Model-free controller design for nonlinear underactuated systems with uncertainties and disturbances by using extended state observer based chattering-free sliding mode control

MakaleWOS:000912458400001Most of the control strategies require a mathematical model or reasonable knowledge that is difficult to obtain for complex systems. Model-free control is a good alternative to avoid the difficulties and complex modeling procedures, especially if the knowledge about the system is insufficient. This paper presents a new control scheme completely independent of the system model. The proposed scheme combines sliding mode control (SMC) with intelligent proportional integral derivative (iPID) control based on a local model and extended state observer (ESO). Although the iPID control makes the proposed method model-free, it cannot guarantee that the tracking errors converge to zero asymptotically except the system is in a steady-state regime. Therefore, the SMC is added to the control scheme to ensure the convergence by minimizing the estimation errors of the observer. The proposed iPIDSMC controller is tested in the presence of different parameter variations and external disturbances on an inverted pendulum - cart (IPC), which is a highly unstable underactuated system with nonlinear coupled dynamics. The proposed controller is compared with the PID, iPID and Hierarchical Sliding Mode Control (HSMC) for a clearer evaluation. Simulation results showed that the proposed controller is extremely insensitive to parameter variations, matched and mismatched disturbances and the control signal of the proposed method is chattering-free, even though it is based on a discontinuous control action

Intelligent model-based control of complex three-link mechanisms

The aim of this study is to understand the complexity and control challenges of the locomotion of a three-link mechanism of a robot system. In order to do this a three-link robot gymnast (Robogymnast) has been built in Cardiff University. The Robogymnast is composed of three links (one arm, one torso, one leg) and is powered by two geared DC motors. Currently the robot has three potentiometers to measure the relative angles between adjacent links and only one tachometer to measure the relative angular position of the first link. A mathematical model for the robot is derived using Lagrange equations. Since the model is inherently nonlinear and multivariate, it presents more challenges when modelling the Robogymnast and dealing with control motion problems. The proposed approach for dealing with the design of the control system is based on a discrete-time linear model around the upright position of the Robogymnast. To study the swinging motion of the Robogymnast, a new technique is proposed to manipulate the frequency and the amplitude of the sinusoidal signals as a means of controlling the motors. Due to the many combinations of the frequency and amplitude, an optimisation method is required to find the optimal set. The Bees Algorithm (BA), a novel swarm-based optimisation technique, is used to enhance the performance of the swinging motion through optimisation of the manipulated parameters of the control actions. The time taken to reach the upright position at its best is 128 seconds. Two different control methods are adopted to study the balancing/stablising of the Robogymnast in both the downward and upright configurations. The first is the optimal control algorithm using the Linear Quadratic Regulator (LQR) technique with integrators to help achieve and maintain the set of reference trajectories. The second is a combination of Local Control (LC) and LQR. Each controller is implemented via reduced order state observer to estimate the unmeasured states in terms of their relative angular velocities. From the identified data in the relative angular positions of the upright balancing control, it is reported that the maximum amplitude of the deviation in the relative angles on average are approximately 7.5° for the first link and 18° for the second link. It is noted that the third link deviated approximately by 2.5° using only the LQR controller, and no significant deviation when using the LQR with LC. To explore the combination between swinging and balancing motions, a switching mechanism between swinging and balancing algorithm is proposed. This is achieved by dividing the controller into three stages. The first stage is the swinging control, the next stage is the transition control which is accomplished using the Independent Joint Control (IJC) technique and finally balancing control is achieved by the LQR. The duration time of the transition controller to track the reference trajectory of the Robogymnast at its best is found to be within 0.4 seconds. An external disturbance is applied to each link of the Robogymnast separately in order to study the controller's ability to overcome the disturbance and to study the controller response. The simulation of the Robogymnast and experimental realization of the controllers are implemented using MATLAB® software and the C++ program environment respectively

Efficient Real-Time Solutions for Nonlinear Model Predictive Control with Applications

