Synthesis of Liveness-Enforcing Petri Net Supervisors Based on a Think-Globally-Act-Locally Approach and a Structurally Minimal Method for Flexible Manufacturing Systems

This paper proposes a deadlock prevention policy for flexible manufacturing systems (FMSs) based on a think-globally-act-locally approach and a structurally minimal method. First, by using the think-globally-act-locally approach, a global idle place is temporarily added to a Petri net model with deadlocks. Then, at each iteration, an integer linear programming problem is formulated to design a minimal number of maximally permissive control places. Therefore, a supervisor with a low structural complexity is obtained since the number of control places is greatly compressed. Finally, by adding the designed supervisor, the resulting net model is optimally or near-optimally controlled. Three examples from the literature are used to illustrate the proposed method

Deadlock Prevention Policy with Behavioral Optimality or Suboptimality Achieved by the Redundancy Identification of Constraints and the Rearrangement of Monitors

This work develops an iterative deadlock prevention method for a special class of Petri nets that can well model a variety of flexible manufacturing systems. A deadlock detection technique, called mixed integer programming (MIP), is used to find a strict minimal siphon (SMS) in a plant model without a complete enumeration of siphons. The policy consists of two phases. At the first phase, SMSs are obtained by MIP technique iteratively and monitors are added to the complementary sets of the SMSs. For the possible existence of new siphons generated after the first phase, we add monitors with their output arcs first pointed to source transitions at the second phase to avoid new siphons generating and then rearrange the output arcs step by step on condition that liveness is preserved. In addition, an algorithm is proposed to remove the redundant constraints of the MIP problem in this paper. The policy improves the behavioral permissiveness of the resulting net and greatly enhances the structural simplicity of the supervisor. Theoretical analysis and experimental results verify the effectiveness of the proposed method

Supervisory Control and Analysis of Partially-observed Discrete Event Systems

Nowadays, a variety of real-world systems fall into discrete event systems (DES). In practical scenarios, due to facts like limited sensor technique, sensor failure, unstable network and even the intrusion of malicious agents, it might occur that some events are unobservable, multiple events are indistinguishable in observations, and observations of some events are nondeterministic. By considering various practical scenarios, increasing attention in the DES community has been paid to partially-observed DES, which in this thesis refer broadly to those DES with partial and/or unreliable observations. In this thesis, we focus on two topics of partially-observed DES, namely, supervisory control and analysis. The first topic includes two research directions in terms of system models. One is the supervisory control of DES with both unobservable and uncontrollable events, focusing on the forbidden state problem; the other is the supervisory control of DES vulnerable to sensor-reading disguising attacks (SD-attacks), which is also interpreted as DES with nondeterministic observations, addressing both the forbidden state problem and the liveness-enforcing problem. Petri nets (PN) are used as a reference formalism in this topic. First, we study the forbidden state problem in the framework of PN with both unobservable and uncontrollable transitions, assuming that unobservable transitions are uncontrollable. For ordinary PN subject to an admissible Generalized Mutual Exclusion Constraint (GMEC), an optimal on-line control policy with polynomial complexity is proposed provided that a particular subnet, called observation subnet, satisfies certain conditions in structure. It is then discussed how to obtain an optimal on-line control policy for PN subject to an arbitrary GMEC. Next, we still consider the forbidden state problem but in PN vulnerable to SD-attacks. Assuming the control specification in terms of a GMEC, we propose three methods to derive on-line control policies. The first two lead to an optimal policy but are computationally inefficient for large-size systems, while the third method computes a policy with timely response even for large-size systems but at the expense of optimality. Finally, we investigate the liveness-enforcing problem still assuming that the system is vulnerable to SD-attacks. In this problem, the plant is modelled as a bounded PN, which allows us to off-line compute a supervisor starting from constructing the reachability graph of the PN. Then, based on repeatedly computing a more restrictive liveness-enforcing supervisor under no attack and constructing a basic supervisor, an off-line method that synthesizes a liveness-enforcing supervisor tolerant to an SD-attack is proposed. In the second topic, we care about the verification of properties related to system security. Two properties are considered, i.e., fault-predictability and event-based opacity. The former is a property in the literature, characterizing the situation that the occurrence of any fault in a system is predictable, while the latter is a newly proposed property in the thesis, which describes the fact that secret events of a system cannot be revealed to an external observer within their critical horizons. In the case of fault-predictability, DES are modeled by labeled PN. A necessary and sufficient condition for fault-predictability is derived by characterizing the structure of the Predictor Graph. Furthermore, two rules are proposed to reduce the size of a PN, which allow us to analyze the fault-predictability of the original net by verifying that of the reduced net. When studying event-based opacity, we use deterministic finite-state automata as the reference formalism. Considering different scenarios, we propose four notions, namely, K-observation event-opacity, infinite-observation event-opacity, event-opacity and combinational event-opacity. Moreover, verifiers are proposed to analyze these properties

