An Asynchronous Multi-Sensor Micro Control Unit for Wireless Body Sensor Networks (WBSNs)

In this work, an asynchronous multi-sensor micro control unit (MCU) core is proposed for wireless body sensor networks (WBSNs). It consists of asynchronous interfaces, a power management unit, a multi-sensor controller, a data encoder (DE), and an error correct coder (ECC). To improve the system performance and expansion abilities, the asynchronous interface is created for handshaking different clock domains between ADC and RF with MCU. To increase the use time of the WBSN system, a power management technique is developed for reducing power consumption. In addition, the multi-sensor controller is designed for detecting various biomedical signals. To prevent loss error from wireless transmission, use of an error correct coding technique is important in biomedical applications. The data encoder is added for lossless compression of various biomedical signals with a compression ratio of almost three. This design is successfully tested on a FPGA board. The VLSI architecture of this work contains 2.68-K gate counts and consumes power 496-μW at 133-MHz processing rate by using TSMC 0.13-μm CMOS process. Compared with the previous techniques, this work offers higher performance, more functions, and lower hardware cost than other micro controller designs

Wireless body sensor networks for health-monitoring applications

This is an author-created, un-copyedited version of an article accepted for publication in Physiological Measurement. The publisher is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at http://dx.doi.org/10.1088/0967-3334/29/11/R01

Design techniques for smart and energy-efficient wireless body sensor networks

Tesis inédita de la Universidad Complutense de Madrid, Facultad de Informática, Departamento de Arquitectura de Computadores y Automática, leída el 26/10/2012Las redes inalámbricas de sensores corporales (en inglés: "wireless body sensor networks" o WBSNs) para monitorización, diagnóstico y detección de emergencias, están ganando popularidad y están llamadas a cambiar profundamente la asistencia sanitaria en los próximos años. El uso de estas redes permite una supervisión continua, contribuyendo a la prevención y el diagnóstico precoz de enfermedades, al tiempo que mejora la autonomía del paciente con respecto a otros sistemas de monitorización actuales. Valiéndose de esta tecnología, esta tesis propone el desarrollo de un sistema de monitorización de electrocardiograma (ECG), que no sólo muestre continuamente el ECG del paciente, sino que además lo analice en tiempo real y sea capaz de dar información sobre el estado del corazón a través de un dispositivo móvil. Esta información también puede ser enviada al personal médico en tiempo real. Si ocurre un evento peligroso, el sistema lo detectará automáticamente e informará de inmediato al paciente y al personal médico, posibilitando una rápida reacción en caso de emergencia. Para conseguir la implementación de dicho sistema, se desarrollan y optimizan distintos algoritmos de procesamiento de ECG en tiempo real, que incluyen filtrado, detección de puntos característicos y clasificación de arritmias. Esta tesis también aborda la mejora de la eficiencia energética de la red de sensores, cumpliendo con los requisitos de fidelidad y rendimiento de la aplicación. Para ello se proponen técnicas de diseño para reducir el consumo de energía, que permitan buscar un compromiso óptimo entre el tamaño de la batería y su tiempo de vida. Si el consumo de energía puede reducirse lo suficiente, sería posible desarrollar una red que funcione permanentemente. Por lo tanto, el muestreo, procesamiento, almacenamiento y transmisión inalámbrica tienen que hacerse de manera que se suministren todos los datos relevantes, pero con el menor consumo posible de energía, minimizando así el tamaño de la batería (que condiciona el tamaño total del nodo) y la frecuencia de recarga de la batería (otro factor clave para su usabilidad). Por lo tanto, para lograr una mejora en la eficiencia energética del sistema de monitorización y análisis de ECG propuesto en esta tesis, se estudian varias soluciones a nivel de control de acceso al medio y sistema operativo.Depto. de Arquitectura de Computadores y AutomáticaFac. de InformáticaTRUEunpu

A High-Accuracy and Power-Efficient Self-Optimizing Wireless Water Level Monitoring IoT Device for Smart City

