Running stream-like programs on heterogeneous multi-core systems

All major semiconductor companies are now shipping multi-cores. Phones, PCs, laptops, and mobile internet devices will all require software that can make effective use of these cores. Writing high-performance parallel software is difficult, time-consuming and error prone, increasing both time-to-market and cost. Software outlives hardware; it typically takes longer to develop new software than hardware, and legacy software tends to survive for a long time, during which the number of cores per system will increase. Development and maintenance productivity will be improved if parallelism and technical details are managed by the machine, while the programmer reasons about the application as a whole. Parallel software should be written using domain-specific high-level languages or extensions. These languages reveal implicit parallelism, which would be obscured by a sequential language such as C. When memory allocation and program control are managed by the compiler, the program's structure and data layout can be safely and reliably modified by high-level compiler transformations. One important application domain contains so-called stream programs, which are structured as independent kernels interacting only through one-way channels, called streams. Stream programming is not applicable to all programs, but it arises naturally in audio and video encode and decode, 3D graphics, and digital signal processing. This representation enables high-level transformations, including kernel unrolling and kernel fusion. This thesis develops new compiler and run-time techniques for stream programming. The first part of the thesis is concerned with a statically scheduled stream compiler. It introduces a new static partitioning algorithm, which determines which kernels should be fused, in order to balance the loads on the processors and interconnects. A good partitioning algorithm is crucial if the compiler is to produce efficient code. The algorithm also takes account of downstream compiler passes---specifically software pipelining and buffer allocation---and it models the compiler's ability to fuse kernels. The latter is important because the compiler may not be able to fuse arbitrary collections of kernels. This thesis also introduces a static queue sizing algorithm. This algorithm is important when memory is distributed, especially when local stores are small. The algorithm takes account of latencies and variations in computation time, and is constrained by the sizes of the local memories. The second part of this thesis is concerned with dynamic scheduling of stream programs. First, it investigates the performance of known online, non-preemptive, non-clairvoyant dynamic schedulers. Second, it proposes two dynamic schedulers for stream programs. The first is specifically for one-dimensional stream programs. The second is more general: it does not need to be told the stream graph, but it has slightly larger overhead. This thesis also introduces some support tools related to stream programming. StarssCheck is a debugging tool, based on Valgrind, for the StarSs task-parallel programming language. It generates a warning whenever the program's behaviour contradicts a pragma annotation. Such behaviour could otherwise lead to exceptions or race conditions. StreamIt to OmpSs is a tool to convert a streaming program in the StreamIt language into a dynamically scheduled task based program using StarSs.Totes les empreses de semiconductors produeixen actualment multi-cores. Mòbils,PCs, portàtils, i dispositius mòbils d’Internet necessitaran programari quefaci servir eficientment aquests cores. Escriure programari paral·lel d’altrendiment és difícil, laboriós i propens a errors, incrementant tant el tempsde llançament al mercat com el cost. El programari té una vida més llarga queel maquinari; típicament pren més temps desenvolupar nou programi que noumaquinari, i el programari ja existent pot perdurar molt temps, durant el qualel nombre de cores dels sistemes incrementarà. La productivitat dedesenvolupament i manteniment millorarà si el paral·lelisme i els detallstècnics són gestionats per la màquina, mentre el programador raona sobre elconjunt de l’aplicació.El programari paral·lel hauria de ser escrit en llenguatges específics deldomini. Aquests llenguatges extrauen paral·lelisme implícit, el qual és ocultatper un llenguatge seqüencial com C. Quan l’assignació de memòria i lesestructures de control són gestionades pel compilador, l’estructura iorganització de dades del programi poden ser modificades de manera segura ifiable per les transformacions d’alt nivell del compilador.Un dels dominis de l’aplicació importants és el que consta dels programes destream; aquest programes són estructurats com a nuclis independents queinteractuen només a través de canals d’un sol sentit, anomenats streams. Laprogramació de streams no és aplicable a tots els programes, però sorgeix deforma natural en la codificació i descodificació d’àudio i vídeo, gràfics 3D, iprocessament de senyals digitals. Aquesta representació permet transformacionsd’alt nivell, fins i tot descomposició i fusió de nucli.Aquesta tesi desenvolupa noves tècniques de compilació i sistemes en tempsd’execució per a programació de streams. La primera part d’aquesta tesi esfocalitza amb un compilador de streams de planificació estàtica. Presenta unnou algorisme de partició estàtica, que determina quins nuclis han de serfusionats, per tal d’equilibrar la càrrega en els processadors i en lesinterconnexions. Un bon algorisme de particionat és fonamental per tal de queel compilador produeixi codi eficient. L’algorisme també té en compte elspassos de compilació subseqüents---específicament software pipelining il’arranjament de buffers---i modela la capacitat del compilador per fusionarnuclis. Aquesta tesi també presenta un algorisme estàtic de redimensionament de cues.Aquest algorisme és important quan la memòria és distribuïda, especialment quanles memòries locals són petites. L’algorisme té en compte latències ivariacions en els temps de càlcul, i considera el límit imposat per la mida deles memòries locals.La segona part d’aquesta tesi es centralitza en la planificació dinàmica deprogrames de streams. En primer lloc, investiga el rendiment dels planificadorsdinàmics online, non-preemptive i non-clairvoyant. En segon lloc, proposa dosplanificadors dinàmics per programes de stream. El primer és específicament pera programes de streams unidimensionals. El segon és més general: no necessitael graf de streams, però els overheads són una mica més grans.Aquesta tesi també presenta un conjunt d’eines de suport relacionades amb laprogramació de streams. StarssCheck és una eina de depuració, que és basa enValgrind, per StarSs, un llenguatge de programació paral·lela basat en tasques.Aquesta eina genera un avís cada vegada que el comportament del programa estàen contradicció amb una anotació pragma. Aquest comportament d’una altra manerapodria causar excepcions o situacions de competició. StreamIt to OmpSs és unaeina per convertir un programa de streams codificat en el llenguatge StreamIt aun programa de tasques en StarSs planificat de forma dinàmica.Postprint (published version

