Energy Saving Techniques for Phase Change Memory (PCM)

In recent years, the energy consumption of computing systems has increased and a large fraction of this energy is consumed in main memory. Towards this, researchers have proposed use of non-volatile memory, such as phase change memory (PCM), which has low read latency and power; and nearly zero leakage power. However, the write latency and power of PCM are very high and this, along with limited write endurance of PCM present significant challenges in enabling wide-spread adoption of PCM. To address this, several architecture-level techniques have been proposed. In this report, we review several techniques to manage power consumption of PCM. We also classify these techniques based on their characteristics to provide insights into them. The aim of this work is encourage researchers to propose even better techniques for improving energy efficiency of PCM based main memory.Comment: Survey, phase change RAM (PCRAM

Design of multimedia processor based on metric computation

Media-processing applications, such as signal processing, 2D and 3D graphics rendering, and image compression, are the dominant workloads in many embedded systems today. The real-time constraints of those media applications have taxing demands on today's processor performances with low cost, low power and reduced design delay. To satisfy those challenges, a fast and efficient strategy consists in upgrading a low cost general purpose processor core. This approach is based on the personalization of a general RISC processor core according the target multimedia application requirements. Thus, if the extra cost is justified, the general purpose processor GPP core can be enforced with instruction level coprocessors, coarse grain dedicated hardware, ad hoc memories or new GPP cores. In this way the final design solution is tailored to the application requirements. The proposed approach is based on three main steps: the first one is the analysis of the targeted application using efficient metrics. The second step is the selection of the appropriate architecture template according to the first step results and recommendations. The third step is the architecture generation. This approach is experimented using various image and video algorithms showing its feasibility

Exploring Processor and Memory Architectures for Multimedia

Multimedia has become one of the cornerstones of our 21st century society and, when combined with mobility, has enabled a tremendous evolution of our society. However, joining these two concepts introduces many technical challenges. These range from having sufficient performance for handling multimedia content to having the battery stamina for acceptable mobile usage. When taking a projection of where we are heading, we see these issues becoming ever more challenging by increased mobility as well as advancements in multimedia content, such as introduction of stereoscopic 3D and augmented reality. The increased performance needs for handling multimedia come not only from an ongoing step-up in resolution going from QVGA (320x240) to Full HD (1920x1080) a 27x increase in less than half a decade. On top of this, there is also codec evolution (MPEG-2 to H.264 AVC) that adds to the computational load increase. To meet these performance challenges there has been processing and memory architecture advances (SIMD, out-of-order superscalarity, multicore processing and heterogeneous multilevel memories) in the mobile domain, in conjunction with ever increasing operating frequencies (200MHz to 2GHz) and on-chip memory sizes (128KB to 2-3MB). At the same time there is an increase in requirements for mobility, placing higher demands on battery-powered systems despite the steady increase in battery capacity (500 to 2000mAh). This leaves negative net result in-terms of battery capacity versus performance advances. In order to make optimal use of these architectural advances and to meet the power limitations in mobile systems, there is a need for taking an overall approach on how to best utilize these systems. The right trade-off between performance and power is crucial. On top of these constraints, the flexibility aspects of the system need to be addressed. All this makes it very important to reach the right architectural balance in the system. The first goal for this thesis is to examine multimedia applications and propose a flexible solution that can meet the architectural requirements in a mobile system. Secondly, propose an automated methodology of optimally mapping multimedia data and instructions to a heterogeneous multilevel memory subsystem. The proposed methodology uses constraint programming for solving a multidimensional optimization problem. Results from this work indicate that using today’s most advanced mobile processor technology together with a multi-level heterogeneous on-chip memory subsystem can meet the performance requirements for handling multimedia. By utilizing the automated optimal memory mapping method presented in this thesis lower total power consumption can be achieved, whilst performance for multimedia applications is improved, by employing enhanced memory management. This is achieved through reduced external accesses and better reuse of memory objects. This automatic method shows high accuracy, up to 90%, for predicting multimedia memory accesses for a given architecture

Performance and power optimizations in chip multiprocessors for throughput-aware computation

