498 research outputs found

    사람 근골격 특성을 반영한 로봇 손가락 설계

    Get PDF
    학위논문(박사) -- 서울대학교대학원 : 융합과학기술대학원 융합과학부(지능형융합시스템전공), 2023. 2. 박재흥.What the manipulator can perform is determined by what the end-effectors, including the robotic hand, can do because it is the gateway that directly interacts with the surrounding environment or objects. In order for robots to have human-level task performance in a human-centered environment, the robotic hand with human-hand-level capabilities is essential. Here, the human-hand-level capabilities include not only force-speed, and dexterity, but also size and weight. However, to our knowledge, no robotic hand exists that simultaneously realizes the weight, size, force, and dexterity of the human hand and continues to remain a challenge. In this thesis, to improve the performance of the robotic hand, the modular robotic finger design with three novel mechanisms based on the musculoskeletal characteristics of the human hand was proposed. First, the tendon-driven robotic finger with intrinsic/extrinsic actuator arrangement like the muscle arrangement of the human hand was proposed and analyzed. The robotic finger consists of five different tendons and ligaments. By analyzing the fingertip speed while a human is performing various object grasping motions, the actuators of the robotic finger were separated into intrinsic actuators responsible for slow motion and an extrinsic actuator that performs the motions requiring both large force and high speed. Second, elastomeric continuously variable transmission (ElaCVT), a new concept relating to continuously variable transmission (CVT), was designed to improve the performance of the electric motors remaining weight and size and applied as an extrinsic actuator of the robotic finger. The primary purpose of ElaCVT is to expand the operating region of a twisted string actuator (TSA) and duplicate the force-velocity curve of the muscles by passively changing the reduction ratio according to the external load applied to the end of the TSA. A combination of ElaCVT and TSA (ElaCVT-TSA) is proposed as a linear actuator. With ElaCVT-TSA, an expansion of the operating region of electric motors to the operating region of the muscles was experimentally demonstrated. Finally, as the flexion/extension joints of the robotic finger, anthropomorphic rolling contact joint, which mimicked the structures of the human finger joint like tongue-and-groove, and collateral ligaments, was proposed. As compliant joints not only compensate for the lack of actuated degrees of freedom of an under-actuated system and improve grasp stability but also prevent system failure from unexpected contacts, various types of compliant joints have been applied to end-effectors. Although joint compliance increases the success rate of power grasping, when the finger wraps around large objects, it can reduce the grasping success rate in pinch gripping when dealing with small objects using the fingertips. To overcome this drawback, anthropomorphic rolling contact joint is designed to passively adjust the torsional stiffness according to the joint angle without additional weight and space. With the anthropomorphic rolling contact joint, the stability of pinch grasping improved.엔드이팩터는 로봇과 주변 환경이 상호작용하는 통로로 매니퓰레이터가 수행할 수 있는 작업은 엔드이펙터의 성능에 제한된다. 