Temporal analysis and scheduling of hard real-time radios running on a multi-processor

On a multi-radio baseband system, multiple independent transceivers must share the resources of a multi-processor, while meeting each its own hard real-time requirements. Not all possible combinations of transceivers are known at compile time, so a solution must be found that either allows for independent timing analysis or relies on runtime timing analysis. This thesis proposes a design flow and software architecture that meets these challenges, while enabling features such as independent transceiver compilation and dynamic loading, and taking into account other challenges such as ease of programming, efficiency, and ease of validation. We take data flow as the basic model of computation, as it fits the application domain, and several static variants (such as Single-Rate, Multi-Rate and Cyclo-Static) have been shown to possess strong analytical properties. Traditional temporal analysis of data flow can provide minimum throughput guarantees for a self-timed implementation of data flow. Since transceivers may need to guarantee strictly periodic execution and meet latency requirements, we extend the analysis techniques to show that we can enforce strict periodicity for an actor in the graph; we also provide maximum latency analysis techniques for periodic, sporadic and bursty sources. We propose a scheduling strategy and an automatic scheduling flow that enable the simultaneous execution of multiple transceivers with hard-realtime requirements, described as Single-Rate Data Flow (SRDF) graphs. Each transceiver has its own execution rate and starts and stops independently from other transceivers, at times unknown at compile time, on a multiprocessor. We show how to combine scheduling and mapping decisions with the input application data flow graph to generate a worst-case temporal analysis graph. We propose algorithms to find a mapping per transceiver in the form of clusters of statically-ordered actors, and a budget for either a Time Division Multiplex (TDM) or Non-Preemptive Non-Blocking Round Robin (NPNBRR) scheduler per cluster per transceiver. The budget is computed such that if the platform can provide it, then the desired minimum throughput and maximum latency of the transceiver are guaranteed, while minimizing the required processing resources. We illustrate the use of these techniques to map a combination of WLAN and TDS-CDMA receivers onto a prototype Software-Defined Radio platform. The functionality of transceivers for standards with very dynamic behavior – such as WLAN – cannot be conveniently modeled as an SRDF graph, since SRDF is not capable of expressing variations of actor firing rules depending on the values of input data. Because of this, we propose a restricted, customized data flow model of computation, Mode-Controlled Data Flow (MCDF), that can capture the data-value dependent behavior of a transceiver, while allowing rigorous temporal analysis, and tight resource budgeting. We develop a number of analysis techniques to characterize the temporal behavior of MCDF graphs, in terms of maximum latencies and throughput. We also provide an extension to MCDF of our scheduling strategy for SRDF. The capabilities of MCDF are then illustrated with a WLAN 802.11a receiver model. Having computed budgets for each transceiver, we propose a way to use these budgets for run-time resource mapping and admissibility analysis. During run-time, at transceiver start time, the budget for each cluster of statically-ordered actors is allocated by a resource manager to platform resources. The resource manager enforces strict admission control, to restrict transceivers from interfering with each other’s worst-case temporal behaviors. We propose algorithms adapted from Vector Bin-Packing to enable the mapping at start time of transceivers to the multi-processor architecture, considering also the case where the processors are connected by a network on chip with resource reservation guarantees, in which case we also find routing and resource allocation on the network-on-chip. In our experiments, our resource allocation algorithms can keep 95% of the system resources occupied, while suffering from an allocation failure rate of less than 5%. An implementation of the framework was carried out on a prototype board. We present performance and memory utilization figures for this implementation, as they provide insights into the costs of adopting our approach. It turns out that the scheduling and synchronization overhead for an unoptimized implementation with no hardware support for synchronization of the framework is 16.3% of the cycle budget for a WLAN receiver on an EVP processor at 320 MHz. However, this overhead is less than 1% for mobile standards such as TDS-CDMA or LTE, which have lower rates, and thus larger cycle budgets. Considering that clock speeds will increase and that the synchronization primitives can be optimized to exploit the addressing modes available in the EVP, these results are very promising

