Shared versus distributed memory multiprocessors

The question of whether multiprocessors should have shared or distributed memory has attracted a great deal of attention. Some researchers argue strongly for building distributed memory machines, while others argue just as strongly for programming shared memory multiprocessors. A great deal of research is underway on both types of parallel systems. Special emphasis is placed on systems with a very large number of processors for computation intensive tasks and considers research and implementation trends. It appears that the two types of systems will likely converge to a common form for large scale multiprocessors

OutFlank Routing: Increasing Throughput in Toroidal Interconnection Networks

We present a new, deadlock-free, routing scheme for toroidal interconnection networks, called OutFlank Routing (OFR). OFR is an adaptive strategy which exploits non-minimal links, both in the source and in the destination nodes. When minimal links are congested, OFR deroutes packets to carefully chosen intermediate destinations, in order to obtain travel paths which are only an additive constant longer than the shortest ones. Since routing performance is very sensitive to changes in the traffic model or in the router parameters, an accurate discrete-event simulator of the toroidal network has been developed to empirically validate OFR, by comparing it against other relevant routing strategies, over a range of typical real-world traffic patterns. On the 16x16x16 (4096 nodes) simulated network OFR exhibits improvements of the maximum sustained throughput between 14% and 114%, with respect to Adaptive Bubble Routing.Comment: 9 pages, 5 figures, to be presented at ICPADS 201

The Effect Of Hot Spots On The Performance Of Mesh--Based Networks

Direct network performance is affected by different design parameters which include number of virtual channels, number of ports, routing algorithm, switching technique, deadlock handling technique, packet size, and buffer size. Another factor that affects network performance is the traffic pattern. In this thesis, we study the effect of hotspot traffic on system performance. Specifically, we study the effect of hotspot factor, hotspot number, and hot spot location on the performance of mesh-based networks. Simulations are run on two network topologies, both the mesh and torus. We pay more attention to meshes because they are widely used in commercial machines. Comparisons between oblivious wormhole switching and chaotic packet switching are reported. Overall packet switching proved to be more efficient in terms of throughput when compared to wormhole switching. In the case of uniform random traffic, it is shown that the differences between chaotic and oblivious routing are indistinguishable. Networks with low number of hotspots show better performance. As the number of hotspots increases network latency tends to increase. It is shown that when the hotspot factor increases, performance of packet switching is better than that of wormhole switching. It is also shown that the location of hotspots affects network performance particularly with the oblivious routers since their achieved latencies proved to be more vulnerable to changes in the hotspot location. It is also shown that the smaller the size of the network the earlier network saturation occurs. Further, it is shown that the chaos router’s adaptivity is useful in this case. Finally, for tori, performance is not greatly affected by hotspot presence. This is mostly due to the symmetric nature of tori

Implementing FFT-based digital channelized receivers on FPGA platforms

This paper presents an in-depth study of the implementation and characterization of fast Fourier transform (FFT) pipelined architectures suitable for broadband digital channelized receivers. When implementing the FFT algorithm on field-programmable gate array (FPGA) platforms, the primary goal is to maximize throughput and minimize area. Feedback and feedforward architectures have been analyzed regarding key design parameters: radix, bitwidth, number of points and stage scaling. Moreover, a simplification of the FFT algorithm, the monobit FFT, has been implemented in order to achieve faster real time performance in broadband digital receivers. The influence of the hardware implementation on the performance of digital channelized receivers has been analyzed in depth, revealing interesting implementation trade-offs which should be taken into account when designing this kind of signal processing systems on FPGA platforms

Techniques for Aging, Soft Errors and Temperature to Increase the Reliability of Embedded On-Chip Systems

This thesis investigates the challenge of providing an abstracted, yet sufficiently accurate reliability estimation for embedded on-chip systems. In addition, it also proposes new techniques to increase the reliability of register files within processors against aging effects and soft errors. It also introduces a novel thermal measurement setup that perspicuously captures the infrared images of modern multi-core processors