The so-called "power (or power density) wall" has caused core frequency (and single-thread performance) to slow down, giving rise to the era of multi-core/multi-thread processors. For example, the IBM POWER4 processor, released in 2001, incorporated two single-thread cores into the same chip. In 2010, IBM released the POWER7 processor with eight 4-thread cores in the same chip, for a total capacity of 32 execution contexts. The ever increasing number of cores and threads gives rise to new opportunities and challenges for software and hardware architects. At software level, applications can benefit from the abundant number of execution contexts to boost throughput. But this challenges programmers to create highly-parallel applications and operating systems capable of scheduling them correctly. At hardware level, the increasing core and thread count puts pressure on the memory interface, because memory bandwidth grows at a slower pace ---phenomenon known as the "bandwidth (or memory) wall". In addition to memory bandwidth issues, chip power consumption rises due to manufacturers' difficulty to lower operating voltages sufficiently every processor generation. This thesis presents innovations to improve bandwidth and power consumption in chip multiprocessors (CMPs) for throughput-aware computation: a bandwidth-optimized last-level cache (LLC), a bandwidth-optimized vector register file, and a power/performance-aware thread placement heuristic. In contrast to state-of-the-art LLC designs, our organization avoids data replication and, hence, does not require keeping data coherent. Instead, the address space is statically distributed all over the LLC (in a fine-grained interleaving fashion). The absence of data replication increases the cache effective capacity, which results in better hit rates and higher bandwidth compared to a coherent LLC. We use double buffering to hide the extra access latency due to the lack of data replication. The proposed vector register file is composed of thousands of registers and organized as an aggregation of banks. We leverage such organization to attach small special-function "local computation elements" (LCEs) to each bank. This approach ---referred to as the "processor-in-regfile" (PIR) strategy--- overcomes the limited number of register file ports. Because each LCE is a SIMD computation element and all of them can proceed concurrently, the PIR strategy constitutes a highly-parallel super-wide-SIMD device (ideal for throughput-aware computation). Finally, we present a heuristic to reduce chip power consumption by dynamically placing software (application) threads across hardware (physical) threads. The heuristic gathers chip-level power and performance information at runtime to infer characteristics of the applications being executed. For example, if an application's threads share data, the heuristic may decide to place them in fewer cores to favor inter-thread data sharing and communication. In such case, the number of active cores decreases, which is a good opportunity to switch off the unused cores to save power. It is increasingly harder to find bulletproof (micro-)architectural solutions for the bandwidth and power scalability limitations in CMPs. Consequently, we think that architects should attack those problems from different flanks simultaneously, with complementary innovations. This thesis contributes with a battery of solutions to alleviate those problems in the context of throughput-aware computation: 1) proposing a bandwidth-optimized LLC; 2) proposing a bandwidth-optimized register file organization; and 3) proposing a simple technique to improve power-performance efficiency.El excesivo consumo de potencia de los procesadores actuales ha desacelerado el incremento en la frecuencia operativa de los mismos para dar lugar a la era de los procesadores con múltiples núcleos y múltiples hilos de ejecución. Por ejemplo, el procesador POWER7 de IBM, lanzado al mercado en 2010, incorpora ocho núcleos en el mismo chip, con cuatro hilos de ejecución por núcleo. Esto da lugar a nuevas oportunidades y desafíos para los arquitectos de software y hardware. A nivel de software, las aplicaciones pueden beneficiarse del abundante número de núcleos e hilos de ejecución para aumentar el rendimiento. Pero esto obliga a los programadores a crear aplicaciones altamente paralelas y sistemas operativos capaces de planificar correctamente la ejecución de las mismas. A nivel de hardware, el creciente número de núcleos e hilos de ejecución ejerce presión sobre la interfaz de memoria, ya que el ancho de banda de memoria crece a un ritmo más lento. Además de los problemas de ancho de banda de memoria, el consumo de energía del chip se eleva debido a la dificultad de los fabricantes para reducir suficientemente los voltajes de operación entre generaciones de procesadores. Esta tesis presenta innovaciones para mejorar el ancho de banda y consumo de energía en procesadores multinúcleo en el ámbito de la computación orientada a rendimiento ("throughput-aware computation"): una memoria caché de último nivel ("last-level cache" o LLC) optimizada para ancho de banda, un banco de registros vectorial optimizado para ancho de banda, y una heurística para planificar la ejecución de aplicaciones paralelas orientada a mejorar la eficiencia del consumo de potencia y desempeño. En contraste con los diseños de LLC de última generación, nuestra organización evita la duplicación de datos y, por tanto, no requiere de técnicas de coherencia. El espacio de direcciones de memoria se distribuye estáticamente en la LLC con un entrelazado de grano fino. La ausencia de replicación de datos aumenta la capacidad efectiva de la memoria caché, lo que se traduce en mejores tasas de acierto y mayor ancho de banda en comparación con una LLC coherente. Utilizamos la técnica de "doble buffering" para ocultar la latencia adicional necesaria para acceder a datos remotos. El banco de registros vectorial propuesto se compone de miles de registros y se organiza como una agregación de bancos. Incorporamos a cada banco una pequeña unidad de cómputo de propósito especial ("local computation element" o LCE). Este enfoque ---que llamamos "computación en banco de registros"--- permite superar el número limitado de puertos en el banco de registros. Debido a que cada LCE es una unidad de cómputo con soporte SIMD ("single instruction, multiple data") y todas ellas pueden proceder de forma concurrente, la estrategia de "computación en banco de registros" constituye un dispositivo SIMD altamente paralelo. Por último, presentamos una heurística para planificar la ejecución de aplicaciones paralelas orientada a reducir el consumo de energía del chip, colocando dinámicamente los hilos de ejecución a nivel de software entre los hilos de ejecución a nivel de hardware. La heurística obtiene, en tiempo de ejecución, información de consumo de potencia y desempeño del chip para inferir las características de las aplicaciones. Por ejemplo, si los hilos de ejecución a nivel de software comparten datos significativamente, la heurística puede decidir colocarlos en un menor número de núcleos para favorecer el intercambio de datos entre ellos. En tal caso, los núcleos no utilizados se pueden apagar para ahorrar energía. Cada vez es más difícil encontrar soluciones de arquitectura "a prueba de balas" para resolver las limitaciones de escalabilidad de los procesadores actuales. En consecuencia, creemos que los arquitectos deben atacar dichos problemas desde diferentes flancos simultáneamente, con innovaciones complementarias

Dynamically reconfigurable architecture for embedded computer vision systems

The objective of this research work is to design, develop and implement a new architecture which integrates on the same chip all the processing levels of a complete Computer Vision system, so that the execution is efficient without compromising the power consumption while keeping a reduced cost. For this purpose, an analysis and classification of different mathematical operations and algorithms commonly used in Computer Vision are carried out, as well as a in-depth review of the image processing capabilities of current-generation hardware devices. This permits to determine the requirements and the key aspects for an efficient architecture. A representative set of algorithms is employed as benchmark to evaluate the proposed architecture, which is implemented on an FPGA-based system-on-chip. Finally, the prototype is compared to other related approaches in order to determine its advantages and weaknesses