Ordonnancement hybride des applications flots de données sur des systèmes embarqués multi-coeurs

Les systèmes embarqués sont de plus en plus présents dans l'industrie comme dans la vie quotidienne. Une grande partie de ces systèmes comprend des applications effectuant du traitement intensif des données: elles utilisent de nombreux filtres numériques, où les opérations sur les données sont répétitives et ont un contrôle limité. Les graphes "flots de données", grâce à leur déterminisme fonctionnel inhérent, sont très répandus pour modéliser les systèmes embarqués connus sous le nom de "data-driven". L'ordonnancement statique et périodique des graphes flot de données a été largement étudié, surtout pour deux modèles particuliers: SDF et CSDF. Dans cette thèse, on s'intéresse plus particulièrement à l'ordonnancement périodique des graphes CSDF. Le problème consiste à identifier des séquences périodiques infinies d'actionnement des acteurs qui aboutissent à des exécutions complètes à buffers bornés. L'objectif est de pouvoir aborder ce problème sous des angles différents : maximisation de débit, minimisation de la latence et minimisation de la capacité des buffers. La plupart des travaux existants proposent des solutions pour l'optimisation du débit et négligent le problème d'optimisation de la latence et propose même dans certains cas des ordonnancements qui ont un impact négatif sur elle afin de conserver les propriétés de périodicité. On propose dans cette thèse un ordonnancement hybride, nommé Self-Timed Périodique (STP), qui peut conserver les propriétés d'un ordonnancement périodique et à la fois améliorer considérablement sa performance en terme de latence.One of the most important aspects of parallel computing is its close relation to the underlying hardware and programming models. In this PhD thesis, we take dataflow as the basic model of computation, as it fits the streaming application domain. Cyclo-Static Dataflow (CSDF) is particularly interesting because this variant is one of the most expressive dataflow models while still being analyzable at design time. Describing the system at higher levels of abstraction is not sufficient, e.g. dataflow have no direct means to optimize communication channels generally based on shared buffers. Therefore, we need to link the dataflow MoCs used for performance analysis of the programs, the real time task models used for timing analysis and the low-level model used to derive communication times. This thesis proposes a design flow that meets these challenges, while enabling features such as temporal isolation and taking into account other challenges such as predictability and ease of validation. To this end, we propose a new scheduling policy noted Self-Timed Periodic (STP), which is an execution model combining Self-Timed Scheduling (STS) with periodic scheduling. In STP scheduling, actors are no longer strictly periodic but self-timed assigned to periodic levels: the period of each actor under periodic scheduling is replaced by its worst-case execution time. Then, STP retains some of the performance and flexibility of self-timed schedule, in which execution times of actors need only be estimates, and at the same time makes use of the fact that with a periodic schedule we can derive a tight estimation of the required performance metrics