A Novel variation-tolerant 9T SRAM design for nanoscale CMOS

As the feature sizes decrease, understanding manufacturing variations becomes essential to effectively design robust circuits. Manufacturing variations occur when process parameters deviate from their ideal or expected values, resulting in variations in device characteristics. Variations in the device characteristics cause the circuit to deviate from its expected behavior resulting in circuit instability, performance degradation, and yield loss. Both from an economic and performance standpoint, the yield and performance of Static Random Access Memories (SRAMs) are of great importance to the modern System-on-Chip designs. SRAM bitcells typically employ well-matched, minimum-sized transistors which make them highly sensitive to process variations. To overcome these challenges, researchers have proposed different topologies for SRAMs with 8T and 10T SRAM designs. These designs improve the cell stability but suffer from bitline-leakage noise, placing constraints on the number of cells shared by each bitline. These designs also have substantial area overhead when compared to the traditional 6T design. In this work, the published SRAM designs are characterized using commercial CMOS 65 nm models and are compared based on critical SRAM parameters like read stability, write stability, bitline leakage and the impact of process variations. Furthermore, a single-ended 9T SRAM design is proposed that enhances data stability and simultaneously addresses the bitline leakage problem. The proposed design also satisfies the yield criterion to achieve 90% yield for a 1Mb SRAM array in the presence of process variations

Performance Implications of Synchronization Support for Parallel FORTRAN Programs

Coordinated Science Laboratory was formerly known as Control Systems LaboratoryJoint Services Electronics Program / N00014-90-J-1270National Science Foundation / MIP-8809478National Aeronautics and Space Administration / NASA NAG 1-613NCRAMD 29K Advanced Processor Development Divisio

High Performance and Power Efficient On-Chip Network Designs through Multiple Injection Ports

Las redes dentro de un chip se están convirtiendo en el elemento principal de los sistemas multiprocesador. A medida que aumenta la escala de integración, más elementos de cómputo (procesadores) se incluyen en el mismo chip. Estos componentes se interconectan con una red dentro del chip que debe ofrecer latencias de transmisión ultra bajas (orden de nanosegundos) y anchos de banda elevados. El diseño, pues, de una red eficiente dentro del chip juega un papel fundamental. En la presente tesis se analizan diferentes alternativas de diseño de las redes en el chip. En particular, se hace uso de la posibilidad de utilizar diferentes puertos de inyección desde los procesadores con el fin de obtener diferentes mejoras. En primer lugar, las prestaciones aumentan al tener procesadores con distintas alternativas de inyección de tráfico. En segundo lugar, además aumenta la tolerancia a fallos frente a defectos de fabricación (mas importantes conforme avanza la tecnología). Y en tercer lugar, permite una política de apagado de componentes más agresiva que nos permita un ahorro significativo de energía. Hemos evaluado diferentes topologías derivadas del mecanismo de inyección en términos de prestaciones, coste de implementación, y ahorro de consumo. Además, hemos desarrollado simuladores específicos para las distintas técnicas utilizadas. Cada topología diseñada supone una mejora respecto a la anterior, y por supuesto, teniendo en cuenta las topologías existentes. En resumen, nuestro esfuerzo se centra en conseguir un excelente compromiso entre prestaciones, consumo y tolerancia a fallos dentro de una red en chip. Para la primera propuesta (topología NR-Mesh), se alcanzan mejoras en prestaciones de un 7\% y hasta de un 75\% en reducción de consumo de media, comparado con la malla 2D o malla de 2 dimensiones. Para la siguiente propuesta, la malla concentrada paralela (PC-Mesh), el beneficio en prestaciones que se obtiene es de hasta un 20\%, así cómo de un 60\% en reducción deCamacho Villanueva, J. (2012). High Performance and Power Efficient On-Chip Network Designs through Multiple Injection Ports [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/18235Palanci