An automatic tool flow for the combined implementation of multi-mode circuits

A multi-mode circuit implements the functionality of a limited number of circuits, called modes, of which at any given time only one needs to be realised. Using run-time reconfiguration of an FPGA, all the modes can be implemented on the same reconfigurable region, requiring only an area that can contain the biggest mode. Typically, conventional run-time reconfiguration techniques generate a configuration for every mode separately. To switch between modes the complete reconfigurable region is rewritten, which often leads to very long reconfiguration times. In this paper we present a novel, fully automated tool flow that exploits similarities between the modes and uses Dynamic Circuit Specialization to drastically reduce reconfiguration time. Experimental results show that the number of bits that is rewritten in the configuration memory reduces with a factor from 4.6X to 5.1X without significant performance penalties

Network Virtual Machine (NetVM): A New Architecture for Efficient and Portable Packet Processing Applications

A challenge facing network device designers, besides increasing the speed of network gear, is improving its programmability in order to simplify the implementation of new applications (see for example, active networks, content networking, etc). This paper presents our work on designing and implementing a virtual network processor, called NetVM, which has an instruction set optimized for packet processing applications, i.e., for handling network traffic. Similarly to a Java Virtual Machine that virtualizes a CPU, a NetVM virtualizes a network processor. The NetVM is expected to provide a compatibility layer for networking tasks (e.g., packet filtering, packet counting, string matching) performed by various packet processing applications (firewalls, network monitors, intrusion detectors) so that they can be executed on any network device, ranging from expensive routers to small appliances (e.g. smart phones). Moreover, the NetVM will provide efficient mapping of the elementary functionalities used to realize the above mentioned networking tasks upon specific hardware functional units (e.g., ASICs, FPGAs, and network processing elements) included in special purpose hardware systems possibly deployed to implement network devices

High-speed, in-band performance measurement instrumentation for next generation IP networks

Facilitating always-on instrumentation of Internet traffic for the purposes of performance measurement is crucial in order to enable accountability of resource usage and automated network control, management and optimisation. This has proven infeasible to date due to the lack of native measurement mechanisms that can form an integral part of the network‟s main forwarding operation. However, Internet Protocol version 6 (IPv6) specification enables the efficient encoding and processing of optional per-packet information as a native part of the network layer, and this constitutes a strong reason for IPv6 to be adopted as the ubiquitous next generation Internet transport. In this paper we present a very high-speed hardware implementation of in-line measurement, a truly native traffic instrumentation mechanism for the next generation Internet, which facilitates performance measurement of the actual data-carrying traffic at small timescales between two points in the network. This system is designed to operate as part of the routers' fast path and to incur an absolutely minimal impact on the network operation even while instrumenting traffic between the edges of very high capacity links. Our results show that the implementation can be easily accommodated by current FPGA technology, and real Internet traffic traces verify that the overhead incurred by instrumenting every packet over a 10 Gb/s operational backbone link carrying a typical workload is indeed negligible

The MANGO Process for Designing and Programming Multi-Accelerator Multi-FPGA Systems

[EN] This paper describes the approach followed in the European FETHPC MANGO project to design and program systems made of multiple FPGAs interconnected. The MANGO approach relies on the instantiation and management of multiple generic and custom-made accelerators which can be programmed to communicate each other via shared memory and through synchronization registers. The paper introduces the low level architecture including the multi-FPGA interconnect deployed, the communication protocol and the architectural template-based approach to simplify the design process.This work is supported by the European Commission through MANGO project, under the Horizon 2020 FET-HPC program, grant number 671668.Tornero-Gavilá, R.; Flich Cardo, J.; Martínez Martínez, JM.; Picornell-Sanjuan, T.; Scotti, V. (2018). The MANGO Process for Designing and Programming Multi-Accelerator Multi-FPGA Systems. En Fourth International Workshop on Heterogeneous High-Performance Reconfigurable Computing (H2RC'18). ACM. http://hdl.handle.net/10251/114284