Predictable mapping of streaming applications on multiprocessors

Het ontwerp van nieuwe consumentenelektronica wordt voortdurend complexer omdat er steeds meer functionaliteit in deze apparaten ge¨integreerd wordt. Een voorspelbaar ontwerptraject is nodig om deze complexiteit te beheersen. Het resultaat van dit ontwerptraject zou een systeem moeten zijn, waarin iedere applicatie zijn eigen taken binnen een strikte tijdslimiet kan uitvoeren, onafhankelijk van andere applicaties die hetzelfde systeem gebruiken. Dit vereist dat het tijdsgedrag van de hardware, de software, evenals hun interactie kan worden voorspeld. Er wordt vaak voorgesteld om een heterogeen multi-processor systeem (MPSoC) te gebruiken in moderne elektronische systemen. Een MP-SoC heeft voor veel applicaties een goede verhouding tussen rekenkracht en energiegebruik. Onchip netwerken (NoCs) worden voorgesteld als interconnect in deze systemen. Een NoC is schaalbaar en het biedt garanties wat betreft de hoeveelheid tijd die er nodig is om gegevens te communiceren tussen verschillende processoren en geheugens. Door het NoC te combineren met een voorspelbare strategie om de processoren en geheugens te delen, ontstaat een hardware platform met een voorspelbaar tijdsgedrag. Om een voorspelbaar systeem te verkrijgen moet ook het tijdsgedrag van een applicatie die wordt uitgevoerd op het platform voorspelbaar en analyseerbaar zijn. Het Synchronous Dataflow (SDF) model is erg geschikt voor het modelleren van applicaties die werken met gegevensstromen. Het model kan vele ontwerpbeslissingen modelleren en het is mogelijk om tijdens het ontwerptraject het tijdsgedrag van het systeem te analyseren. Dit proefschrift probeert om applicaties die gemodelleerd zijn met SDF grafen op een zodanige manier af te beelden op een NoC-gebaseerd MP-SoC, dat garanties op het tijdsgedrag van individuele applicaties gegeven kunnen worden. De doorstroomsnelheid van een applicatie is vaak een van de belangrijkste eisen bij het ontwerpen van systemen voor applicaties die werken met gegevensstromen. Deze doorstroomsnelheid wordt in hoge mate be¨invloed door de beschikbare ruimte om resultaten (gegevens) op te slaan. De opslagruimte in een SDF graaf wordt gemodelleerd door de pijlen in de graaf. Het probleem is dat er een vaste grootte voor de opslagruimte aan de pijlen van een SDF graaf moet worden toegewezen. Deze grootte moet zodanig worden gekozen dat de vereiste doorstroomsnelheid van het systeem gehaald wordt, terwijl de benodigde opslagruimte geminimaliseerd wordt. De eerste belangrijkste bijdrage van dit proefschrift is een techniek om de minimale opslagruimte voor iedere mogelijke doorstroomsnelheid van een applicatie te vinden. Ondanks de theoretische complexiteit van dit probleem presteert de techniek in praktijk goed. Doordat de techniek alle mogelijke minimale combinaties van opslagruimte en doorstroomsnelheid vindt, is het mogelijk om met situaties om te gaan waarin nog niet alle ontwerpbeslissingen zijn genomen. De ontwerpbeslissingen om twee taken van een applicatie op ´e´en processor uit te voeren, zou bijvoorbeeld de doorstroomsnelheid kunnen be¨invloeden. Hierdoor is er een onzekerheid in het begin van het ontwerptraject tussen de berekende doorstroomsnelheid en de doorstroomsnelheid die daadwerkelijk gerealiseerd kan worden als alle ontwerpbeslissingen zijn genomen. Tijdens het ontwerptraject moeten de taken waaruit een applicatie is opgebouwd toegewezen worden aan de