Improving Performance Isolation on Chip Multiprocessors via an Operating System Scheduler

We describe a new operating system scheduling algorithm that improves performance isolation on chip multiprocessors (CMP). Poor performance isolation occurs when an application’s performance is determined by the behaviour of its co-runners, i.e., other applications simultaneously running with it. This performance dependency is caused by unfair, corunner-dependent cache allocation on CMPs. Poor performance isolation interferes with the operating system’s control over priority enforcement and hinders QoS provisioning. Previous solutions required modifications to the hardware. We present a new software solution. Our cache-fair algorithm ensures that the application runs as quickly as it would under fair cache allocation, regardless of how the cache is actually allocated. If the thread executes fewer instructions per cycle than it would under fair cache allocation, the scheduler increases that thread’s CPU timeslice. This way, the thread’s overall performance does not suffer because it is allowed to use the CPU longer. We describe our implementation of the algorithm in Solaris™ 10, and show that it significantly improves performance isolation for SPEC CPU, SPEC JBB and TPC-C.Engineering and Applied Science

Improving Performance Isolation on Chip Multiprocessors via an Operating System Scheduler

(Article begins on next page) The Harvard community has made this article openly available. Please share how this access benefits you. Your story matters. Citation Feorova, Alexandra, Margo Seltzer, and Michael D. Smith. 2007.Improving performance isolation on chip multiprocessors via an operating system scheduler. In Proceedings of the 16t

An input centric paradigm for program dynamic optimizations and lifetime evolvement

Accurately predicting program behaviors (e.g., memory locality, method calling frequency) is fundamental for program optimizations and runtime adaptations. Despite decades of remarkable progress, prior studies have not systematically exploited the use of program inputs, a deciding factor of program behaviors, to help in program dynamic optimizations. Triggered by the strong and predictive correlations between program inputs and program behaviors that recent studies have uncovered, the dissertation work aims to bring program inputs into the focus of program behavior analysis and program dynamic optimization, cultivating a new paradigm named input-centric program behavior analysis and dynamic optimization.;The new optimization paradigm consists of three components, forming a three-layer pyramid. at the base is program input characterization, a component for resolving the complexity in program raw inputs and extracting important features. In the middle is input-behavior modeling, a component for recognizing and modeling the correlations between characterized input features and program behaviors. These two components constitute input-centric program behavior analysis, which (ideally) is able to predict the large-scope behaviors of a program\u27s execution as soon as the execution starts. The top layer is input-centric adaptation, which capitalizes on the novel opportunities created by the first two components to facilitate proactive adaptation for program optimizations.;This dissertation aims to develop this paradigm in two stages. In the first stage, we concentrate on exploring the implications of program inputs for program behaviors and dynamic optimization. We construct the basic input-centric optimization framework based on of line training to realize the basic functionalities of the three major components of the paradigm. For the second stage, we focus on making the paradigm practical by addressing multi-facet issues in handling input complexities, transparent training data collection, predictive model evolvement across production runs. The techniques proposed in this stage together cultivate a lifelong continuous optimization scheme with cross-input adaptivity.;Fundamentally the new optimization paradigm provides a brand new solution for program dynamic optimization. The techniques proposed in the dissertation together resolve the adaptivity-proactivity dilemma that has been limiting the effectiveness of existing optimization techniques. its benefits are demonstrated through proactive dynamic optimizations in Jikes RVM and version selection using IBM XL C Compiler, yielding significant performance improvement on a set of Java and C/C++ programs. It may open new opportunities for a broad range of runtime optimizations and adaptations. The evaluation results on both Java and C/C++ applications demonstrate the new paradigm is promising in advancing the current state of program optimizations

