Design of a 3 GHz fine resolution LC DCO

In this thesis, the design of a fine resolution LC digitally controlled oscillator (DCO) is introduced. Two NMOS varactor banks are used to achieve 12 bits medium and fine frequency tuning. Both delta-sigma modulator and capacitive divider circuit are implemented to achieve a finer resolution and a larger dynamic range. The LC-oscillator has a coarse tuning range from 3.05 GHz to 3.85 GHz and a fine tuning range of 50MHz. It features a phase noise level of -115dBc/Hz at 1MHz frequency offset and consumes 5.4mW. Efficient simulation methodology is explored. Finally, this DCO is simulated in an All-Digital Phase Locked Loop (ADPLL) with other ideal behavior blocks implemented using Verilog-A, and the performance of the DCO is evaluated.Electrical and Computer Engineerin

Design and implementation of a wideband sigma delta ADC

Abstract. High-speed and wideband ADCs have become increasingly important in response to the growing demand for high-speed wireless communication services. Continuous time sigma delta modulators (CTƩ∆M), well-known for their oversampling and noise shaping properties, offer a promising solution for low-power and high-speed design in wireless applications. The objective of this thesis is to design and implement a wideband CTƩ∆M for a global navigation satellite system(GNSS) receiver. The targeted modulator architecture is a 3rdorder single-bit CTƩ∆M, specifically designed to operate within a 15 MHz signal bandwidth. With an oversampling ratio of 25, the ADC’s sampling frequency is set at 768 MHz. The design goal is to achieve a theoretical signal to noise ratio (SNR) of 55 dB. This thesis focuses on the design and implementation of the CTƩ∆M, building upon the principles of a discrete time Ʃ∆ modulator, and leveraging system-level simulation and formulations. A detailed explanation of the coefficient calculation procedure specific to CTƩ∆ modulators is provided, along with a "top-down" design approach that ensures the specified requirements are met. MATLAB scripts for coefficient calculation are also included. To overcome the challenges associated with the implementation of CTƩ∆ modulators, particularly excess loop delay and clock jitter sensitivity, this thesis explores two key strategies: the introduction of a delay compensation path and the utilization of a finite impulse response (FIR) feedback DAC. By incorporating a delay compensation path, the stability of the modulator can be ensured and its noise transfer function (NTF) can be restored. Additionally, the integration of an FIR feedback DAC addresses the issue of clock jitter sensitivity, enhancing the overall performance and robustness of the CTƩ∆M. The CTƩ∆Ms employ the cascade of integrators with feed forward (CIFF) and cascade of integrators with feedforward and feedback (CIFF-B) topologies, with a particular emphasis on the CIFF-B configuration using 22nm CMOS technology node and a supply voltage of 0.8 V. Various simulations are performed to validate the modulator’s performance. The simulation results demonstrate an achievable SNR of 55 dB with a power consumption of 1.36 mW. Furthermore, the adoption of NTF zero optimization techniques enhances the SNR to 62 dB.Laajakaistaisen jatkuva-aikaisen sigma delta-AD-muuntimen suunnittelu ja toteutus. Tiivistelmä. Nopeat ja laajakaistaiset AD-muuntimet ovat tulleet entistä tärkeämmiksi nopeiden langattomien kommunikaatiopalvelujen kysynnän kasvaessa. Jatkuva-aikaiset sigma delta -modulaattorit (CTƩ∆M), joissa käytetään ylinäytteistystä ja kohinanmuokkausta, tarjoavat lupaavan ratkaisun matalan tehonkulutuksen ja nopeiden langattomien sovellusten suunnitteluun. Tämän työn tarkoituksena on suunnitella ja toteuttaa laajakaistainen jatkuva -aikainen sigma delta -modulaattori satelliittipaikannusjärjestelmien (GNSS) vastaanottimeen. Arkkitehtuuriltaan modulaattori on kolmannen asteen 1-bittinen CTƩ∆M, jolla on 15MHz:n signaalikaistanleveys. Ylinäytteistyssuhde on 25 ja AD muuntimen näytteistystaajuus 768 MHz. Tavoitteena on saavuttaa teoreettinen 55 dB signaalikohinasuhde (SNR). Tämä työ keskittyy jatkuva-aikaisen sigma delta -modulaattorin suunnitteluun ja toteutukseen, perustuen diskreettiaikaisen Ʃ∆-modulaattorin periaatteisiin ja systeemitason simulointiin ja mallitukseen. Jatkuva-aikaisen sigma delta -modulaattorin kertoimien laskentamenetelmä esitetään yksityiskohtaisesti, ja vaatimusten täyttyminen varmistetaan “top-down” -suunnitteluperiaatteella. Liitteenä on kertoimien laskemiseen käytetty MATLAB-koodi. Jatkuva-aikaisten sigma delta -modulaattoreiden erityishaasteiden, liian pitkän silmukkaviiveen ja kellojitterin herkkyyden, voittamiseksi tutkitaan kahta strategiaa, viiveen kompensointipolkua ja FIR takaisinkytkentä -DA muunninta. Viivekompensointipolkua käyttämällä modulaattorin stabiilisuus ja kohinansuodatusfunktio saadaan varmistettua ja korjattua. Lisäksi FIR takaisinkytkentä -DA-muuntimen käyttö pienentää kellojitteriherkkyyttä, parantaen jatkuva aikaisen sigma delta -modulaattorin kokonaissuorituskykyä ja luotettavuutta. Toteutetuissa jatkuva-aikaisissa sigma delta -modulaattoreissa on kytketty peräkkäin integraattoreita myötäkytkentärakenteella (CIFF) ja toisessa sekä myötä- että takaisinkytkentärakenteella (CIFF-B). Päähuomio on CIFF-B rakenteessa, joka toteutetaan 22nm CMOS prosessissa käyttäen 0.8 voltin käyttöjännitettä. Suorityskyky varmistetaan erilaisilla simuloinneilla, joiden perusteella 55 dB SNR saavutetaan 1.36 mW tehonkulutuksella. Lisäksi kohinanmuokkausfunktion optimoinnilla SNR saadaan nostettua 62 desibeliin