verschillende processoren en geheugens in het systeem. Indien meerdere taken een processor delen, moet ook de volgorde bepaald worden waarin deze taken worden uitgevoerd. Een belangrijke bijdrage van dit proefschrift is een techniek die deze toewijzing uitvoert en die de volgorde bepaalt waarin taken worden uitgevoerd. Bestaande technieken kunnen alleen omgaan met taken die een ´e´en-op-´e´en relatie met elkaar hebben, dat wil zeggen, taken die een gelijk aantal keren uitgevoerd worden. In een SDF graaf kunnen ook complexere relaties worden uitgedrukt. Deze relaties kunnen omgeschreven worden naar een ´e´en-op-´e´en relatie, maar dat kan leiden tot een exponenti¨ele groei van het aantal taken in de graaf. Hierdoor kan het onmogelijk worden om in een beperkte tijd alle taken aan de processoren toe te wijzen en om de volgorde te bepalen waarin deze taken worden uitgevoerd. De techniek die in dit proefschrift wordt gepresenteerd, kan omgaan met de complexe relaties tussen taken in een SDF graaf zonder de vertaling naar de ´e´en-op-´e´en relaties te maken. Dit is mogelijk dankzij een nieuwe, effici¨ente techniek om de doorstroomsnelheid van SDF grafen te bepalen. Nadat de taken van een applicatie toegewezen zijn aan de processoren in het hardware platform moet de communicatie tussen deze taken op het NoC gepland worden. In deze planning moet voor ieder bericht dat tussen de taken wordt verstuurd, worden bepaald welke route er gebruikt wordt en wanneer de communicatie gestart wordt. Dit proefschrift introduceert drie strategie¨en voor het versturen van berichten met een strikte tijdslimiet. Alle drie de strategie¨en maken maximaal gebruik van de beschikbare vrijheid die moderne NoCs bieden. Experimenten tonen aan dat deze strategie¨en hierdoor effici¨enter omgaan met de beschikbare hardware dan bestaande strategie¨en. Naast deze strategie¨en wordt er een techniek gepresenteerd om uit de ontwerpbeslissingen die gemaakt zijn tijdens het toewijzen van taken aan de processoren alle tijdslimieten af te leiden waarbinnen de berichten over het NoC gecommuniceerd moeten worden. Deze techniek koppelt de eerder genoemde techniek voor het toewijzen van taken aan processoren aan de drie strategie¨en om berichten te versturen over het NoC. Tenslotte worden de verschillende technieken die in dit proefschrift worden ge¨introduceerd gecombineerd tot een compleet ontwerptraject. Het startpunt is een SDF graaf die een applicatie modelleert en een NoC-gebaseerd MP-SoC platform met een voorspelbaar tijdsgedrag. Het doel van het ontwerptraject is het op een zodanige manier afbeelden van de applicatie op het platform dat de doorstroomsnelheid van de applicatie gegarandeerd kan worden. Daarnaast probeert het ontwerptraject de hoeveelheid hardware die gebruikt wordt te minimaliseren. Er wordt een experiment gepresenteerd waarin drie verschillende multimedia applicaties (H.263 encoder/decoder en een MP3 decoder) op een NoCgebaseerd MP-SoC worden afgebeeld. Dit experiment toont aan dat de technieken die in dit proefschrift worden voorgesteld, gebruikt kunnen worden voor het ontwerpen van systemen met een voorspelbaar tijdsgedrag. Hiermee is het voorgestelde ontwerptraject het eerste traject dat een met een SDF-gemodelleerde applicatie op een NoC-gebaseerd MP-SoC kan afbeelden, terwijl er garanties worden gegeven over de doorstroomsnelheid van de applicatie

Exploring resource/performance trade-offs for streaming applications on embedded multiprocessors