Circuit design and analysis for on-FPGA communication systems

On-chip communication system has emerged as a prominently important subject in Very-Large- Scale-Integration (VLSI) design, as the trend of technology scaling favours logics more than interconnects. Interconnects often dictates the system performance, and, therefore, research for new methodologies and system architectures that deliver high-performance communication services across the chip is mandatory. The interconnect challenge is exacerbated in Field-Programmable Gate Array (FPGA), as a type of ASIC where the hardware can be programmed post-fabrication. Communication across an FPGA will be deteriorating as a result of interconnect scaling. The programmable fabrics, switches and the specific routing architecture also introduce additional latency and bandwidth degradation further hindering intra-chip communication performance. Past research efforts mainly focused on optimizing logic elements and functional units in FPGAs. Communication with programmable interconnect received little attention and is inadequately understood. This thesis is among the first to research on-chip communication systems that are built on top of programmable fabrics and proposes methodologies to maximize the interconnect throughput performance. There are three major contributions in this thesis: (i) an analysis of on-chip interconnect fringing, which degrades the bandwidth of communication channels due to routing congestions in reconfigurable architectures; (ii) a new analogue wave signalling scheme that significantly improves the interconnect throughput by exploiting the fundamental electrical characteristics of the reconfigurable interconnect structures. This new scheme can potentially mitigate the interconnect scaling challenges. (iii) a novel Dynamic Programming (DP)-network to provide adaptive routing in network-on-chip (NoC) systems. The DP-network architecture performs runtime optimization for route planning and dynamic routing which, effectively utilizes the in-silicon bandwidth. This thesis explores a new horizon in reconfigurable system design, in which new methodologies and concepts are proposed to enhance the on-FPGA communication throughput performance that is of vital importance in new technology processes

A Modular Approach to Adaptive Reactive Streaming Systems

The latest generations of FPGA devices offer large resource counts that provide the headroom to implement large-scale and complex systems. However, there are increasing challenges for the designer, not just because of pure size and complexity, but also in harnessing effectively the flexibility and programmability of the FPGA. A central issue is the need to integrate modules from diverse sources to promote modular design and reuse. Further, the capability to perform dynamic partial reconfiguration (DPR) of FPGA devices means that implemented systems can be made reconfigurable, allowing components to be changed during operation. However, use of DPR typically requires low-level planning of the system implementation, adding to the design challenge. This dissertation presents ReShape: a high-level approach for designing systems by interconnecting modules, which gives a ‘plug and play’ look and feel to the designer, is supported by tools that carry out implementation and verification functions, and is carried through to support system reconfiguration during operation. The emphasis is on the inter-module connections and abstracting the communication patterns that are typical between modules – for example, the streaming of data that is common in many FPGA-based systems, or the reading and writing of data to and from memory modules. ShapeUp is also presented as the static precursor to ReShape. In both, the details of wiring and signaling are hidden from view, via metadata associated with individual modules. ReShape allows system reconfiguration at the module level, by supporting type checking of replacement modules and by managing the overall system implementation, via metadata associated with its FPGA floorplan. The methodology and tools have been implemented in a prototype for a broad domain-specific setting – networking systems – and have been validated on real telecommunications design projects

Configurable data center switch architectures

In this thesis, we explore alternative architectures for implementing con_gurable Data Center Switches along with the advantages that can be provided by such switches. Our first contribution centers around determining switch architectures that can be implemented on Field Programmable Gate Array (FPGA) to provide configurable switching protocols. In the process, we identify a gap in the availability of frameworks to realistically evaluate the performance of switch architectures in data centers and contribute a simulation framework that relies on realistic data center traffic patterns. Our framework is then used to evaluate the performance of currently existing as well as newly proposed FPGA-amenable switch designs. Through collaborative work with Meng and Papaphilippou, we establish that only small-medium range switches can be implemented on today's FPGAs. Our second contribution is a novel switch architecture that integrates a custom in-network hardware accelerator with a generic switch to accelerate Deep Neural Network training applications in data centers. Our proposed accelerator architecture is prototyped on an FPGA, and a scalability study is conducted to demonstrate the trade-offs of an FPGA implementation when compared to an ASIC implementation. In addition to the hardware prototype, we contribute a light weight load-balancing and congestion control protocol that leverages the unique communication patterns of ML data-parallel jobs to enable fair sharing of network resources across different jobs. Our large-scale simulations demonstrate the ability of our novel switch architecture and light weight congestion control protocol to both accelerate the training time of machine learning jobs by up to 1.34x and benefit other latency-sensitive applications by reducing their 99%-tile completion time by up to 4.5x. As for our final contribution, we identify the main requirements of in-network applications and propose a Network-on-Chip (NoC)-based architecture for supporting a heterogeneous set of applications. Observing the lack of tools to support such research, we provide a tool that can be used to evaluate NoC-based switch architectures.Open Acces