사람 중심의 환경에 로봇이 적용되어 사람 수준의 다양한 작업을 수행하기 위해서는 사람 손 수준의 성능을 갖는 로봇 손이 필수적이며 사람 손 수준의 성능은 단순히 힘-속도, 자유도만을 포함하는 것이 아닌 크기와 무게 그리고 물체 조작에 도움을 주는 여러 손 특성도 포함한다. 그러나 현재까지 사람 손 수준의 무게, 크기, 힘 그리고 자유도를 모두 만족시키는 로봇 손은 개발되지 않았으며 여전히 도전적인 과제로 남아있다. 본 논문에서는 로봇 손가락의 성능을 향상하기 위하여 사람의 근골격 특성을 반영한 세 가지의 새로운 메커니즘을 제안하고 이를 통합한 모듈형 로봇 손가락 구조를 보인다. 첫 번째로, 사람의 손 근육 배치와 유사한 내재/외재 구동기 배치를 적용한 힘줄 구동 로봇 손가락 구조를 제안하고 분석한다. 로봇 손가락은 다섯 개의 서로 다른 힘줄과 인대로 구성된다. 사람 손동작 분석에 기반하여 로봇 손가락의 구동기는 느린 속도를 담당하는 내재 구동기와 빠르고 큰 힘이 모두 요구되는 외재 구동기로 구분된다. 두 번째로, 구동기의 크기와 무게를 유지하며 성능을 향상하기 위하여 새로운 개념의 무단 변속기 Elastomeric Continuously Variable Transmission (ElaCVT) 을 제안하고 이를 로봇 손가락의 외재 구동기에 적용하였다. ElaCVT는 선형 구동기의 작동 영역을 확장하고 출력단에 가해지는 외부 하중에 따라 감속비를 수동적으로 변경하여 근육의 힘-속도 곡선을 모사할 수 있다. 본 연구에서는 근육의 특성을 모사하기 위해 선형 액추에이터로 ElaCVT에 줄 꼬임 메커니즘을 적용한 ElaCVT-TSA를 제안, 근육의 동작 영역을 모사할 수 있음을 보였다. 마지막으로 로봇 손가락의 모든 굽힘/펼침 관절에 적용된 사람의 관절구조를 모사한 유연 구름 접촉 관절 (Anthropomorphic Rolling Contact joint)을 제안한다. Anthropomorphic rolling contact joint는 사람 관절의 tongue-and-groove 형상과 collateral ligament를 모사하여 관절의 안정성을 향상시켰다. 기존의 유연 관절과 달리 관절이 펴진 상태에서는 유연한 상태를 유지하며 굽혀진 상태에서는 강성이 증가한다는 특징을 갖는다. 특히, 강성 변화에 별도의 구동기가 요구되지 않아 기존의 관절에서 무게, 크기 증가 없이 해당 특징 구현이 가능하다. 이는 로봇 손가락에 적용되어 손가락을 펴고 물체를 탐색하는 과정에서는 충격을 흡수하여 안정적인 접촉을 구현할 수 있으며 물체를 파지하는 과정에서는 손가락을 굽혀 강인하게 물체를 파지할 수 있게 한다. Anthropomorphic rolling contact joint를 적용한 그립퍼를 이용하여 제안하는 가변 강성 유연 관절이 pinch grasping의 파지 안정성을 높임을 보였다.1 INTRODUCTION 1 1.1 MOTIVATION: ROBOTIC HANDS 1 1.2 CONTRIBUTIONS OF THESIS 10 1.2.1 Intrinsic/Extrinsic Actuator arrangement 11 1.2.2 Linear actuator mimicking human muscle properties 11 1.2.3 Flexible rolling contact joint 12 2 ROBOTIC FINGER STRUCTURE WITH HUMAN-LIKE ACTUATOR ARRANGEMENT 13 2.1 ANALYSIS OF HUMAN FINGERTIP VELOCITY 14 2.2 THE ROBOTIC FINGER WITH INTRINSIC/EXTRINSIC ACTUATORS 18 2.2.1 The structure of proposed robotic finger 18 2.2.2 Kinematics of the robotic finger 20 2.2.3 Tendons and Ligaments of the proposed robotic finger 26 2.2.4 Decoupled fingertip motion in the sagittal plane 28 3 ELASTOMERIC CONTINUOUSLY VARIABLE TRANSMISSION COMBINED WITH TWISTED STRING ACTUATOR 35 3.1 BACKGROUND & RELATED WORKS 35 3.2 COMPARISON OF OPERATING REGIONS 40 3.3 DESIGN OF THE ELASTOMERIC CONTINUOUSLY VARIABLE TRANSMISSION 42 3.3.1 Structure of ElaCVT 42 3.3.2 Design of Elastomer and Lateral Disc 43 3.3.3 Advantages of ElaCVT 48 3.4 PERFORMANCE EVALUATION 50 3.4.1 Experimental Setup 50 3.4.2 Contraction with Fixed external load 50 3.4.3 Contraction with Variable external load 55 3.4.4 Performance variation of ElaCVT over long term usage 55 3.4.5 Specifications and Limitations of ElaCVT-TSA 59 4 ANTHROPOMORPHIC ROLLING CONTACT JOINT 61 4.1 INTRODUCTION: COMPLIANT JOINT 61 4.2 RELATED WORKS: ROLLING CONTACT JOINT 65 4.3 ANTHROPOMORPHIC ROLLING CONTACT JOINT 67 4.3.1 Fundamental Components of ARC joint 69 4.3.2 Advantages of ARC joint 73 4.4 TORSIONAL STIFFNESS EVALUATION 75 4.4.1 Experimental Setup 75 4.4.2 Design and Manufacturing of ARC joints 77 4.4.3 Torsional Stiffness Change according to Joint Angle and Twist Angle 79 4.5 TORSIONAL STIFFNESS WITH JOINT COMPRESSION FORCE DUE TO TNESION OF TENDONS 80 4.6 TORSIONAL STIFFNESS WITH LUBRICATION STRUCTURE 82 4.7 GRASPING PERFORMANCE COMPARISON OF GRIPPERS WITH DIFFERENT ARC JOINTS 86 5 CONCLUSIONS 92 Abstract (In Korean) 107박

    Variable stiffness robotic hand for stable grasp and flexible handling

    Get PDF
    Robotic grasping is a challenging area in the field of robotics. When interacting with an object, the dynamic properties of the object will play an important role where a gripper (as a system), which has been shown to be stable as per appropriate stability criteria, can become unstable when coupled to an object. However, including a sufficiently compliant element within the actuation system of the robotic hand can increase the stability of the grasp in the presence of uncertainties. This paper deals with an innovative robotic variable stiffness hand design, VSH1, for industrial applications. The main objective of this work is to realise an affordable, as well as durable, adaptable, and compliant gripper for industrial environments with a larger interval of stiffness variability than similar existing systems. The driving system for the proposed hand consists of two servo motors and one linear spring arranged in a relatively simple fashion. Having just a single spring in the actuation system helps us to achieve a very small hysteresis band and represents a means by which to rapidly control the stiffness. We prove, both mathematically and experimentally, that the proposed model is characterised by a broad range of stiffness. To control the grasp, a first-order sliding mode controller (SMC) is designed and presented. The experimental results provided will show how, despite the relatively simple implementation of our first prototype, the hand performs extremely well in terms of both stiffness variability and force controllability

    Safe and effective physical human-robot interaction: Approaches to variable compliance via soft joints and soft grippers

    Get PDF
    The work described in this thesis focusses on designing and building two novel physical devices in a robotic arm structure. The arm is intended for human-robot interaction in the domestic assistive robotics area. The first device aims at helping to ensure the safety of the human user. It acts as a mechanical fuse and disconnects the robotic arm link from its motor in case of collision. The device behaves in a rigid manner in normal operational times and in a compliant manner in case of potentially harmful collisions: it relies on a variable compliance. The second device is the end-effector of the robotic arm. It is a novel grasping device that aims at accommodating varying object shapes. This is achieved by the structure of the grasping device that is a soft structure with a compliant and a rigid phase. Its completely soft structure is able to mould to the object's shape in the compliant phase, while the rigid phase allows holding the object in a stable way.In this study, variable compliance is defined as a physical structure's change from a compliant to a rigid behaviour and vice versa. Due to its versatility and effectiveness, variable compliance has become the founding block of the design of the two devices in the robot arm physical structure. The novelty of the employment of variable compliance in this thesis resides in its use in both rigid and soft devices in order to help ensure both safety and adaptable grasping in one integrated physical structure, the robot arm.The safety device has been designed, modelled, produced, tested and physically embedded in the robot arm system. Compared to previous work in this field, the feature described in this thesis' work has a major advantage: its torque threshold can be actively regulated depending on the operational situation. The threshold torque is best described by an exponential curve in the mathematical model while it is best fit by a second order equation in the experimental data. The mismatch is more considerable for high values of threshold torque. However, both curves reflect that threshold torque magnitude increases by increasing the setting of the device. Testing of both the passive decoupling and active threshold torque regulation show that both are successfully obtained. The second novel feature of the robot arm is the soft grasping device inspired by hydrostatic skeletons. Its ability to passively adapts to complex shapes objects, reduces the complexity of the grasping action control. This gripper is low-cost, soft, cable-driven and it features no stiff sections. Its versatility, variable compliance and stable grasp are shown in several experiments. A model of the forward kinematics of the system is derived from observation of its bending behaviour.Variable compliance has shown to be a very relevant principle for the design and implementation of a robotic arm aimed at safely interacting with human users and that can reduce grasp control complexity by passively adapting to the object's shape