Low-pass CMOS Sigma-Delta Converter

A crescente necessidade em dar-se uma melhor saúde à população obriga ao desenvolvimento de novos e melhores dispositivos médicos. Atualmente, uma área de desenvolvimento importante é a de dispositivos portáteis para análise de sinais biológicos, tais como o eletrocardiograma ou o electroencefalograma, ajudando os profissionais de saúde a fazer rápidos diagnósticos no terreno, ou mesmo para serem usados por cidadãos que necessitem de vigilância constante. O desenvolvimento destes aparelhos traz novos desafios para a comunidade cientifica, nomeadamente na interface analógico/digital, na qualidade dos dados obtidos e no gasto energético. Para se conceber um bom dispositivos médico é necessário um conversor analógico/digital para frequências baixas, com baixo consumo energético e elevada resolução. Esta dissertação começa por fornecer ao leitor a teoria básica sobre conversores analógico/digital (ADC) e estado de arte. Como principal objetivo do trabalho desenvolvido, é descrito o desenho de um ADC baseado numa arquitetura Sigma-Delta que vá de encontro aos requisitos mencionados. O conversor foi implementado numa tecnologia 130 nm CMOS, usando uma frequência de amostragem de 1 MHz, com uma largura de banda de 1 kHz e tensão de alimentação 1,2 V. É usada, nos integradores do sigma-delta, uma invulgar tipologia de Opamp de forma a obter um ganho elevado, sem recurso a técnicas cascode. O quantizador possui uma resolução de 1,5 bits e é realizado com dois comparadores dinâmicos, de forma a minimizar o consumo energético.The growing need to provide better health for the population requires the development of new and better medical devices. Portable devices for the analysis of biological signals, such as the electrocardiogram or electroencephalogram, is nowadays an important development, helping health professionals to come up with fast diagnoses on the field, or even for use by citizens who require constant vigilance . Developing these devices brings new challenges to the scientific community, namely at the analog/digital interface, the quality of data and power consumption. In order to design a good medical device it is necessary an analog/digital converter for low frequencies, with low power consumption and high resolution. This dissertation begins by providing the reader with the basic theory of analog/digital (ADC) and its state of the art. The main goal of the work is the design of an ADC based on a Sigma-Delta architecture that meets the necessary medical requirements. The converter was implemented in a 130 nm CMOS technology using a sampling frequency of 1 MHz, with a bandwidth of 1 kHz, and a source voltage of 1.2 V. The integrators of sigma-delta employs an unusual Opamp typology in order to reach a high gain, without resourcing to cascode techniques. The quantizer has a resolution of 1.5 bits and is realized with two dynamic comparators, in order to minimize power consumption