Embedded system design is challenged by the gap between the ever-increasing customer demands and the limited resource budgets. The tough competition demands ever-shortening time-to-market and product lifecycles. To solve or, at least to alleviate, the aforementioned issues, designers and manufacturers need model-based quantitative analysis techniques for early design-space exploration to study trade-offs of different implementation candidates. Moreover, modern embedded applications, especially the streaming applications addressed in this thesis, face more and more dynamic input contents, and the platforms that they are running on are more flexible and allow runtime configuration. Quantitative analysis techniques for embedded system design have to be able to handle such dynamic adaptable systems. This thesis has the following contributions: - A resource-aware extension to the Synchronous Dataflow (SDF) model of computation. - Trade-off analysis techniques, both in the time-domain and in the iterationdomain (i.e., on an SDF iteration basis), with support for resource sharing. - Bottleneck-driven design-space exploration techniques for resource-aware SDF. - A game-theoretic approach to controller synthesis, guaranteeing performance under dynamic input. As a first contribution, we propose a new model, as an extension of static synchronous dataflow graphs (SDF) that allows the explicit modeling of resources with consistency checking. The model is called resource-aware SDF (RASDF). The extension enables us to investigate resource sharing and to explore different scheduling options (ways to allocate the resources to the different tasks) using state-space exploration techniques. Consistent SDF and RASDF graphs have the property that an execution occurs in so-called iterations. An iteration typically corresponds to the processing of a meaningful piece of data, and it returns the graph to its initial state. On multiprocessor platforms, iterations may be executed in a pipelined fashion, which makes performance analysis challenging. As the second contribution, this thesis develops trade-off analysis techniques for RASDF, both in the time-domain and in the iteration-domain (i.e., on an SDF iteration basis), to dimension resources on platforms. The time-domain analysis allows interleaving of different iterations, but the size of the explored state space grows quickly. The iteration-based technique trades the potential of interleaving of iterations for a compact size of the iteration state space. An efficient bottleneck-driven designspace exploration technique for streaming applications, the third main contribution in this thesis, is derived from analysis of the critical cycle of the state space, to reveal bottleneck resources that are limiting the throughput. All techniques are based on state-based exploration. They enable system designers to tailor their platform to the required applications, based on their own specific performance requirements. Pruning techniques for efficient exploration of the state space have been developed. Pareto dominance in terms of performance and resource usage is used for exact pruning, and approximation techniques are used for heuristic pruning. Finally, the thesis investigates dynamic scheduling techniques to respond to dynamic changes in input streams. The fourth contribution in this thesis is a game-theoretic approach to tackle controller synthesis to select the appropriate schedules in response to dynamic inputs from the environment. The approach transforms the explored iteration state space of a scenario- and resource-aware SDF (SARA SDF) graph to a bipartite game graph, and maps the controller synthesis problem to the problem of finding a winning positional strategy in a classical mean payoff game. A winning strategy of the game can be used to synthesize the controller of schedules for the system that is guaranteed to satisfy the throughput requirement given by the designer

Thermal-Aware Networked Many-Core Systems

Advancements in IC processing technology has led to the innovation and growth happening in the consumer electronics sector and the evolution of the IT infrastructure supporting this exponential growth. One of the most difficult obstacles to this growth is the removal of large amount of heatgenerated by the processing and communicating nodes on the system. The scaling down of technology and the increase in power density is posing a direct and consequential effect on the rise in temperature. This has resulted in the increase in cooling budgets, and affects both the life-time reliability and performance of the system. Hence, reducing on-chip temperatures has become a major design concern for modern microprocessors. This dissertation addresses the thermal challenges at different levels for both 2D planer and 3D stacked systems. It proposes a self-timed thermal monitoring strategy based on the liberal use of on-chip thermal sensors. This makes use of noise variation tolerant and leakage current based thermal sensing for monitoring purposes. In order to study thermal management issues from early design stages, accurate thermal modeling and analysis at design time is essential. In this regard, spatial temperature profile of the global Cu nanowire for on-chip interconnects has been analyzed. It presents a 3D thermal model of a multicore system in order to investigate the effects of hotspots and the placement of silicon die layers, on the thermal performance of a modern ip-chip package. For a 3D stacked system, the primary design goal is to maximise the performance within the given power and thermal envelopes. Hence, a thermally efficient routing strategy for 3D NoC-Bus hybrid architectures has been proposed to mitigate on-chip temperatures by herding most of the switching activity to the die which is closer to heat sink. Finally, an exploration of various thermal-aware placement approaches for both the 2D and 3D stacked systems has been presented. Various thermal models have been developed and thermal control metrics have been extracted. An efficient thermal-aware application mapping algorithm for a 2D NoC has been presented. It has been shown that the proposed mapping algorithm reduces the effective area reeling under high temperatures when compared to the state of the art.Siirretty Doriast