    Adaptive Synergies for the Design and Control of the Pisa/IIT SoftHand

    Get PDF
    In this paper we introduce the Pisa/IIT SoftHand, a novel robot hand prototype designed with the purpose of being robust and easy to control as an industrial gripper, while exhibiting high grasping versatility and an aspect similar to that of the human hand. In the paper we briefly review the main theoretical tools used to enable such simplification, i.e. the neuroscience-based notion of soft synergies. A discussion of several possible actuation schemes shows that a straightforward implementation of the soft synergy idea in an effective design is not trivial. The approach proposed in this paper, called adaptive synergy, rests on ideas coming from underactuated hand design. A synthesis method to realize a desired set of soft synergies through the principled design of adaptive synergy is discussed. This approach leads to the design of hands accommodating in principle an arbitrary number of soft synergies, as demonstrated in grasping and manipulation simulations and experiments with a prototype. As a particular instance of application of the synthesis method of adaptive synergies, the Pisa/IIT SoftHand is described in detail. The hand has 19 joints, but only uses 1 actuator to activate its adaptive synergy. Of particular relevance in its design is the very soft and safe, yet powerful and extremely robust structure, obtained through the use of innovative articulations and ligaments replacing conventional joint design. The design and implementation of the prototype hand are shown and its effectiveness demonstrated through grasping experiments, reported also in multimedia extensio

    An Overview on Principles for Energy Efficient Robot Locomotion

    Get PDF
    Despite enhancements in the development of robotic systems, the energy economy of today's robots lags far behind that of biological systems. This is in particular critical for untethered legged robot locomotion. To elucidate the current stage of energy efficiency in legged robotic systems, this paper provides an overview on recent advancements in development of such platforms. The covered different perspectives include actuation, leg structure, control and locomotion principles. We review various robotic actuators exploiting compliance in series and in parallel with the drive-train to permit energy recycling during locomotion. We discuss the importance of limb segmentation under efficiency aspects and with respect to design, dynamics analysis and control of legged robots. This paper also reviews a number of control approaches allowing for energy efficient locomotion of robots by exploiting the natural dynamics of the system, and by utilizing optimal control approaches targeting locomotion expenditure. To this end, a set of locomotion principles elaborating on models for energetics, dynamics, and of the systems is studied

    Design and Characterization of a Novel High-Power Series Elastic Actuator for a Lower Limb Robotic Orthosis

    Get PDF
    A safe interaction is crucial in wearable robotics in general, while in assistive and rehabilitation applications, robots may also be required to minimally perturb physiological movements, ideally acting as perfectly transparent machines. The actuation system plays a central role because the expected performance, in terms of torque, speed and control bandwidth, must not be achieved at the expense of lightness and compactness. Actuators embedding compliant elements, such as series elastic actuators, can be designed to meet the above-mentioned requirements in terms of high energy storing capacity and stability of torque control. A number of series elastic actuators have been proposed over the past 20 years in order to accommodate the needs arising from specific applications. This paper presents a novel series elastic actuator intended for the actuation system of a lower limb wearable robot, recently developed in our lab. The actuator is able to deliver 300 W and has a novel architecture making its centre of mass not co-located with its axis of rotation, for an easier integration into the robotic structure. A custom-made torsion spring with a stiffness of 272.25 N·m·rad– 1 is directly connected to the load. The delivered torque is calculated from the measurement of the spring deflection, through two absolute encoders. Testing on torque measurement accuracy and torque/stiffness control are reported