Nonlinear Model Predictive Control is an advanced optimisation methodology widely used for developing optimal Feedback Control Systems that use mathematical models of dynamical systems to predict and optimise their future performance. Its popularity comes from its general ability to handle a wide range of challenges present when developing control systems such as input/output constraints, complex nonlinear dynamics multi-variable systems, dynamic systems with significant delays as well as handling of uncertainty, disturbances and fault-tolerance. One of the main and most important challenges is the computational burden associated with the optimisation, particularly when attempting to implement the underlying methods in fast/real-time systems. To tackle this, recent research has been focused on developing efficient real-time solutions or strategies that could be used to overcome this problem. In this case, efficiency may come in various different ways from mathematical simplifications, to fast optimisation solvers, special algorithms and hardware, as well as tailored auto-generated coding tool-kits which help to make an efficient overall implementation of these type of approaches. This thesis addresses this fundamental problem by proposing a wide variety of methods that could serve as alternatives from which the final user can choose from depending on the requirements specific to the application. The proposed approaches focus specifically of developing efficient real-time NMPC methods which have a significantly reduced computational burden whilst preserving desirable properties of standard NMPC such as nominal stability, recursive feasibility guarantees, good performance, as well as adequate numeric conditioning for their use in platforms with reduced numeric precision such as ``floats'' subject to certain conditions being met. One of the specific aims of this work is to obtain faster solutions than the popular ACADO toolkit, in particular when using condensing-based NMPC solutions under the Real-Time Iteration Scheme, considered for all practical purposes the state-of-the-art standard real-time solution to which all the approaches will be bench-marked against. Moreover, part of the work of this thesis uses the concept of ``auto-generation'' for developing similar tool-kits that apply the proposed approaches. To achieve this, the developed tool-kits were supported by the Eigen 3 library which were observed to result in even better computation times than the ACADO toolkit. Finally, although the work undertaking by this thesis does not look into robust control approaches, the developed methods could be used for improving the performance of the underlying ``online'' optimisation, eg. by being able to perform additional iterations of the underlying SQP optimisation, as well as be used in common robust frameworks where multi-model systems must be simultaneously optimised in real-time. Thus, future work will look into merging the proposed methods with other existing strategies to give an even wider range of alternatives to the final user

Advanced Strategies for Robot Manipulators

Amongst the robotic systems, robot manipulators have proven themselves to be of increasing importance and are widely adopted to substitute for human in repetitive and/or hazardous tasks. Modern manipulators are designed complicatedly and need to do more precise, crucial and critical tasks. So, the simple traditional control methods cannot be efficient, and advanced control strategies with considering special constraints are needed to establish. In spite of the fact that groundbreaking researches have been carried out in this realm until now, there are still many novel aspects which have to be explored

Bio-inspired robotic control in underactuation: principles for energy efficacy, dynamic compliance interactions and adaptability.

Biological systems achieve energy efficient and adaptive behaviours through extensive autologous and exogenous compliant interactions. Active dynamic compliances are created and enhanced from musculoskeletal system (joint-space) to external environment (task-space) amongst the underactuated motions. Underactuated systems with viscoelastic property are similar to these biological systems, in that their self-organisation and overall tasks must be achieved by coordinating the subsystems and dynamically interacting with the environment. One important question to raise is: How can we design control systems to achieve efficient locomotion, while adapt to dynamic conditions as the living systems do? In this thesis, a trajectory planning algorithm is developed for underactuated microrobotic systems with bio-inspired self-propulsion and viscoelastic property to achieve synchronized motion in an energy efficient, adaptive and analysable manner. The geometry of the state space of the systems is explicitly utilized, such that a synchronization of the generalized coordinates is achieved in terms of geometric relations along the desired motion trajectory. As a result, the internal dynamics complexity is sufficiently reduced, the dynamic couplings are explicitly characterised, and then the underactuated dynamics are projected onto a hyper-manifold. Following such a reduction and characterization, we arrive at mappings of system compliance and integrable second-order dynamics with the passive degrees of freedom. As such, the issue of trajectory planning is converted into convenient nonlinear geometric analysis and optimal trajectory parameterization. Solutions of the reduced dynamics and the geometric relations can be obtained through an optimal motion trajectory generator. Theoretical background of the proposed approach is presented with rigorous analysis and developed in detail for a particular example. Experimental studies are conducted to verify the effectiveness of the proposed method. Towards compliance interactions with the environment, accurate modelling or prediction of nonlinear friction forces is a nontrivial whilst challenging task. Frictional instabilities are typically required to be eliminated or compensated through efficiently designed controllers. In this work, a prediction and analysis framework is designed for the self-propelled vibro-driven system, whose locomotion greatly relies on the dynamic interactions with the nonlinear frictions. This thesis proposes a combined physics-based and analytical-based approach, in a manner that non-reversible characteristic for static friction, presliding as well as pure sliding regimes are revealed, and the frictional limit boundaries are identified. Nonlinear dynamic analysis and simulation results demonstrate good captions of experimentally observed frictional characteristics, quenching of friction-induced vibrations and satisfaction of energy requirements. The thesis also performs elaborative studies on trajectory tracking. Control schemes are designed and extended for a class of underactuated systems with concrete considerations on uncertainties and disturbances. They include a collocated partial feedback control scheme, and an adaptive variable structure control scheme with an elaborately designed auxiliary control variable. Generically, adaptive control schemes using neural networks are designed to ensure trajectory tracking. Theoretical background of these methods is presented with rigorous analysis and developed in detail for particular examples. The schemes promote the utilization of linear filters in the control input to improve the system robustness. