Compiler-managed memory system for software-exposed architectures

Thesis (Ph.D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2000.Includes bibliographical references (p. 155-161).Microprocessors must exploit both instruction-level parallelism (ILP) and memory parallelism for high performance. Sophisticated techniques for ILP have boosted the ability of modern-day microprocessors to exploit ILP when available. Unfortunately, improvements in memory parallelism in microprocessors have lagged behind. This thesis explains why memory parallelism is hard to exploit in microprocessors and advocate bank-exposed architectures as an effective way to exploit more memory parallelism. Bank exposed architectures are a kind of software-exposed architecture: one in which the low level details of the hardware are visible to the software. In a bank-exposed architecture, the memory banks are visible to the software, enabling the compiler to exploit a high degree of memory parallelism in addition to ILP. Bank-exposed architectures can be employed by general-purpose processors, and by embedded chips, such as those used for digital-signal processing. This thesis presents Maps, an enabling compiler technology for bank-exposed architectures. Maps solves the problem of bank-disambiguation, i.e., how to distribute data in sequential programs among several banks to best exploit memory parallelism, while retaining the ability to disambiguate each data reference to a particular bank. Two methods for bank disambiguation are presented: equivalence-class unification and modulo unrolling. Taking a sequential program as input, a bank-disambiguation method produces two outputs: first, a distribution of each program object among the memory banks; and second, a bank number for every reference that can be proven to access a single, known bank for that data distribution. Finally, the thesis shows why non-disambiguated accesses are sometimes desirable. Dependences between disambiguated and non-disambiguated accesses are enforced through explicit synchronization and software serial ordering. The MIT Raw machine is an example of a software-exposed architecture. Raw exposes its ILP, memory and communication mechanisms. The Maps system has been implemented in the Raw compiler. Results on Raw using sequential codes demonstrate that using bank disambiguation in addition to ILP improves performance by a factor of 3 to 5 over using ILP alone.by Rajeev Barua.Ph.D

MOM: a matrix SIMD instruction set architecture for multimedia applications

MOM is a novel matrix-oriented ISA paradigm for multimedia applications, based on fusing conventional vector ISAs with SIMD ISAs such as MMX. This paper justifies why MOM is a suitable alternative for the multimedia domain due to its efficiency handling the small matrix structures typically found in most multimedia kernels. MOM leverages a performance boost between 1.3x and 4x over more conventional multimedia extensions (such as MMX and MDMX), which already achieve performance benefits ranging from 1.3x to 15x over conventional Alpha code. Moreover, MOM exhibit a high relative performance for low-issue rates and a high tolerance to memory latency. Both advantages present MOM as an attractive alternative for the embedded domain.Peer ReviewedPostprint (published version

A vector-µSIMD-VLIW architecture for multimedia applications

Media processing has motivated strong changes in the focus and design of processors. These applications are composed of heterogeneous regions of code, some of them with high levels of DLP and other ones with only modest amounts of ILP. A common approach to deal with these applications are /spl mu/SIMD-VLIWprocessors. However, the ILP regions fail to scale when we increase the width of the machine, which, on the other hand, is desired to achieve high performance in the DLP regions. In this paper, we propose and evaluate adding vector capabilities to a /spl mu/SIMD-VLIW core to speed-up the execution of the DLP regions, while, at the same time, reducing the fetch bandwidth requirements. Results show that, in the DLP regions, both 2 and 4-issue width vector-/spl mu/SIMD-VLIW architectures outperform a 8-issue width /spl mu/SIMD-VLIW in factors of up to 2.7X and 4.2X (1.6X and 2.1X in average) respectively. As a result, the DLP regions become less than 10% of the total execution time and performance is dominated by the ILP regions.Peer ReviewedPostprint (published version

Using Maltego Tungsten to explore the cyber-physical confluence in geolocation

Ever wonder how to map parts of cyberspace (the Surface Web) with the physical world? Maltego Tungsten™ (v. 3.4.0) is a high-end (penetration testing) tool that maps physical locations to cyber ones, and vice versa. Maltego Tungsten (formerly Maltego Radium) enables the identification of various types of location data: GPS (Global Positioning System) coordinates, locations to cities/states/countries, and more precise geo-locations. Physical location data may be identified for accounts on social media platforms (Twitter, Facebook, and others), websites, disambiguated names (even aliases), and other online data. The findings are presented in dynamic and static visual graphs and data tables. The information collected is all publicly available data referred to as “open-source intelligence”. This presentation will show how to move from the physical to the electronic and the electronic to the physical

Natural language processing

Beginning with the basic issues of NLP, this chapter aims to chart the major research activities in this area since the last ARIST Chapter in 1996 (Haas, 1996), including: (i) natural language text processing systems - text summarization, information extraction, information retrieval, etc., including domain-specific applications; (ii) natural language interfaces; (iii) NLP in the context of www and digital libraries ; and (iv) evaluation of NLP systems

