Sedimentological characterization of Antarctic moraines using UAVs and Structure-from-Motion photogrammetry

In glacial environments particle-size analysis of moraines provides insights into clast origin, transport history, depositional mechanism and processes of reworking. Traditional methods for grain-size classification are labour-intensive, physically intrusive and are limited to patch-scale (1m2) observation. We develop emerging, high-resolution ground- and unmanned aerial vehicle-based ‘Structure-from-Motion’ (UAV-SfM) photogrammetry to recover grain-size information across an moraine surface in the Heritage Range, Antarctica. SfM data products were benchmarked against equivalent datasets acquired using terrestrial laser scanning, and were found to be accurate to within 1.7 and 50mm for patch- and site-scale modelling, respectively. Grain-size distributions were obtained through digital grain classification, or ‘photo-sieving’, of patch-scale SfM orthoimagery. Photo-sieved distributions were accurate to <2mm compared to control distributions derived from dry sieving. A relationship between patch-scale median grain size and the standard deviation of local surface elevations was applied to a site-scale UAV-SfM model to facilitate upscaling and the production of a spatially continuous map of the median grain size across a 0.3 km2 area of moraine. This highly automated workflow for site scale sedimentological characterization eliminates much of the subjectivity associated with traditional methods and forms a sound basis for subsequent glaciological process interpretation and analysis

White paper – On the use of LiDAR data at AmeriFlux sites

Our aim is to inform the AmeriFlux community on existing and upcoming LiDAR technologies (atmospheric Doppler or Raman LiDAR often deployed at flux sites are not considered here), how it is currently used at flux sites, and how we believe it could, in the future, further contribute to the AmeriFlux vision. Heterogeneity in vegetation and ground properties at various spatial scales is omnipresent at flux sites, and 3D mapping of canopy, understory, and ground surface can help move the science forward

The evaluation of unmanned aerial systems-based photogrammetry and terrestrial laser scanning to generate DEMs of agricultural watersheds

Agricultural watersheds tend to be places of intensive farming activities that permanently modify their microtopography. The surface characteristics of the soil vary depending on the crops that are cultivated in these areas. Agricultural soil microtopography plays an important role in the quantification of runoff and sediment transport because the presence of crops, crop residues, furrows and ridges may impact the direction of water flow. To better assess such phenomena, 3-D reconstructions of high-resolution agricultural watershed topography is essential. Fine-resolution topographic data collection technologies can be used to discern highly detailed elevation variability in these areas. Knowledge of the strengths and weaknesses of existing technologies used for data collection on agricultural watersheds may be helpful in choosing an appropriate technology. This study assesses the suitability of terrestrial laser scanning (TLS) and unmanned aerial system (UAS) photogrammetry for collecting the fine-resolution topographic data required to generate accurate, high-resolution digital elevation models (DEMs) in a small watershed area (12 ha). Because of farming activity, 14 TLS scans (≈ 25 points m− 2) were collected without using high-definition surveying (HDS) targets, which are generally used to mesh adjacent scans. To evaluate the accuracy of the DEMs created from the TLS scan data, 1,098 ground control points (GCPs) were surveyed using a real time kinematic global positioning system (RTK-GPS). Linear regressions were then applied to each DEM to remove vertical errors from the TLS point elevations, errors caused by the non-perpendicularity of the scanner’s vertical axis to the local horizontal plane, and errors correlated with the distance to the scanner’s position. The scans were then meshed to generate a DEMTLS with a 1 × 1 m spatial resolution. The Agisoft PhotoScan and MicMac software packages were used to process the aerial photographs and generate a DEMPSC (Agisoft PhotoScan) and DEMMCM (MicMac), respectively, with spatial resolutions of 1 × 1 m. Comparing the DEMs with the 1,098 GCPs showed that the DEMTLS was the most accurate data product, with a root mean square error (RMSE) of 4.5 cm, followed by the DEMMCM and the DEMPSC, which had RMSE values of 9.0 and 13.9 cm, respectively. The DEMPSC had absolute errors along the border of the study area that ranged from 15.0 to 52.0 cm, indicating the presence of systematic errors. Although the derived DEMMCM was accurate, an error analysis along a transect showed that the errors in the DEMMCM data tended to increase in areas of lower elevation. Compared with TLS, UAS is a promising tool for data collection because of its flexibility and low operational cost. However, improvements are needed in the photogrammetric processing of the aerial photographs to remove non-linear distortions

