Dialogue management using reinforcement learning

Dialogue has been widely used for verbal communication between human and robot interaction, such as assistant robot in hospital. However, this robot was usually limited by predetermined dialogue, so it will be difficult to understand new words for new desired goal. In this paper, we discussed conversation in Indonesian on entertainment, motivation, emergency, and helping with knowledge growing method. We provided mp3 audio for music, fairy tale, comedy request, and motivation. The execution time for this request was 3.74 ms on average. In emergency situation, patient able to ask robot to call the nurse. Robot will record complaint of pain and inform nurse. From 7 emergency reports, all complaints were successfully saved on database. In helping conversation, robot will walk to pick up belongings of patient. Once the robot did not understand with patient’s conversation, robot will ask until it understands. From asking conversation, knowledge expands from 2 to 10, with learning execution from 1405 ms to 3490 ms. SARSA was faster towards steady state because of higher cumulative rewards. Q-learning and SARSA were achieved desired object within 200 episodes. It concludes that RL method to overcome robot knowledge limitation in achieving new dialogue goal for patient assistant were achieved

Subspace Gaussian Mixture Models for Language Identification and Dysarthric Speech Intelligibility Assessment

En esta Tesis se ha investigado la aplicación de técnicas de modelado de subespacios de mezclas de Gaussianas en dos problemas relacionados con las tecnologías del habla, como son la identificación automática de idioma (LID, por sus siglas en inglés) y la evaluación automática de inteligibilidad en el habla de personas con disartria. Una de las técnicas más importantes estudiadas es el análisis factorial conjunto (JFA, por sus siglas en inglés). JFA es, en esencia, un modelo de mezclas de Gaussianas en el que la media de cada componente se expresa como una suma de factores de dimensión reducida, y donde cada factor representa una contribución diferente a la señal de audio. Esta factorización nos permite compensar nuestros modelos frente a contribuciones indeseadas presentes en la señal, como la información de canal. JFA se ha investigado como clasficador y como extractor de parámetros. En esta última aproximación se modela un solo factor que representa todas las contribuciones presentes en la señal. Los puntos en este subespacio se denominan i-Vectors. Así, un i-Vector es un vector de baja dimensión que representa una grabación de audio. Los i-Vectors han resultado ser muy útiles como vector de características para representar señales en diferentes problemas relacionados con el aprendizaje de máquinas. En relación al problema de LID, se han investigado dos sistemas diferentes de acuerdo al tipo de información extraída de la señal. En el primero, la señal se parametriza en vectores acústicos con información espectral a corto plazo. En este caso, observamos mejoras de hasta un 50% con el sistema basado en i-Vectors respecto al sistema que utilizaba JFA como clasificador. Se comprobó que el subespacio de canal del modelo JFA también contenía información del idioma, mientras que con los i-Vectors no se descarta ningún tipo de información, y además, son útiles para mitigar diferencias entre los datos de entrenamiento y de evaluación. En la fase de clasificación, los i-Vectors de cada idioma se modelaron con una distribución Gaussiana en la que la matriz de covarianza era común para todos. Este método es simple y rápido, y no requiere de ningún post-procesado de los i-Vectors. En el segundo sistema, se introdujo el uso de información prosódica y formántica en un sistema de LID basado en i-Vectors. La precisión de éste estaba por debajo de la del sistema acústico. Sin embargo, los dos sistemas son complementarios, y se obtuvo hasta un 20% de mejora con la fusión de los dos respecto al sistema acústico solo. Tras los buenos resultados obtenidos para LID, y dado que, teóricamente, los i-Vectors capturan toda la información presente en la señal, decidimos usarlos para la evaluar de manera automática la inteligibilidad en el habla de personas con disartria. Los logopedas están muy interesados en esta tecnología porque permitiría evaluar a sus pacientes de una manera objetiva y consistente. En este caso, los i-Vectors se obtuvieron a partir de información espectral a corto plazo de la señal, y la inteligibilidad se calculó a partir de los i-Vectors obtenidos para un conjunto de palabras dichas por el locutor evaluado. Comprobamos que los resultados eran mucho mejores si en el entrenamiento del sistema se incorporaban datos de la persona que iba a ser evaluada. No obstante, esta limitación podría aliviarse utilizando una mayor cantidad de datos para entrenar el sistema.In this Thesis, we investigated how to effciently apply subspace Gaussian mixture modeling techniques onto two speech technology problems, namely automatic spoken language identification (LID) and automatic intelligibility assessment of dysarthric speech. One of the most important of such techniques in this Thesis was joint factor analysis (JFA). JFA is essentially a Gaussian mixture model where the mean of the components is expressed as a sum of low-dimension factors that represent different contributions to the speech signal. This factorization makes it possible to compensate for undesired sources of variability, like the channel. JFA was investigated as final classiffer and as feature extractor. In the latter approach, a single subspace including all sources of variability is trained, and points in this subspace are known as i-Vectors. Thus, one i-Vector is defined as a low-dimension representation of a single utterance, and they are a very powerful feature for different machine learning problems. We have investigated two different LID systems according to the type of features extracted from speech. First, we extracted acoustic features representing short-time spectral information. In this case, we observed relative improvements with i-Vectors with respect to JFA of up to 50%. We realized that the channel subspace in a JFA model also contains language information whereas i-Vectors do not discard any language information, and moreover, they help to reduce mismatches between training and testing data. For classification, we modeled the i-Vectors of each language with a Gaussian distribution with covariance matrix shared among languages. This method is simple and fast, and it worked well without any post-processing. Second, we introduced the use of prosodic and formant information with the i-Vectors system. The performance was below the acoustic system but both were found to be complementary and we obtained up to a 20% relative improvement with the fusion with respect to the acoustic system alone. Given the success in LID and the fact that i-Vectors capture all the information that is present in the data, we decided to use i-Vectors for other tasks, specifically, the assessment of speech intelligibility in speakers with different types of dysarthria. Speech therapists are very interested in this technology because it would allow them to objectively and consistently rate the intelligibility of their patients. In this case, the input features were extracted from short-term spectral information, and the intelligibility was assessed from the i-Vectors calculated from a set of words uttered by the tested speaker. We found that the performance was clearly much better if we had available data for training of the person that would use the application. We think that this limitation could be relaxed if we had larger databases for training. However, the recording process is not easy for people with disabilities, and it is difficult to obtain large datasets of dysarthric speakers open to the research community. Finally, the same system architecture for intelligibility assessment based on i-Vectors was used for predicting the accuracy that an automatic speech recognizer (ASR) system would obtain with dysarthric speakers. The only difference between both was the ground truth label set used for training. Predicting the performance response of an ASR system would increase the confidence of speech therapists in these systems and would diminish health related costs. The results were not as satisfactory as in the previous case, probably because an ASR is a complex system whose accuracy can be very difficult to be predicted only with acoustic information. Nonetheless, we think that we opened a door to an interesting research direction for the two problems