On the decidability of problems in liveness of controlled Discrete Event Systems modeled by Petri Nets

A Discrete Event System (DES) is a discrete-state system, where the state changes at discrete-time instants due to the occurrence of events. Informally, a liveness property stipulates that a 'good thing' happens during the evolution of a system. Some examples of liveness properties include starvation freedom -- where the 'good thing' is the process making progress; termination -- in which the good thing is for an evolution to not run forever; and guaranteed service -- such as in resource allocation systems, when every request for resource is satisfied eventually. In this thesis, we consider supervisory policies for DESs that, when they exist, enforce a liveness property by appropriately disabling a subset of preventable events at certain states in the evolution of DES. One of the main contributions of this thesis is the development of a system-theoretic framework for the analysis of Liveness Enforcing Supervisory Policies (LESPs) for DESs. We model uncertainties in the forward- and feedback-path, and present necessary and sufficient conditions for the existence of Liveness Enforcing Supervisory Policies (LESPs) for a general model of DESs in this framework. The existence of an LESP reduces to the membership of the initial state to an appropriately defined set. The membership problem is undecidable. For characterizing decidable instances of this membership problem, we consider a modeling paradigm of DESs known as Petri Nets, which have applications in modeling concurrent systems, software design, manufacturing systems, etc. Petri Net (PN) models are inherently monotonic in the sense that if a transition (which loosely represents an event of the DES) can fire from a marking (a non-negative integer-valued vector that represents the state of the DES being modeled), then it can also fire from any larger marking. The monotonicity creates a possibility of representing an infinite-state system using what can be called a "finite basis" that can lead to decidability. However, we prove that several problems of our interest are still undecidable for arbitrary PN models. That is, informally, a general PN model is still too powerful for the analysis that we are interested in. Much of the thesis is devoted to the characterization of decidable instances of the existence of LESPs for arbitrary PN models within the system-theoretic framework introduced in the thesis. The philosophical implication of the results in this thesis is the existence of what can be called a "finite basis" of an infinite state system under supervision, on which the membership tests can be performed in finite time; hence resulting in the decidability of problems and finite-time termination of algorithms. The thesis discusses various scenarios where such a finite basis exists and how to find them

Intelligent Colored Token Petri Nets for Modeling, Control, and Validation of Dynamic Changes in Reconfigurable Manufacturing Systems

The invention of reconfigurable manufacturing systems (RMSs) has created a challenging problem: how to quickly and effectively modify an RMS to address dynamic changes in a manufacturing system, such as processing failures and rework, machine breakdowns, addition of new machines, addition of new products, removal of old machines, and changes in processing routes induced by the competitive global market. This paper proposes a new model, the intelligent colored token Petri net (ICTPN), to simulate dynamic changes or reconfigurations of a system. The main idea is that intelligent colored tokens denote part types that represent real-time knowledge about changes and status of a system. Thus, dynamic configurations of a system can be effectively modeled. The developed ICTPN can model dynamic changes of a system in a modular manner, resulting in the development of a very compact model. In addition, when configurations appear, only the changed colored token of the part type from the current model has to be modified. Based on the resultant ICTPN model, deadlock-free, conservative, and reversible behavioral properties, among others, are guaranteed. The developed ICTPN model was tested and validated using the GPenSIM tool and compared with existing methods from the literature.publishedVersio

Property Enforcement for Partially-Observed Discrete-Event Systems

Engineering systems that involve physical elements, such as automobiles, aircraft, or electric power pants, that are controlled by a computational infrastructure that consists of several computers that communicate through a communication network, are called Cyber-Physical Systems. Ever-increasing demands for safety, security, performance, and certi cation of these critical systems put stringent constraints on their design and necessitate the use of formal model-based approaches to synthesize provably-correct feedback controllers. This dissertation aims to tackle these challenges by developing a novel methodology for synthesis of control and sensing strategies for Discrete Event Systems (DES), an important class of cyber-physical systems. First, we develop a uniform approach for synthesizing property enforcing supervisors for a wide class of properties called information-state-based (IS-based) properties. We then consider the enforcement of non-blockingness in addition to IS-based properties. We develop a nite structure called the All Enforcement Structure (AES) that embeds all valid supervisors. Furthermore, we propose novel and general approaches to solve the sensor activation problem for partially-observed DES. We extend our results for the sensor activation problem from the centralized case to the decentralized case. The methodology in the dissertation has the following novel features: (i) it explicitly considers and handles imperfect state information, due to sensor noise, and limited controllability, due to unexpected environmental disturbances; (ii) it is a uniform information-state-based approach that can be applied to a variety of user-speci ed requirements; (iii) it is a formal model-based approach, which results in provably correct solutions; and (iv) the methodology and associated theoretical foundations developed are generic and applicable to many types of networked cyber-physical systems with safety-critical requirements, in particular networked systems such as aircraft electric power systems and intelligent transportation systems.PHDElectrical Engineering: SystemsUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/137097/1/xiangyin_1.pd