ADAPTIVE POWER MANAGEMENT FOR COMPUTERS AND MOBILE DEVICES

Power consumption has become a major concern in the design of computing systems today. High power consumption increases cooling cost, degrades the system reliability and also reduces the battery life in portable devices. Modern computing/communication devices support multiple power modes which enable power and performance tradeoff. Dynamic power management (DPM), dynamic voltage and frequency scaling (DVFS), and dynamic task migration for workload consolidation are system level power reduction techniques widely used during runtime. In the first part of the dissertation, we concentrate on the dynamic power management of the personal computer and server platform where the DPM, DVFS and task migrations techniques are proved to be highly effective. A hierarchical energy management framework is assumed, where task migration is applied at the upper level to improve server utilization and energy efficiency, and DPM/DVFS is applied at the lower level to manage the power mode of individual processor. This work focuses on estimating the performance impact of workload consolidation and searching for optimal DPM/DVFS that adapts to the changing workload. Machine learning based modeling and reinforcement learning based policy optimization techniques are investigated. Mobile computing has been weaved into everyday lives to a great extend in recent years. Compared to traditional personal computer and server environment, the mobile computing environment is obviously more context-rich and the usage of mobile computing device is clearly imprinted with user\u27s personal signature. The ability to learn such signature enables immense potential in workload prediction and energy or battery life management. In the second part of the dissertation, we present two mobile device power management techniques which take advantage of the context-rich characteristics of mobile platform and make adaptive energy management decisions based on different user behavior. We firstly investigate the user battery usage behavior modeling and apply the model directly for battery energy management. The first technique aims at maximizing the quality of service (QoS) while keeping the risk of battery depletion below a given threshold. The second technique is an user-aware streaming strategies for energy efficient smartphone video playback applications (e.g. YouTube) that minimizes the sleep and wake penalty of cellular module and at the same time avoid the energy waste from excessive downloading. Runtime power and thermal management has attracted substantial interests in multi-core distributed embedded systems. Fast performance evaluation is an essential step in the research of distributed power and thermal management. In last part of the dissertation, we present an FPGA based emulator of multi-core distributed embedded system designed to support the research in runtime power/thermal management. Hardware and software supports are provided to carry out basic power/thermal management actions including inter-core or inter-FPGA communications, runtime temperature monitoring and dynamic frequency scaling

Locality Enhancement and Dynamic Optimizations on Multi-Core and GPU

Enhancing the match between software executions and hardware features is key to computing efficiency. The match is a continuously evolving and challenging problem. This dissertation focuses on the development of programming system support for exploiting two key features of modern hardware development: the massive parallelism of emerging computational accelerators such as Graphic Processing Units (GPU), and the non-uniformity of cache sharing in modern multicore processors. They are respectively driven by the important role of accelerators in today\u27s general-purpose computing and the ultimate importance of memory performance. This dissertation particularly concentrates on optimizing control flows and memory references, at both compilation and execution time, to tap into the full potential of pure software solutions in taking advantage of the two key hardware features.;Conditional branches cause divergences in program control flows, which may result in serious performance degradation on massively data-parallel GPU architectures with Single Instruction Multiple Data (SIMD) parallelism. On such an architecture, control divergence may force computing units to stay idle for a substantial time, throttling system throughput by orders of magnitude. This dissertation provides an extensive exploration of the solution to this problem and presents program level transformations based upon two fundamental techniques --- thread relocation and data relocation. These two optimizations provide fundamental support for swapping jobs among threads so that the control flow paths of threads converge within every SIMD thread group.;In memory performance, this dissertation concentrates on two aspects: the influence of nonuniform sharing on multithreading applications, and the optimization of irregular memory references on GPUs. In shared cache multicore chips, interactions among threads are complicated due to the interplay of cache contention and synergistic prefetching. This dissertation presents the first systematic study on the influence of non-uniform shared cache on contemporary parallel programs, reveals the mismatch between the software development and underlying cache sharing hierarchies, and further demonstrates it by proposing and applying cache-sharing-aware data transformations that bring significant performance improvement. For the second aspect, the efficiency of GPU accelerators is sensitive to irregular memory references, which refer to the memory references whose access patterns remain unknown until execution time (e.g., A[P[i]]). The root causes of the irregular memory reference problem are similar to that of the control flow problem, while in a more general and complex form. I developed a framework, named G-Streamline, as a unified software solution to dynamic irregularities in GPU computing. It treats both types of irregularities at the same time in a holistic fashion, maximizing the whole-program performance by resolving conflicts among optimizations

Architectures multi-flots simultanés pour le temps-réel strict

Dans les systèmes critiques, les applications doivent satisfaire des contraintes temporelles strictes, chaque tâche devant s'exécuter en un temps maximum prédéfini ; le non-respect d'une seule échéance peut compromettre toute la stabilité du système et engendrer des effets désastreux. Un tel système est appelé système temps-réel strict. Pour pouvoir assigner une échéance à une tâche, il faut être capable de déterminer le temps maximum que mettra cette tâche à s'exécuter, ceci indépendamment des données en entrée de la tâche. Ce temps maximum recherché s'appelle le WCET (Worst Case Execution Time, temps d'exécution pire cas), il est souvent déterminé à l'issue d'un processus de calcul nécessitant une modélisation des structures de l'architecture du processeur. Les mécanismes architecturaux qui augmentent les performances d'un processeur (prédiction de branchement, cache) induisent souvent un fort taux d'indéterminisme qui rend la modélisation difficile. C'est pourquoi il est souvent préférable d'utiliser des architectures relativement simples pour un système temps-réel strict, ou de simplifier des architectures hautes performances récentes. Notre optique est plutôt d'essayer d'adapter, par de légères modifications, une de ces architectures performantes mais peu prédictibles pour un respect de contraintes temps-réel strict et un calcul de WCET facilité. L'architecture que nous choisissons est l'architecture Multi-Flots Simultanés (Simultaneous Multihtreading, SMT), ou plusieurs programmes peuvent s'exécuter simultanément en partageant les ressources d'un seul cœur d'exécution.In critical systems, applications must satisfy hard timing constraints, each task must execute in a maximum predefinite time. Any unrespected constraint may compromise the stability of the whole system and generate disastrous effects. Such a system is called hard real-time system. To be able to assign a constraint to a task, you must be able to determinate the maximum time this task will execute, independently from the input data of the task. This maximum time you search is called the WCET (Worst Case Execution Time), it is obtained by a calculation process where we need to modelise the structures of the processor architecture. The architecture mechanisms increasing performance (caches, branch prediction) are often a lot undeterministic and thus are difficult to modelise. That's why we usually prefer using relatively simple architectures for a hard real-time system, or simplifying recent high-performance architecture. In this work, we will rather adapt, using small modifications, one of those high-performance but little predictible architecture to respect hard timing constraints and make simpler WCET calculation. We choose the Simultaneous Multithreading architecture where several programs can run at the same time sharing the resources of one core only

高エネルギ効率マイクロプロセッサのためのハードウェア・ソフトウェア協調型キャッシュメモリシステムに関する研究

Tohoku University小林広明課

CPU accounting in multi-threaded processors

In recent years, multi-threaded processors have become more and more popular in industry in order to increase the system aggregated performance and per-application performance, overcoming the limitations imposed by the limited instruction-level parallelism, and by power and thermal constraints. Multi-threaded processors are widely used in servers, desktop computers, lap-tops, and mobile devices. However, multi-threaded processors introduce complexities when accounting CPU (computation) capacity (CPU accounting), since the CPU capacity accounted to an application not only depends upon the time that the application is scheduled onto a CPU, but also on the amount of hardware resources it receives during that period. And given that in a multi-threaded processor hardware resources are dynamically shared between applications, the CPU capacity accounted to an application in a multi-threaded processor depends upon the workload in which it executes. This is inconvenient because the CPU accounting of the same application with the same input data set may be accounted significantly different depending upon the workload in which it executes. Deploying systems with accurate CPU accounting mechanisms is necessary to increase fairness among running applications. Moreover, it will allow users to be fairly charged on a shared data center, facilitating server consolidation in future systems. This Thesis analyses the concepts of CPU capacity and CPU accounting for multi-threaded processors. In this study, we demonstrate that current CPU accounting mechanisms are not as accurate as they should be in multi-threaded processors. For this reason, we present two novel CPU accounting mechanisms that improve the accuracy in measuring the CPU capacity for multi-threaded processors with low hardware overhead. We focus our attention on several current multi-threaded processors, including chip multiprocessors and simultaneous multithreading processors. Finally, we analyse the impact of shared resources in multi-threaded processors in operating system CPU scheduler and we propose several schedulers that improve the knowledge of shared hardware resources at the software level

