-memory computing, which is inextricably linked with emerging memory devices such as memristors. Finally, the reprint contains a few articles representing how other communities (from typical CMOS design to photonics) are fighting on their own fronts in the quest towards low-power computation, as a comparison with the memristor literature. We hope that readers will enjoy discovering the articles within

Multifunctional Optoelectronic Device Based on Resistive Switching Effects

Optoelectronic resistive switching devices, utilizing optical and electrical hybrid methods to control the resistance states, offer several advantages of both photons and electrons for high-performance information detecting, demodulating, processing, and memorizing. In the past decades, optoelectronic resistive switching devices have been widely discussed and studied due to the potential for parallel information transmission and processing. In this chapter, recent progresses on the optoelectronic resistive switching mechanism, materials, and devices will be introduced. Then, their performance such as photoresponsivity, on/off ratio, as well as retention will be investigated. Furthermore, possible applications of the optoelectronic resistive switching considering logic, memory, neuromorphic, and image-processing devices will be summarized. In the end, the challenges and possible solutions of optoelectronic resistive switching devices for the next-generation information technology will be discussed and prospected

New Approaches for Memristive Logic Computations

Over the past five decades, exponential advances in device integration in microelectronics for memory and computation applications have been observed. These advances are closely related to miniaturization in integrated circuit technologies. However, this miniaturization is reaching the physical limit (i.e., the end of Moore\u27s Law). This miniaturization is also causing a dramatic problem of heat dissipation in integrated circuits. Additionally, approaching the physical limit of semiconductor devices in fabrication process increases the delay of moving data between computing and memory units hence decreasing the performance. The market requirements for faster computers with lower power consumption can be addressed by new emerging technologies such as memristors. Memristors are non-volatile and nanoscale devices and can be used for building memory arrays with very high density (extending Moore\u27s law). Memristors can also be used to perform stateful logic operations where the same devices are used for logic and memory, enabling in-memory logic. In other words, memristor-based stateful logic enables a new computing paradigm of combining calculation and memory units (versus von Neumann architecture of separating calculation and memory units). This reduces the delays between processor and memory by eliminating redundant reloading of reusable values. In addition, memristors consume low power hence can decrease the large amounts of power dissipation in silicon chips hitting their size limit. The primary focus of this research is to develop the circuit implementations for logic computations based on memristors. These implementations significantly improve the performance and decrease the power of digital circuits. This dissertation demonstrates in-memory computing using novel memristive logic gates, which we call volistors (voltage-resistor gates). Volistors capitalize on rectifying memristors, i.e., a type of memristors with diode-like behavior, and use voltage at input and resistance at output. In addition, programmable diode gates, i.e., another type of logic gates implemented with rectifying memristors are proposed. In programmable diode gates, memristors are used only as switches (unlike volistor gates which utilize both memory and switching characteristics of the memristors). The programmable diode gates can be used with CMOS gates to increase the logic density. As an example, a circuit implementation for calculating logic functions in generalized ESOP (Exclusive-OR-Sum-of-Products) form and multilevel XOR network are described. As opposed to the stateful logic gates, a combination of both proposed logic styles decreases the power and improves the performance of digital circuits realizing two-level logic functions Sum-of-Products or Product-of-Sums. This dissertation also proposes a general 3-dimentional circuit architecture for in-memory computing. This circuit consists of a number of stacked crossbar arrays which all can simultaneously be used for logic computing. These arrays communicate through CMOS peripheral circuits

Potential and Challenges of Analog Reconfigurable Computation in Modern and Future CMOS

In this work, the feasibility of the floating-gate technology in analog computing platforms in a scaled down general-purpose CMOS technology is considered. When the technology is scaled down the performance of analog circuits tends to get worse because the process parameters are optimized for digital transistors and the scaling involves the reduction of supply voltages. Generally, the challenge in analog circuit design is that all salient design metrics such as power, area, bandwidth and accuracy are interrelated. Furthermore, poor flexibility, i.e. lack of reconfigurability, the reuse of IP etc., can be considered the most severe weakness of analog hardware. On this account, digital calibration schemes are often required for improved performance or yield enhancement, whereas high flexibility/reconfigurability can not be easily achieved. Here, it is discussed whether it is possible to work around these obstacles by using floating-gate transistors (FGTs), and analyze problems associated with the practical implementation. FGT technology is attractive because it is electrically programmable and also features a charge-based built-in non-volatile memory. Apart from being ideal for canceling the circuit non-idealities due to process variations, the FGTs can also be used as computational or adaptive elements in analog circuits. The nominal gate oxide thickness in the deep sub-micron (DSM) processes is too thin to support robust charge retention and consequently the FGT becomes leaky. In principle, non-leaky FGTs can be implemented in a scaled down process without any special masks by using “double”-oxide transistors intended for providing devices that operate with higher supply voltages than general purpose devices. However, in practice the technology scaling poses several challenges which are addressed in this thesis. To provide a sufficiently wide-ranging survey, six prototype chips with varying complexity were implemented in four different DSM process nodes and investigated from this perspective. The focus is on non-leaky FGTs, but the presented autozeroing floating-gate amplifier (AFGA) demonstrates that leaky FGTs may also find a use. The simplest test structures contain only a few transistors, whereas the most complex experimental chip is an implementation of a spiking neural network (SNN) which comprises thousands of active and passive devices. More precisely, it is a fully connected (256 FGT synapses) two-layer spiking neural network (SNN), where the adaptive properties of FGT are taken advantage of. A compact realization of Spike Timing Dependent Plasticity (STDP) within the SNN is one of the key contributions of this thesis. Finally, the considerations in this thesis extend beyond CMOS to emerging nanodevices. To this end, one promising emerging nanoscale circuit element - memristor - is reviewed and its applicability for analog processing is considered. Furthermore, it is discussed how the FGT technology can be used to prototype computation paradigms compatible with these emerging two-terminal nanoscale devices in a mature and widely available CMOS technology.Siirretty Doriast

Automated Synthesis of Unconventional Computing Systems

Despite decades of advancements, modern computing systems which are based on the von Neumann architecture still carry its shortcomings. Moore\u27s law, which had substantially masked the effects of the inherent memory-processor bottleneck of the von Neumann architecture, has slowed down due to transistor dimensions nearing atomic sizes. On the other hand, modern computational requirements, driven by machine learning, pattern recognition, artificial intelligence, data mining, and IoT, are growing at the fastest pace ever. By their inherent nature, these applications are particularly affected by communication-bottlenecks, because processing them requires a large number of simple operations involving data retrieval and storage. The need to address the problems associated with conventional computing systems at the fundamental level has given rise to several unconventional computing paradigms. In this dissertation, we have made advancements for automated syntheses of two types of unconventional computing paradigms: in-memory computing and stochastic computing. In-memory computing circumvents the problem of limited communication bandwidth by unifying processing and storage at the same physical locations. The advent of nanoelectronic devices in the last decade has made in-memory computing an energy-, area-, and cost-effective alternative to conventional computing. We have used Binary Decision Diagrams (BDDs) for in-memory computing on memristor crossbars. Specifically, we have used Free-BDDs, a special class of binary decision diagrams, for synthesizing crossbars for flow-based in-memory computing. Stochastic computing is a re-emerging discipline with several times smaller area/power requirements as compared to conventional computing systems. It is especially suited for fault-tolerant applications like image processing, artificial intelligence, pattern recognition, etc. We have proposed a decision procedures-based iterative algorithm to synthesize Linear Finite State Machines (LFSM) for stochastically computing non-linear functions such as polynomials, exponentials, and hyperbolic functions