The Emerging Trends of Multi-Label Learning

Exabytes of data are generated daily by humans, leading to the growing need for new efforts in dealing with the grand challenges for multi-label learning brought by big data. For example, extreme multi-label classification is an active and rapidly growing research area that deals with classification tasks with an extremely large number of classes or labels; utilizing massive data with limited supervision to build a multi-label classification model becomes valuable for practical applications, etc. Besides these, there are tremendous efforts on how to harvest the strong learning capability of deep learning to better capture the label dependencies in multi-label learning, which is the key for deep learning to address real-world classification tasks. However, it is noted that there has been a lack of systemic studies that focus explicitly on analyzing the emerging trends and new challenges of multi-label learning in the era of big data. It is imperative to call for a comprehensive survey to fulfill this mission and delineate future research directions and new applications.Comment: Accepted to TPAMI 202

HW/SW mechanisms for instruction fusion, issue and commit in modern u-processors

In this thesis we have explored the co-designed paradigm to show alternative processor design points. Specifically, we have provided HW/SW mechanisms for instruction fusion, issue and commit for modern processors. We have implemented a co-designed virtual machine monitor that binary translates x86 instructions into RISC like micro-ops. Moreover, the translations are stored as superblocks, which are a trace of basic blocks. These superblocks are further optimized using speculative and non-speculative optimizations. Hardware mechanisms exists in-order to take corrective action in case of misspeculations. During the course of this PhD we have made following contributions. Firstly, we have provided a novel Programmable Functional unit, in-order to speed up general-purpose applications. The PFU consists of a grid of functional units, similar to CCA, and a distributed internal register file. The inputs of the macro-op are brought from the Physical Register File to the internal register file using a set of moves and a set of loads. A macro-op fusion algorithm fuses micro-ops at runtime. The fusion algorithm is based on a scheduling step that indicates whether the current fused instruction is beneficial or not. The micro-ops corresponding to the macro-ops are stored as control signals in a configuration. The macro-op consists of a configuration ID which helps in locating the configurations. A small configuration cache is present inside the Programmable Functional unit, that holds these configurations. In case of a miss in the configuration cache configurations are loaded from I-Cache. Moreover, in-order to support bulk commit of atomic superblocks that are larger than the ROB we have proposed a speculative commit mechanism. For this we have proposed a Speculative commit register map table that holds the mappings of the speculatively committed instructions. When all the instructions of the superblock have committed the speculative state is copied to Backend Register Rename Table. Secondly, we proposed a co-designed in-order processor with with two kinds of accelerators. These FU based accelerators run a pair of fused instructions. We have considered two kinds of instruction fusion. First, we fused a pair of independent loads together into vector loads and execute them on vector load units. For the second kind of instruction fusion we have fused a pair of dependent simple ALU instructions and execute them in Interlock Collapsing ALUs (ICALU). Moreover, we have evaluated performance of various code optimizations such as list-scheduling, load-store telescoping and load hoisting among others. We have compared our co-designed processor with small instruction window out-of-order processors. Thirdly, we have proposed a co-designed out-of-order processor. Specifically we have reduced complexity in two areas. First of all, we have co-designed the commit mechanism, that enable bulk commit of atomic superblocks. In this solution we got rid of the conventional ROB, instead we introduce the Superblock Ordering Buffer (SOB). SOB ensures program order is maintained at the granularity of the superblock, by bulk committing the program state. The program state consists of the register state and the memory state. The register state is held in a per superblock register map table, whereas the memory state is held in gated store buffer and updated in bulk. Furthermore, we have tackled the complexity of Out-of-Order issue logic by using FIFOs. We have proposed an enhanced steering heuristic that fixes the inefficiencies of the existing dependence-based heuristic. Moreover, a mechanism to release the FIFO entries earlier is also proposed that further improves the performance of the steering heuristic.En aquesta tesis hem explorat el paradigma de les màquines issue i commit per processadors actuals. Hem implementat una màquina virtual que tradueix binaris x86 a micro-ops de tipus RISC. Aquestes traduccions es guarden com a superblocks, que en realitat no és més que una traça de virtuals co-dissenyades. En particular, hem proposat mecanismes hw/sw per a la fusió d’instruccions, blocs bàsics. Aquests superblocks s’optimitzen utilitzant optimizacions especualtives i d’altres no speculatives. En cas de les optimizations especulatives es consideren mecanismes per a la gestió de errades en l’especulació. Al llarg d’aquesta tesis s’han fet les següents contribucions: Primer, hem proposat una nova unitat functional programmable (PFU) per tal de millorar l’execució d’aplicacions de proposit general. La PFU està formada per un conjunt d’unitats funcionals, similar al CCA, amb un banc de registres intern a la PFU distribuït a les unitats funcionals que la composen. Les entrades de la macro-operació que s’executa en la PFU es mouen del banc de registres físic convencional al intern fent servir un conjunt de moves i loads. Un algorisme de fusió combina més micro-operacions en temps d’execució. Aquest algorisme es basa en un pas de planificació que mesura el benefici de les decisions de fusió. Les micro operacions corresponents a la macro operació s’emmagatzemen com a senyals de control en una configuració. Les macro-operacions tenen associat un identificador de configuració que ajuda a localitzar d’aquestes. Una petita cache de configuracions està present dintre de la PFU per tal de guardar-les. En cas de que la configuració no estigui a la cache, les configuracions es carreguen de la cache d’instruccions. Per altre banda, per tal de donar support al commit atòmic dels superblocks que sobrepassen el tamany del ROB s’ha proposat un mecanisme de commit especulatiu. Per aquest mecanisme hem proposat una taula de mapeig especulativa dels registres, que es copia a la taula no especulativa quan totes les instruccions del superblock han comitejat. Segon, hem proposat un processador en order co-dissenyat que combina dos tipus d’acceleradors. Aquests acceleradors executen un parell d’instruccions fusionades. S’han considerat dos tipus de fusió d’instructions. Primer, combinem un parell de loads independents formant loads vectorials i els executem en una unitat vectorial. Segon, fusionem parells d’instruccions simples d’alu que són dependents i que s’executaran en una Interlock Collapsing ALU (ICALU). Per altra aquestes tecniques les hem evaluat conjuntament amb diverses optimizacions com list scheduling, load-store telescoping i hoisting de loads, entre d’altres. Aquesta proposta ha estat comparada amb un processador fora d’ordre. Tercer, hem proposat un processador fora d’ordre co-dissenyat efficient reduint-ne la complexitat en dos areas principals. En primer lloc, hem co-disenyat el mecanisme de commit per tal de permetre un eficient commit atòmic del superblocks. En aquesta solució hem substituït el ROB convencional, i en lloc hem introduït el Superblock Ordering Buffer (SOB). El SOB manté l’odre de programa a granularitat de superblock. L’estat del programa consisteix en registres i memòria. L’estat dels registres es manté en una taula per superblock, mentre que l’estat de memòria es guarda en un buffer i s’actulitza atòmicament. La segona gran area de reducció de complexitat considerarada és l’ús de FIFOs a la lògica d’issue. En aquest últim àmbit hem proposat una heurística de distribució que solventa les ineficiències de l’heurística basada en dependències anteriorment proposada. Finalment, i junt amb les FIFOs, s’ha proposat un mecanisme per alliberar les entrades de la FIFO anticipadament

Optimizing SIMD execution in HW/SW co-designed processors

SIMD accelerators are ubiquitous in microprocessors from different computing domains. Their high compute power and hardware simplicity improve overall performance in an energy efficient manner. Moreover, their replicated functional units and simple control mechanism make them amenable to scaling to higher vector lengths. However, code generation for these accelerators has been a challenge from the days of their inception. Compilers generate vector code conservatively to ensure correctness. As a result they lose significant vectorization opportunities and fail to extract maximum benefits out of SIMD accelerators. This thesis proposes to vectorize the program binary at runtime in a speculative manner, in addition to the compile time static vectorization. There are different environments that support runtime profiling and optimization support required for dynamic vectorization, one of most prominent ones being: 1) Dynamic Binary Translators and Optimizers (DBTO) and 2) Hardware/Software (HW/SW) Co-designed Processors. HW/SW co-designed environment provides several advantages over DBTOs like transparent incorporations of new hardware features, binary compatibility, etc. Therefore, we use HW/SW co-designed environment to assess the potential of speculative dynamic vectorization. Furthermore, we analyze vector code generation for wider vector units and find out that even though SIMD accelerators are amenable to scaling from the hardware point of view, vector code generation at higher vector length is even more challenging. The two major factors impeding vectorization for wider SIMD units are: 1) Reduced dynamic instruction stream coverage for vectorization and 2) Large number of permutation instructions. To solve the first problem we propose Variable Length Vectorization that iteratively vectorizes for multiple vector lengths to improve dynamic instruction stream coverage. Secondly, to reduce the number of permutation instructions we propose Selective Writing that selectively writes to different parts of a vector register and avoids permutations. Finally, we tackle the problem of leakage energy in SIMD accelerators. Since SIMD accelerators consume significant amount of real estate on the chip, they become the principle source of leakage if not utilized judiciously. Power gating is one of the most widely used techniques to reduce leakage energy of functional units. However, power gating has its own energy and performance overhead associated with it. We propose to selectively devectorize the vector code when higher SIMD lanes are used intermittently. This selective devectorization keeps the higher SIMD lanes idle and power gated for maximum duration. Therefore, resulting in overall leakage energy reduction.Postprint (published version