Use of LIDAR in landslide investigations: a review

This paper presents a short history of the appraisal of laser scanner technologies in geosciences used for imaging relief by high-resolution digital elevation models (HRDEMs) or 3D models. A general overview of light detection and ranging (LIDAR) techniques applied to landslides is given, followed by a review of different applications of LIDAR for landslide, rockfall and debris-flow. These applications are classified as: (1) Detection and characterization of mass movements; (2) Hazard assessment and susceptibility mapping; (3) Modelling; (4) Monitoring. This review emphasizes how LIDAR-derived HRDEMs can be used to investigate any type of landslides. It is clear that such HRDEMs are not yet a common tool for landslides investigations, but this technique has opened new domains of applications that still have to be develope

Canopy structural modeling using object-oriented image classification and laser scanning

A terrestrial laser scanning (TLS) experiment was carried out in the EAGLE 2006 campaign to characterize and model the canopy structure of the Speulderbos forest. Semi-variogram analysis was used to describe spatial variability of the surface. The dependence of the spatial variability on the applied grid size showed, that in this forest spatial details of the digital surface model are lost in the case of larger than 0.3-0.4 m grid size. Voxel statistics was used for describing the density of the canopy structure. Five zones of the canopy were identified according to their density distribution. Basic geometric structures were tested for modeling the forest at the individual tree level. The results create a firm basis for modeling physical processes in the canopy

Estimating aerodynamic roughness over complex surface terrain

Surface roughness plays a key role in determining aerodynamic roughness length (zo) and shear velocity, both of which are fundamental for determining wind erosion threshold and potential. While zo can be quantified from wind measurements, large proportions of wind erosion prone surfaces remain too remote for this to be a viable approach. Alternative approaches therefore seek to relate zo to morphological roughness metrics. However, dust-emitting landscapes typically consist of complex small-scale surface roughness patterns and few metrics exist for these surfaces which can be used to predict zo for modeling wind erosion potential. In this study terrestrial laser scanning was used to characterize the roughness of typical dust-emitting surfaces (playa and sandar) where element protrusion heights ranged from 1 to 199 mm, over which vertical wind velocity profiles were collected to enable estimation of zo. Our data suggest that, although a reasonable relationship (R2 > 0.79) is apparent between 3-D roughness density and zo, the spacing of morphological elements is far less powerful in explaining variations in zo than metrics based on surface roughness height (R2 > 0.92). This finding is in juxtaposition to wind erosion models that assume the spacing of larger-scale isolated roughness elements is most important in determining zo. Rather, our data show that any metric based on element protrusion height has a higher likelihood of successfully predicting zo. This finding has important implications for the development of wind erosion and dust emission models that seek to predict the efficiency of aeolian processes in remote terrestrial and planetary environments

Sediment Dynamics and Channel Connectivity on Hillslopes

The pattern, magnitude, and frequency of hillslope erosion and deposition are spatially varied under the influence of micro-topography and channel geometry. This research investigates the interrelationships between erosion/deposition, micro-topography, and channel connectivity on a hillslope in Loudon, Tennessee using the centimeter (cm) level temporal Digital Elevation Models collected using laser scanning. This research addressed (1) the effect of spatial resolution on the erosion/deposition quantification, and rill delineation; (2) the influences of micro-topographic factors (e.g. slope, roughness, aspect) on erosion and deposition; (3) the relationship between the structural connectivity -- depressions and confluence of rills -- and the sedimentological connectivity. I conducted (1) visual and quantitative assessments for the erosion and deposition, and the revised automated proximity and conformity analysis for the rill network; (2) quantile regression for micro-topographic factors using segmented rill basins; and (3) cross-correlation analysis using erosion and deposition series along the channels.Overall, rills are sedimentologically more dynamic than the interrill areas. A larger grid size reduces the detectable changes in both areal and volumetric quantities, and also decreases the total length and number of rills. The offset between delineated rills and the reference increases with larger grid sizes. A larger rill basin has higher erosion and deposition with the magnitude of erosion greater than deposition. The slope has a positive influence on erosion and a negative one on deposition; roughness has a positive influence on deposition and a negative one on erosion. Areas that are more north-facing experience higher erosion and lower deposition. Rill length explains 46% of the variability for erosion and 24% for deposition. The depressions are associated with higher erosion in the downslope direction. The correlations between the erosion and the confluence are positive; the correlation between the deposition and the sink is positive. Overall, the influence of structural connectivity on the sedimentological connectivity is within 25 cm in both upstream and downstream directions. This research contributes to the understanding in how the sediment movement on hillslopes is governed by topographic variations and channel connectivity, and future work may explore hillslope channels at broader geographical and temporal scales