Runahead threads

Los temas de investigación sobre multithreading han ganado mucho interés en la arquitectura de computadores con la aparición de procesadores multihilo y multinucleo. Los procesadores SMT (Simultaneous Multithreading) son uno de estos nuevos paradigmas, combinando la capacidad de emisión de múltiples instrucciones de los procesadores superscalares con la habilidad de explotar el paralelismo a nivel de hilos (TLP). Así, la principal característica de los procesadores SMT es ejecutar varios hilos al mismo tiempo para incrementar la utilización de las etapas del procesador mediante la compartición de recursos.Los recursos compartidos son el factor clave de los procesadores SMT, ya que esta característica conlleva tratar con importantes cuestiones pues los hilos también compiten por estos recursos en el núcleo del procesador. Si bien distintos grupos de aplicaciones se benefician de disponer de SMT, las diferentes propiedades de los hilos ejecutados pueden desbalancear la asignación de recursos entre los mismos, disminuyendo los beneficios de la ejecución multihilo. Por otro lado, el problema con la memoria está aún presente en los procesadores SMT. Estos procesadores alivian algunos de los problemas de latencia provocados por la lentitud de la memoria con respecto a la CPU. Sin embargo, hilos con grandes cargas de trabajo y con altas tasas de fallos en las caches son unas de las mayores dificultades de los procesadores SMT. Estos hilos intensivos en memoria tienden a crear importantes problemas por la contención de recursos. Por ejemplo, pueden llegar a bloquear recursos críticos debido a operaciones de larga latencia impidiendo no solo su ejecución, sino el progreso de la ejecución de los otros hilos y, por tanto, degradando el rendimiento general del sistema.El principal objetivo de esta tesis es aportar soluciones novedosas a estos problemas y que mejoren el rendimiento de los procesadores SMT. Para conseguirlo, proponemos los Runahead Threads (RaT) aplicando una ejecución especulativa basada en runahead. RaT es un mecanismo alternativo a las políticas previas de gestión de recursos las cuales usualmente restringían a los hilos intensivos en memoria para conseguir más productividad.La idea clave de RaT es transformar un hilo intensivo en memoria en un hilo ligero en el uso de recursos que progrese especulativamente. Así, cuando un hilo sufre de un acceso de larga latencia, RaT transforma dicho hilo en un hilo de runahead mientras dicho fallo está pendiente. Los principales beneficios de esta simple acción son varios. Mientras un hilo está en runahead, éste usa los diferentes recursos compartidos sin monopolizarlos o limitarlos con respecto a los otros hilos. Al mismo tiempo, esta ejecución especulativa realiza prebúsquedas a memoria que se solapan con el fallo principal, por tanto explotando el paralelismo a nivel de memoria y mejorando el rendimiento.RaT añade muy poco hardware extra y complejidad en los procesadores SMT con respecto a su implementación. A través de un mecanismo de checkpoint y lógica de control adicional, podemos dotar a los contextos hardware con la capacidad de ejecución en runahead. Por medio de RaT, contribuímos a aliviar simultaneamente dos problemas en el contexto de los procesadores SMT. Primero, RaT reduce el problema de los accesos de larga latencia en los SMT mediante el paralelismo a nivel de memoria (MLP). Un hilo prebusca datos en paralelo en vez de estar parado debido a un fallo de L2 mejorando su rendimiento individual. Segundo, RaT evita que los hilos bloqueen recursos bajo fallos de larga latencia. RaT asegura que el hilo intensivo en memoria recicle más rápido los recursos compartidos que usa debido a la naturaleza de la ejecución especulativa.La principal limitación de RaT es que los hilos especulativos pueden ejecutar instrucciones extras cuando no realizan prebúsqueda e innecesariamente consumir recursos de ejecución en el procesador SMT. Este inconveniente resulta en hilos de runahead ineficientes pues no contribuyen a la ganancia de rendimiento e incrementan el consumo de energía debido al número extra de instrucciones especulativas. Por consiguiente, en esta tesis también estudiamos diferentes soluciones dirigidas a solventar esta desventaja del mecanismo RaT. El resultado es un conjunto de soluciones complementarias para mejorar la eficiencia de RaT en términos de consumo de potencia y gasto energético.Por un lado, mejoramos la