Predictable embedded multiprocessor architecture for streaming applications

The focus of this thesis is on embedded media systems that execute applications from the application domain car infotainment. These applications, which we refer to as jobs, typically fall in the class of streaming, i.e. they process on a stream of data. The jobs are executed on heterogeneous multiprocessor platforms, for performance and power efficiency reasons. Most of these jobs have firm real-time requirements, like throughput and end-to-end latency. Car-infotainment systems become increasingly more complex, due to an increase in the supported number of jobs and an increase of resource sharing. Therefore, it is hard to verify, for each job, that the realtime requirements are satisfied. To reduce the verification effort, we elaborate on an architecture for a predictable system from which we can verify, at design time, that the job’s throughput and end-to-end latency requirements are satisfied. This thesis introduces a network-based multiprocessor system that is predictable. This is achieved by starting with an architecture where processors have private local memories and execute tasks in a static order, so that the uncertainty in the temporal behaviour is minimised. As an interconnect, we use a network that supports guaranteed communication services so that it is guaranteed that data is delivered in time. The architecture is extended with shared local memories, run-time scheduling of tasks, and a memory hierarchy. Dataflow modelling and analysis techniques are used for verification, because they allow cyclic data dependencies that influence the job’s performance. Shown is how to construct a dataflow model from a job that is mapped onto our predictable multiprocessor platforms. This dataflow model takes into account: computation of tasks, communication between tasks, buffer capacities, and scheduling of shared resources. The job’s throughput and end-to-end latency bounds are derived from a self-timed execution of the dataflow graph, by making use of existing dataflow-analysis techniques. It is shown that the derived bounds are tight, e.g. for our channel equaliser job, the accuracy of the derived throughput bound is within 10.1%. Furthermore, it is shown that the dataflow modelling and analysis techniques can be used despite the use of shared memories, run-time scheduling of tasks, and caches

Kahn Process Networks and a Reactive Extension

Kahn and MacQueen have introduced a generic class of determinate asynchronous data-flow applications, called Kahn Process Networks (KPNs) with an elegant mathematical model and semantics in terms of Scott-continuous functions on data streams together with an implementation model of independent asynchronous sequential programs communicating through FIFO buffers with blocking read and non-blocking write operations. The two are related by the Kahn Principle which states that a realization according to the implementation model behaves as predicted by the mathematical function. Additional steps are required to arrive at an actual implementation of a KPN to take care of scheduling of independent processes on a single processor and to manage communication buffers. Because of the expressiveness of the KPN model, buffer sizes and schedules cannot be determined at design time in general and require dynamic run-time system support. Constraints are discussed that need to be placed on such system support so as to maintain the Kahn Principle.We then discuss a possible extension of the KPN model to include the possibility for sporadic, reactive behavior which is not possible in the standard model. The extended model is called Reactive Process Networks. We introduce its semantics, look at analyzability and at more constrained data-flow models combined with reactive behavior

Embedded System Design

A unique feature of this open access textbook is to provide a comprehensive introduction to the fundamental knowledge in embedded systems, with applications in cyber-physical systems and the Internet of things. It starts with an introduction to the field and a survey of specification models and languages for embedded and cyber-physical systems. It provides a brief overview of hardware devices used for such systems and presents the essentials of system software for embedded systems, including real-time operating systems. The author also discusses evaluation and validation techniques for embedded systems and provides an overview of techniques for mapping applications to execution platforms, including multi-core platforms. Embedded systems have to operate under tight constraints and, hence, the book also contains a selected set of optimization techniques, including software optimization techniques. The book closes with a brief survey on testing. This fourth edition has been updated and revised to reflect new trends and technologies, such as the importance of cyber-physical systems (CPS) and the Internet of things (IoT), the evolution of single-core processors to multi-core processors, and the increased importance of energy efficiency and thermal issues