In this paper; a novel self-optimizing water level monitoring methodology is proposed for smart city applications. Considering system maintenance; the efficiency of power consumption and accuracy will be important for Internet of Things (IoT) devices and systems. A multi-step measurement mechanism and power self-charging process are proposed in this study for improving the efficiency of a device for water level monitoring applications. The proposed methodology improved accuracy by 0.16–0.39% by moving the sensor to estimate the distance relative to different locations. Additional power is generated by executing a multi-step measurement while the power self-optimizing process used dynamically adjusts the settings to balance the current of charging and discharging. The battery level can efficiently go over 50% in a stable charging simulation. These methodologies were successfully implemented using an embedded control device; an ultrasonic sensor module; a LORA transmission module; and a stepper motor. According to the experimental results; the proposed multi-step methodology has the benefits of high accuracy and efficient power consumption for water level monitoring applications

VLSI Implementation of an Efficient Lossless EEG Compression Design for Wireless Body Area Network

Data transmission of electroencephalography (EEG) signals over Wireless Body Area Network (WBAN) is currently a widely used system that comes together with challenges in terms of efficiency and effectivity. In this study, an effective Very-Large-Scale Integration (VLSI) circuit design of lossless EEG compression circuit is proposed to increase both efficiency and effectivity of EEG signal transmission over WBAN. The proposed design was realized based on a novel lossless compression algorithm which consists of an adaptive fuzzy predictor, a voting-based scheme and a tri-stage entropy encoder. The tri-stage entropy encoder is composed of a two-stage Huffman and Golomb-Rice encoders with static coding table using basic comparator and multiplexer components. A pipelining technique was incorporated to enhance the performance of the proposed design. The proposed design was fabricated using a 0.18 μm CMOS technology containing 8405 gates with 2.58 mW simulated power consumption under an operating condition of 100 MHz clock speed. The CHB-MIT Scalp EEG Database was used to test the performance of the proposed technique in terms of compression rate which yielded an average value of 2.35 for 23 channels. Compared with previously proposed hardware-oriented lossless EEG compression designs, this work provided a 14.6% increase in compression rate with a 37.3% reduction in hardware cost while maintaining a low system complexity

Bioinspired Sensor Systems

This editorial summarizes and classifies the contributions presented by different authors to the special issue of the journal Sensors dedicated to Bioinspired Sensor Systems. From the coupling of sensor arrays or networks, plus computer processing abilities, new applications to mimic or to complement human senses are arising in the context of ambient intelligence. Principles used, and illustrative study cases have been presented permitting readers to grasp the current status of the field

Real-time signal detection and classification algorithms for body-centered systems

El principal motivo por el cual los sistemas de comunicación en el entrono corporal se desean con el objetivo de poder obtener y procesar señales biométricas para monitorizar e incluso tratar una condición médica sea ésta causada por una enfermedad o el rendimiento de un atleta. Dado que la base de estos sistemas está en la sensorización y el procesado, los algoritmos de procesado de señal son una parte fundamental de los mismos. Esta tesis se centra en los algoritmos de tratamiento de señales en tiempo real que se utilizan tanto para monitorizar los parámetros como para obtener la información que resulta relevante de las señales obtenidas. En la primera parte se introduce los tipos de señales y sensores en los sistemas en el entrono corporal. A continuación se desarrollan dos aplicaciones concretas de los sistemas en el entorno corporal así como los algoritmos que en las mismas se utilizan. La primera aplicación es el control de glucosa en sangre en pacientes con diabetes. En esta parte se desarrolla un método de detección mediante clasificación de patronones de medidas erróneas obtenidas con el monitor contínuo comercial "Minimed CGMS". La segunda aplicacióin consiste en la monitorizacióni de señales neuronales. Descubrimientos recientes en este campo han demostrado enormes posibilidades terapéuticas (por ejemplo, pacientes con parálisis total que son capaces de comunicarse con el entrono gracias a la monitorizacióin e interpretación de señales provenientes de sus neuronas) y también de entretenimiento. En este trabajo, se han desarrollado algoritmos de detección, clasificación y compresión de impulsos neuronales y dichos algoritmos han sido evaluados junto con técnicas de transmisión inalámbricas que posibiliten una monitorización sin cables. Por último, se dedica un capítulo a la transmisión inalámbrica de señales en los sistemas en el entorno corporal. En esta parte se estudia las condiciones del canal que presenta el entorno corporal para la transmisión de sTraver Sebastiá, L. (2012). Real-time signal detection and classification algorithms for body-centered systems [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/16188Palanci