eficiencia de RaT aplicando ciertas técnicas basadas en el análisis semántico del código ejecutado por los hilos en runahead. Proponemos diferentes técnicas que analizan y controlan la utilidad de ciertos patrones de código durante la ejecución en runahead. Por medio de un análisis dinámico, los hilos en runahead supervisan la utilidad de ejecutar los bucles y subrutinas dependiendo de las oportunidades de prebúsqueda. Así, RaT decide cual de estas estructuras de programa ejecutar dependiendo de la información de utilidad obtenida, decidiendo entre parar o saltar el bucle o la subrutina para reducir el número de las instrucciones no útiles. Entre las técnicas propuestas, conseguimos reducir las instrucciones especulativas y la energía gastada mientras obtenemos rendimientos similares a la técnica RaT original.Por otro lado, también proponemos lo que denominamos hilos de runahead eficientes. Esta propuesta se basa en una técnica más fina que cubre todo el rango de ejecución en runahead, independientemente de las características del programa ejecutado. La idea principal es averiguar "cuando" y "durante cuanto" un hilo en runahead debe ser ejecutado prediciendo lo que denominamos distancia útil de runahead. Los resultados muestran que la mejor de estas propuestas basadas en la predicción de la distancia de runahead reducen significativamente el número de instrucciones extras así como también el consumo de potencia. Asimismo, conseguimos mantener los beneficios de rendimiento de los hilos en runahead, mejorando de esta forma la eficiencia energética de los procesadores SMT usando el mecanismo RaT.La evolución de RaT desarrollada durante toda esta investigación nos proporciona no sólo una propuesta orientada a un mayor rendimiento sino también una forma eficiente de usar los recursos compartidos en los procesadores SMT en presencia de operaciones de memoria de larga latencia.Dado que los diseños SMT en el futuro estarán orientados a optimizar una combinación de rendimiento individual en las aplicaciones, la productividad y el consumo de energía, los mecanismos basados en RaT aquí propuestos son interesantes opciones que proporcionan un mejor balance de rendimiento y energía que las propuestas previas en esta área.Research on multithreading topics has gained a lot of interest in the computer architecture community due to new commercial multithreaded and multicore processors. Simultaneous Multithreading (SMT) is one of these relatively new paradigms, which combines the multiple instruction issue features of superscalar processors with the ability of multithreaded architectures to exploit thread level parallelism (TLP). The main feature of SMT processors is to execute multiple threads that increase the utilization of the pipeline by sharing many more resources than in other types of processors.Shared resources are the key of simultaneous multithreading, what makes the technique worthwhile.This feature also entails important challenges to deal with because threads also compete for resources in the processor core. On the one hand, although certain types and mixes of applications truly benefit from SMT, the different features of threads can unbalance the resource allocation among threads, diminishing the benefit of multithreaded execution. On the other hand, the memory wall problem is still present in these processors. SMT processors alleviate some of the latency problems arisen by main memory's slowness relative to the CPUs. Nevertheless, threads with high cache miss rates that use large working sets are one of the major pitfalls of SMT processors. These memory intensive threads tend to use processor and memory resources poorly creating the highest resource contention problems. Memory intensive threads can clog up shared resources due to long latency memory operations without making progress on a SMT processor, thereby hindering overall system performance.The main goal of this thesis is to alleviate these shortcomings on SMT scenarios. To accomplish this, the key contribution of this thesis is the application of the paradigm of Runahead execution in the design of multithreaded processors by Runahead Threads (RaT). RaT shows to be a promising alternative to prior SMT resource management mechanisms which usually restrict memory bound threads in order to get higher throughputs.The idea of RaT is to transform a memory intensive thread into a light-consumer resource thread by allowing that thread to progress speculatively. Therefore, as soon as a thread undergoes a long latency load, RaT transforms the thread to a runahead thread while it has that long latency miss outstanding. The main benefits of this simple action performed by RaT are twofold. While being a runahead thread, this thread uses the different shared resources without monopolizing or limiting the available resources for other threads. At the same time, this fast speculative thread issues prefetches that overlap other memory accesses with the main miss, thereby exploiting the memory level parallelism.Regarding implementation issues, RaT adds very little extra hardware cost and complexity to an existing SMT processor. Through a simple checkpoint mechanism and little additional control logic, we can equip the hardware contexts with the runahead thread capability. Therefore, by means of runahead threads, we contribute to alleviate simultaneously the two shortcomings in the context of SMT processor improving the performance. First, RaT alleviates the long latency load problem on SMT processors by exposing memory level parallelism (MLP). A thread prefetches data in parallel (if MLP is available) improving its individual performance rather than be stalled on an L2 miss. Second, RaT prevents threads from clogging resources on long latency loads. RaT ensures that the L2-missing thread recycles faster the shared resources it uses by the nature of runahead speculative execution. This avoids memory intensive threads clogging the important processor resources up.The main limitation of RaT though is that runahead threads can execute useless instructions and unnecessarily consume execution resources on the SMT processor when there is no prefetching to be exploited. This drawback results in inefficient runahead threads which do not contribute to the performance gain and increase dynamic energy consumption due to the number of extra speculatively executed instructions. Therefore, we also propose different solutions aimed at this major disadvantage of the Runahead Threads mechanism. The result of the research on this line is a set of complementary solutions to enhance RaT in terms of power consumption and energy efficiency.On the one hand, code semantic-aware Runahead threads improve the efficiency of RaT using coarse-grain code semantic analysis at runtime. We provide different techniques that analyze the usefulness of certain code patterns during runahead thread execution. The code patterns selected to perform that analysis are loops and subroutines. By means of the proposed coarse grain analysis, runahead threads oversee the usefulness of loops or subroutines depending on the prefetches opportunities during their executions. Thus, runahead threads decide which of these particular program structures execute depending on the obtained usefulness information, deciding either stall or skip the loop or subroutine executions to reduce the number of useless runahead instructions. Some of the proposed techniques reduce the speculative instruction and wasted energy while achieving similar performance to RaT.On the other hand, the efficient Runahead thread proposal is another contribution focused on improving RaT efficiency. This approach is based on a generic technique which covers all runahead thread executions, independently of the executed program characteristics as code semantic-aware runahead threads are. The key idea behind this new scheme is to find out --when' and --how long' a thread should be executed in runahead mode by predicting the useful runahead distance. The results show that the best of these approaches based on the runahead distance prediction significantly reduces the number of extra speculative instructions executed in runahead threads, as well as the power consumption. Likewise, it maintains the performance benefits of the runahead threads, thereby improving the energy-efficiency of SMT processors using the RaT mechanism.The evolution of Runahead Threads developed in this research provides not only a high performance but also an efficient way of using shared resources in SMT processors in the presence of long latency memory operations. As designers of future SMT systems will be increasingly required to optimize for a combination of single thread performance, total throughput, and energy consumption, RaT-based mechanisms are promising options that provide better performance and energy balance than previous proposals in the field