A new offset cancellation technique for temperature sensors & Design of 8-bit decimation filter for biomedical applications

In our day to day life there are lot of things which we need to sense and then decide the course of action according to it. Many of these can be physically sensed easily, but the exact value of the sensed cannot be determined by human. There will be a lot of error in judged value and exact value. So instead of human sensing them and judging the exact value there are physical instruments which can provide lot more accurate value of sensed item than human, which are called SENSORS. There are lot of different sensors for sensing different things and one of prominent one is temperature sensor. Temperature sensor plays an important role in many applications. For example, maintaining a specific temperature is essential for equipment used to fabricate medical drugs, heat liquids or clean other equipment. For application like these, the accuracy of detection can be critical. The work done in this Thesis shows how to maintain the accuracy of temperature sensor. Temperature sensor used here is a Wheatstone bridge circuit consisting of two resistors and two thermistors. Mismatch between the resistors or thermistors will lead to incorrect detection of value, which is called OFFSET, therefore to maintain the accuracy the mismatch has to be minimized or removed. One of the Technique to minimize the offset and results pertaining to it has been displayed in this Thesis. Technique described in this Thesis consist of first sensing the difference between resistors value, one being the reference resistor and other the on-chip resistor used in temperature sensing, second amplifying the difference of resistor value using OPAMP, third sending the amplified signal to single ended SAR ADC, which gives digital bits as output. And according to the digital output changing resistor value using resistor switching method. Thus then this resistor will be used in wheat stone bridge temperature sensing. The work proposed here can increase or decrease on-chip resistor value depending on reference resistor. The wheat stone bridge Resistor can be changed by plus minus 5K ohms with respect to reference resistor. This is a onetime calibration technique used before start of sensing temperature. After the resistor have been calibrated, these resistors are used in wheat stone bridge along with thermistor to sense temperature and the differential output obtained through wheat stone is passed on to the dual ended SAR ADC, which gives digital representation of temperature sensed

System analysis and integration studies for a 15-micron horizon radiance measurement experiment

Systems analysis and integration studies for 15-micron horizon radiance measurement experimen

Innovative Concepts for the Electronic Interface of Massively Parallel MRI Phased Imaging Arrays

In Magnetic Resonance Imaging (MRI), the concept of parallel imaging shows significant enhancements in boosting the signal-to-noise ratio, reducing the imaging time, and enlarging the imaging field of view. However, this concept necessitates increased size, cost, and complexity of the MR system. This thesis introduces an innovative solution for the electronics of the MRI system that allows parallel imaging with massive number of channels while avoiding, at the same time, the associated drawback

Analysis, simulation and design of nonlinear RF circuits

The PhD project consists of two parts. The first part concerns the development of Computer Aided Design (CAD) algorithms for high-frequency circuits. Novel Padébased algorithms for numerical integration of ODEs as arise in high-frequency circuits are proposed. Both single- and multi-step methods are introduced. A large part of this section of the research is concerned with the application of Filon-type integration techniques to circuits subject to modulated signals. Such methods are tested with analog and digital modulated signals and are seen to be very effective. The results confirm that these methods are more accurate than the traditional trapezoidal rule and Runge-Kutta methods. The second part of the research is concerned with the analysis, simulation and design of RF circuits with emphasis on injection-locked frequency dividers (ILFD) and digital delta-sigma modulators (DDSM). Both of these circuits are employed in fractional-N frequency synthesizers. Several simulation methods are proposed to capture the locking range of an ILFD, such as the Warped Multi-time Partial Differential Equation (WaMPDE) and the Multiple-Phase-Condition Envelope Following (MPCENV) methods. The MPCENV method is the more efficient and accurate simulation technique and it is recommended to obviate the need for expensive experiments. The Multi-stAge noise Shaping (MASH) digital delta-sigma modulator (DDSM) is simulated in MATLAB and analysed mathematically. A novel structure employing multimoduli, termed the MM-MASH, is proposed. The goal in this design work is to reduce the noise level in the useful frequency band of the modulator. The success of the novel structure in achieving this aim is confirmed with simulations