    Design, modeling, and control of a variable stiffness elbow joint

    Get PDF
    New technological advances are changing the way robotics are designed for safe and dependable physical human–robot interaction and human-like prosthesis. Outstanding examples are the adoption of soft covers, compliant transmission elements, and motion control laws that allow compliant behavior in the event of collisions while preserving accuracy and performance during motion in free space. In this scenario, there is growing interest in variable stiffness actuators (VSAs). Herein, we present a new design of an anthropomorphic elbow VSA based on an architecture we developed previously. A robust dynamic feedback linearization algorithm is used to achieve simultaneous control of the output link position and stiffness. This actuation system makes use of two compliant transmission elements, characterized by a nonlinear relation between deflection and applied torque. Static feedback control algorithms have been proposed in literature considering purely elastic transmission; however, viscoelasticity is often observed in practice. This phenomenon may harm the performance of static feedback linearization algorithms, particularly in the case of trajectory tracking. To overcome this limitation, we propose a dynamic feedback linearization algorithm that explicitly considers the viscoelasticity of the transmission elements, and validate it through simulations and experimental studies. The results are compared with the static feedback case to showcase the improvement in trajectory tracking, even in the case of parameter uncertainty

    Compliant aerial manipulation.

    Get PDF
    The aerial manipulation is a research field which proposes the integration of robotic manipulators in aerial platforms, typically multirotors – widely known as “drones” – or autonomous helicopters. The development of this technology is motivated by the convenience to reduce the time, cost and risk associated to the execution of certain operations or tasks in high altitude areas or difficult access workspaces. Some illustrative application examples are the detection and insulation of leaks in pipe structures in chemical plants, repairing the corrosion in the blades of wind turbines, the maintenance of power lines, or the installation and retrieval of sensor devices in polluted areas. Although nowadays it is possible to find a wide variety of commercial multirotor platforms with payloads from a few gramps up to several kilograms, and flight times around thirty minutes, the development of an aerial manipulator is still a technological challenge due to the strong requirements relative to the design of the manipulator in terms of very low weight, low inertia, dexterity, mechanical robustness and control. The main contribution of this thesis is the design, development and experimental validation of several prototypes of lightweight (<2 kg) and compliant manipulators to be integrated in multirotor platforms, including human-size dual arm systems, compliant joint arms equipped with human-like finger modules for grasping, and long reach aerial manipulators. Since it is expected that the aerial manipulator is capable to execute inspection and maintenance tasks in a similar way a human operator would do, this thesis proposes a bioinspired design approach, trying to replicate the human arm in terms of size, kinematics, mass distribution, and compliance. This last feature is actually one of the key concepts developed and exploited in this work. Introducing a flexible element such as springs or elastomers between the servos and the links extends the capabilities of the manipulator, allowing the estimation and control of the torque/force, the detection of impacts and overloads, or the localization of obstacles by contact. It also improves safety and efficiency of the manipulator, especially during the operation on flight or in grabbing situations, where the impacts and contact forces may damage the manipulator or destabilize the aerial platform. Unlike most industrial manipulators, where force-torque control is possible at control rates above 1 kHz, the servo actuators typically employed in the development of aerial manipulators present important technological limitations: no torque feedback nor control, only position (and in some models, speed) references, low update rates (<100 Hz), and communication delays. However, these devices are still the best solution due to their high torque to weight ratio, low cost, compact design, and easy assembly and integration. In order to cope with these limitations, the compliant joint arms presented here estimate and control the wrenches from the deflection of the spring-lever transmission mechanism introduced in the joints, measured at joint level with encoders or potentiometers, or in the Cartesian space