Ultra Low Energy Communication Protocol for Implantable Wireless Body Sensor Networks

Abstract Title: Ultra Low Energy Communication Protocol for Implantable Wireless Body Sensor Networks. Fariborz Fereydouni_Forouzandeh, Ph.D. Concordia University, 2010 Medical science will soon start to benefit from wireless communication and implantable sensor technologies being developed for use in the human body. Such technologies have a potential to revolutionize the health-care industry by providing real-time patient monitoring capabilities to the health-care professionals. In this regard, implantable wireless body sensor networks (IWBSNs) have recently emerged as an important and growing area of research. The implantable sensors are required to be reliable and very small so that the body does not reject them. They must stay functional in the human body for years, and most importantly, they must not be a source of discomfort to the potential patients. The life time of their embedded batteries could vary from a few days to a few weeks using current hardware and software technologies. In order to make such devices suitable for implantation an order of magnitude reduction in energy use is required. Our research is motivated by this goal. In this thesis, we identify and analyze the sources of energy use in typical devices meant for Implantation in a human body. Our detailed mathematical analysis and computer simulations clearly demonstrate that improving the efficiency of communication protocols is the only realistic way of achieving this goal. Unfortunately, none of the existing low range low energy wireless communication protocols can be used in IWBSNs because of the small energy resources available in the implanted sensor nodes. We propose a new energy aware communication protocol which efficiently encodes data in time domain. It ensures accurate transmission of information. The encoding scheme does this by sending only a single signal from the sensor node to the base station. The protocol is called the Time Based Coded Data protocol or TBCD in short. For proper operation of this protocol reliable synchronization is required. Our proposed synchronization algorithm is energy efficient and stable under worst case conditions as compared to existing algorithms. A sensor node using existing state of the art technology that can only last for a few weeks can be made to last for few years using our proposed communication protocol and the synchronization algorithm

A Power-Efficient Multiband Planar USB Dongle Antenna for Wireless Sensor Networks

Wireless Sensor Networks (WSNs) had been applied in Internet of Things (IoT) and in Industry 4.0. Since a WSN system contains multiple wireless sensor nodes, it is necessary to develop a low-power and multiband wireless communication system that satisfies the specifications of the Federal Communications Commission (FCC) and the Certification European (CE). In a WSN system, many devices are of very small size and can be slipped into a Universal Serial Bus (USB), which is capable of connecting to wireless systems and networks, as well as transferring data. These devices are widely known as USB dongles. This paper develops a planar USB dongle antenna for three frequency bands, namely 2.30–2.69 GHz, 3.40–3.70 GHz, and 5.15–5.85 GHz. This study proposes a novel antenna design that uses four loops to develop the multiband USB dongle. The first and second loops construct the low and intermediate frequency ranges. The third loop resonates the high frequency property, while the fourth loop is used to enhance the bandwidth. The performance and power consumption of the proposed multiband planar USB dongle antenna were significantly improved compared to existing multiband designs

Modulation Techniques for Biomedical Implanted Devices and Their Challenges

Implanted medical devices are very important electronic devices because of their usefulness in monitoring and diagnosis, safety and comfort for patients. Since 1950s, remarkable efforts have been undertaken for the development of bio-medical implanted and wireless telemetry bio-devices. Issues such as design of suitable modulation methods, use of power and monitoring devices, transfer energy from external to internal parts with high efficiency and high data rates and low power consumption all play an important role in the development of implantable devices. This paper provides a comprehensive survey on various modulation and demodulation techniques such as amplitude shift keying (ASK), frequency shift keying (FSK) and phase shift keying (PSK) of the existing wireless implanted devices. The details of specifications, including carrier frequency, CMOS size, data rate, power consumption and supply, chip area and application of the various modulation schemes of the implanted devices are investigated and summarized in the tables along with the corresponding key references. Current challenges and problems of the typical modulation applications of these technologies are illustrated with a brief suggestions and discussion for the progress of implanted device research in the future. It is observed that the prime requisites for the good quality of the implanted devices and their reliability are the energy transformation, data rate, CMOS size, power consumption and operation frequency. This review will hopefully lead to increasing efforts towards the development of low powered, high efficient, high data rate and reliable implanted devices