Research of user identification using voice recognition methods

Speaker recognition task depends for more general tasks group – speech processing tasks. In comparition with other biometric tasks such as iris or fingerptint identification – user identification accuracy is lower but hardware is cheaper and more common in other devices. This work is comparision of several user identification by voice methods with the same audio recordings and different configurations of their distribution

Language identification using text, audio and video feature mapping

Unlike text language identification techniques, which are now quite mature, audio and video language identification techniques still face many challenges. One of the main challenges, due to a variety of reasons, is that there are not enough audio and video datasets. However, text data are sufficient for experiments and many text databases are free for research which leads to an interesting question: can we identify an unknown video or audio language based on the relationship between the known text languages? To answer this question, it requires us to examine two issues: language identification and language mapping. In language identification, we compare two methods which are zipping classification and N-gram modelling. An advantage of zipping classification is that it tolerates the lack of long training data and can be applied to a large variety of problems without modification. However, the N-gram model provides a high classification accuracy and efficiency which makes it worthy of consideration. Also, we evaluate another audio classification method based on the MPEG compression to compare with the general zipping tools and the N-gram model. For the language mapping section, we firstly use the Robinson-Foulds tree distance to measure the distances between the language trees and also use Sammon mapping and Shepard’s interpolation to map the language distance results from the higher dimensions to the lower dimensions and try to find the optimal language relationships in the specific dimension