employing vision sensors. Note that in the developed prototypes, the maximum joint deflection is around 25 degrees, which corresponds to a deviation in the position of the end effector around 20 cm for a human-size arm. The capabilities and functionalities of the manipulators have been evaluated in fixed base test-bench firstly, and then in outdoor flight tests, integrating the arms in different commercial hexarotor platforms. Frequency characterization, position/force/impedance control, bimanual grasping, arm teleoperation, payload mass estimation, or contact-based obstacle localization are some of the experiments presented in this thesis that validate the developed prototypes.La manipulación aérea es un campo de investigación que propone la integración de manipuladores robóticos in plataformas aéreas, típicamente multirotores – comúnmente conocidos como “drones” – o helicópteros autónomos. El desarrollo de esta tecnología está motivada por la conveniencia de reducir el tiempo, coste y riesgo asociado a la ejecución de ciertas operaciones o tareas en áreas de gran altura o espacios de trabajo de difícil acceso. Algunos ejemplos ilustrativos de aplicaciones son la detección y aislamiento de fugas en estructura de tuberías en plantas químicas, la reparación de la corrosión en las palas de aerogeneradores, el mantenimiento de líneas eléctricas, o la instalación y recuperación de sensores en zonas contaminadas. Aunque hoy en día es posible encontrar una amplia variedad de plataformas multirotor comerciales con cargas de pago desde unos pocos gramos hasta varios kilogramos, y tiempo de vuelo entorno a treinta minutos, el desarrollo de los manipuladores aéreos es todavía un desafío tecnológico debido a los exigentes requisitos relativos al diseño del manipulador en términos de muy bajo peso, baja inercia, destreza, robustez mecánica y control. La contribución principal de esta tesis es el diseño, desarrollo y validación experimental de varios prototipos de manipuladores de bajo peso (<2 kg) con capacidad de acomodación (“compliant”) para su integración en plataformas aéreas multirotor, incluyendo sistemas bi-brazo de tamaño humano, brazos robóticos de articulaciones flexibles con dedos antropomórficos para agarre, y manipuladores aéreos de largo alcance. Puesto que se prevé que el manipulador aéreo sea capaz de ejecutar tareas de inspección y mantenimiento de forma similar a como lo haría un operador humano, esta tesis propone un enfoque de diseño bio-inspirado, tratando de replicar el brazo humano en cuanto a tamaño, cinemática, distribución de masas y flexibilidad. Esta característica es de hecho uno de los conceptos clave desarrollados y utilizados en este trabajo. Al introducir un elemento elástico como los muelles o elastómeros entre el los actuadores y los enlaces se aumenta las capacidades del manipulador, permitiendo la estimación y control de las fuerzas y pares, la detección de impactos y sobrecargas, o la localización de obstáculos por contacto. Además mejora la seguridad y eficiencia del manipulador, especialmente durante las operaciones en vuelo, donde los impactos y fuerzas de contacto pueden dañar el manipulador o desestabilizar la plataforma aérea. A diferencia de la mayoría de manipuladores industriales, donde el control de fuerzas y pares es posible a tasas por encima de 1 kHz, los servo motores típicamente utilizados en el desarrollo de manipuladores aéreos presentan importantes limitaciones tecnológicas: no hay realimentación ni control de torque, sólo admiten referencias de posición (o bien de velocidad), y presentan retrasos de comunicación. Sin embargo, estos dispositivos son todavía la mejor solución debido al alto ratio de torque a peso, por su bajo peso, diseño compacto y facilidad de ensamblado e integración. Para suplir estas limitaciones, los brazos robóticos flexibles presentados aquí permiten estimar y controlar las fuerzas a partir de la deflexión del mecanismo de muelle-palanca introducido en las articulaciones, medida a nivel articular mediante potenciómetros o codificadores, o en espacio Cartesiano mediante sensores de visión. Tómese como referencia que en los prototipos desarrollados la máxima deflexión articular es de unos 25 grados, lo que corresponde a una desviación de posición en torno a 20 cm en el efector final para un brazo de tamaño humano. Las capacidades y funcionalidades de estos manipuladores se han evaluado en base fija primero, y luego en vuelos en exteriores, integrando los brazos en diferentes plataformas hexartor comerciales. Caracterización frecuencial, control de posición/fuerza/impedancia, agarre bimanual, teleoperación de brazos, estimación de carga, o la localización de obstáculos mediante contacto son algunos de los experimentos presentados en esta tesis para validar los prototipos desarrollados por el auto
    corecore