Confusion Analysis and Detection for Workflow Nets

Option processes often occur in a business procedure with respect to resource competition. In a business procedure modeled with a workflow net (WF-net), all decision behavior and option operations for business tasks are modeled and performed by the conflicts in corresponding WF-net. Concurrency in WF-nets is applied to keep a high-performance operation of business procedures. However, the firing of concurrent transitions in a WF-net may lead to the disappearance of conflicts in the WF-net. The phenomenon is usually called confusions that produces difficulties for the resolution of conflicts. This paper investigates confusion detection problems in WF-nets. First, confusions are formalized as a class of marked subnets with special conflicting and concurrent features. Second, a detection approach based on the characteristics of confusion subnets and the integer linear programming (ILP) is developed, which is not required to compute the reachability graph of a WF-net. Examples of the confusion detection in WF-nets are presented. Finally, the impact of confusions on the properties of WF-nets is specified

Modeling and verification of reconfigurable discrete event control systems

Most modern technological systems rely on complicated control technologies, computer technologies, and networked communication technologies. Their dynamic behavior is intricate due to the concurrence and conflict of various signals. Such complex systems are studied as discrete event control systems (DECSs), while the detailed continuous variable processes are abstracted. Dynamic reconfigurable systems are the trend of all future technological systems, such as flight control systems, vehicle electronic systems, and manufacturing systems. In order to meet control requirements continuously, such a dynamic reconfigurable system is able to actively adjust its configuration at runtime by modifying ist components, connections among components and data, while changes are detected in the internal/external execution environment. Model based design methodologies attract wide attention since they can detect system defect earlier, increase system reliability, and decrease time and cost on system development. An accurate, compact, and easy formal model to be analyzed is the first step of model based design methods. Formal verification is an expected effective method to completely check if a designed system meets all requirements and to improve the system design scheme. Considering the potential benefits of Timed Net Condition/Event Systems (TNCESs) in modeling and analyzing reconfigurable systems, this dissertation deals with formal modeling and verification of reconfigurable discrete event control systems (RDECSs) based on them.Die meisten modernen technologischen Systeme benötigen aufwändige Steuerungs-, Rechner- und Kommunikationstechnologien. Aufgrund von Nebenläufigkeit und Konflikten ergibt sich ein kompliziertes dynamisches Verhalten. Derartige komplexe Systeme werden dadurch untersucht, dass man sie als ereignisdiskrete Steuerungssysteme (Discrete Event Control Systems, DECSs) betrachtet und dabei die detaillierten unterlagerten kontinuierlichen Prozesse abstrahiert. Um die Anforderungen an die Steuerung durchgängig erfüllen zu können adaptieren sich dynamische rekonfigurierbare Systeme zur Laufzeit durch Modifikation ihrer Komponenten, deren Verbindungen untereinander und der gespeicherten Daten, sobald Änderungen in der internen oder externen Umgebung festgestellt werden. Beispiele für dynamische Rekonfigurierbare Systeme finden sich in der Luftfahrt, im Automobilbereich aber auch in Fertigungssystemen. Modellbasierte Entwicklungsmethoden erfreuen sich zunehmender Beliebtheit, da sie es erlauben Fehler früher im Entwicklungsprozess aufzudecken und damit zu höherer Systemverfügbarkeit bei verkürzter Entwicklungszeit führen. Ein formales Modell des Systems bildet hierbei den ersten wichtigen Schritt. Durch formale Verifikation kann dieses Modell effektiv und vollständig überprüft und ggf. verbessert werden. Eine geeignete Modellform hierfür sind Timed Net Condition/Event Systems (TNCESs). Die vorliegende Dissertation befasst sich mit der Anwendung von TNCES zur Modellierung und Verifikation rekonfigurierbarer ereignisdiskreter Steuerungssysteme (RDECSs)

Design and Management of Manufacturing Systems

Although the design and management of manufacturing systems have been explored in the literature for many years now, they still remain topical problems in the current scientific research. The changing market trends, globalization, the constant pressure to reduce production costs, and technical and technological progress make it necessary to search for new manufacturing methods and ways of organizing them, and to modify manufacturing system design paradigms. This book presents current research in different areas connected with the design and management of manufacturing systems and covers such subject areas as: methods supporting the design of manufacturing systems, methods of improving maintenance processes in companies, the design and improvement of manufacturing processes, the control of production processes in modern manufacturing systems production methods and techniques used in modern manufacturing systems and environmental aspects of production and their impact on the design and management of manufacturing systems. The wide range of research findings reported in this book confirms that the design of manufacturing systems is a complex problem and that the achievement of goals set for modern manufacturing systems requires interdisciplinary knowledge and the simultaneous design of the product, process and system, as well as the knowledge of modern manufacturing and organizational methods and techniques