Plasma Chemistry and Gas Conversion

Low-temperature non-equilibrium gaseous discharges represent nearly ideal media for boosting plasma-based chemical reactions. In these discharges the energy of plasma electrons, after being received from the electromagnetic field, is transferred to the other degrees of freedom differently, ideally with only a small part going to the translational motion of heavy gas particles. This unique property enables the important application of non-equilibrium plasmas for greenhouse gas conversion. While the degree of discharge non-equilibrium often defines the energetic efficiency of conversion, other factors are also of a great importance, such as type of discharge, presence of plasma catalysis, etc. This book is focused on the recent achievements in optimization and understanding of non-equilibrium plasma for gas conversion via plasma modeling and experimental work

Nonthermal Plasma Technology as a Versatile Strategy for Polymeric Biomaterials Surface Modification: A Review

In modern technology, there is a constant need to solve very complex problems and to fine-tune existing solutions. This is definitely the case in modern medicine with emerging fields such as regenerative medicine and tissue engineering. The problems, which are studied in these fields, set very high demands on the applied materials. In most cases, it is impossible to find a single material that meets all demands such as biocompatibility, mechanical strength, biodegradability (if required), and promotion of cell-adhesion, proliferation, and differentiation. A common strategy to circumvent this problem is the application of composite materials, which combine the properties of the different constituents. Another possible strategy is to selectively modify the surface of a material using different modification techniques. In the past decade, the use of nonthermal plasmas for selective surface modification has been a rapidly growing research field. This will be the highlight of this review. In a first part of this paper, a general introduction in the field of surface engineering will be given. Thereafter, we will focus on plasma-based strategies for surface modification. The purpose of the present review is twofold. First, we wish to provide a tutorial-type review that allows a fast introduction for researchers into the field. Second, we aim to give a comprehensive overview of recent work on surface modification of polymeric biomaterials, with a focus on plasma-based strategies. Some recent trends will be exemplified. On the basis of this literature study, we will conclude with some future trends for research

Conversion of Greenhouse Gases to Value Added Products Assisted By Catalytic Nonthermal Plasma

The negative impact the greenhouse gases, especially carbon dioxide (CO2), methane (CH4) and nitrous oxide (N2O) on the environment is well established and development of suitable technologies is warranted in order to regulate their increasing concentrations in the atmosphere. Co-processing of these gases has the advantage of waste minimization, energy production, resource utilization and pollution control. However, as the activation of these gases is highly endothermic, conventional thermocatalytic techniques may not be effective. In this context, nonthermal plasma (NTP) generated by electrical discharges was proposed as an alternative to the conventional methods. NTP created by electrical discharges generate the energetic electrons that colloid with the target gas molecules to decompose them without increasing the temperature of the back ground gas. However, as NTP is non–selective, catalytic NTP was proposed, in order to improve the selectivity to the desired product. The objectives of this research work were to explore NTP for the conversion of the selected greenhouse gases to value added products and to arrive at the suitable catalyst combination to obtain the best selectivity to the desired products like syngas and methanol. This presentation will focus o

Plasma–liquid interactions: a review and roadmap

Plasma–liquid interactions represent a growing interdisciplinary area of research involving plasma science, fluid dynamics, heat and mass transfer, photolysis, multiphase chemistry and aerosol science. This review provides an assessment of the state-of-the-art of this multidisciplinary area and identifies the key research challenges. The developments in diagnostics, modeling and further extensions of cross section and reaction rate databases that are necessary to address these challenges are discussed. The review focusses on non-equilibrium plasmas

Plasma-liquid interactions: a review and roadmap

Plasma-liquid interactions represent a growing interdisciplinary area of research involving plasma science, fluid dynamics, heat and mass transfer, photolysis, multiphase chemistry and aerosol science. This review provides an assessment of the state-of-the-art of this multidisciplinary area and identifies the key research challenges. The developments in diagnostics, modeling and further extensions of cross section and reaction rate databases that are necessary to address these challenges are discussed. The review focusses on non-equilibrium plasmas

Dry reforming of methane using non-thermal plasma-catalysis

This thesis has studied CO2 reforming of CH4 in atmospheric pressure, non-thermal plasma discharges. The objective of this research was to improve the current understanding of plasma-catalytic interactions for methane reforming. Chapter 1 introduces the existing and potential applications for methane reforming products. The industrial approaches to methane reforming and considerations for catalyst selection are discussed. Chapter 2 introduces non-thermal plasma technology and plasma-catalysis. An introduction to the analytical techniques used throughout this thesis is given. Chapter 3 investigates the effects of packing materials into the discharge gap. The materials were found to influence the reactant conversions for dry reforming of methane in the following order: quartz wool > no packing > Al2O3 > zeolite 3A > BaTiO3 > TiO2. In addition to the dielectric properties, the morphology and porosity of the materials was found to influence the reaction chemistry. The materials also affected the electrical properties of the plasma resulting in surface discharges, as opposed to a filamentary discharge mode. Chapter 4 investigates the effects of variation in CH4/CO2 ratios on plasma-assisted dry reforming of CH4. Differences in the reaction performance for different feed gas compositions are explained in terms of the possible reaction pathways and the electron energy distribution functions. A NiO/Al2O3 catalyst is introduced for plasma-catalytic dry reforming of CH4, which was found to have no significant effect on the reaction performance at low specific input energies. Chapter 5 presents the plasma-assisted reduction of a NiO/Al2O3 catalyst by CH4 and H2/Ar discharges. When reduced in a CH4 discharge, the active Ni/Al2O3 catalyst was effective for plasma-catalytic methane decomposition to produce H2 and solid carbon filaments. A decrease in the breakdown voltage was observed, following the catalyst reduction to the more conductive Ni phase. Chapter 6 investigates the performance of the plasma-reduced Ni/Al2O3 catalysts for plasma-catalytic dry reforming of methane. Whilst the activity towards dry reforming of CH4 was low, the CH4 plasma-reduced catalyst was found to be effective for catalysing the decomposition of CH4 into H2 and solid carbon filaments; both potentially useful products. Chapter 7 discusses further work relevant to this thesis.EThOS - Electronic Theses Online ServiceGBUnited Kingdo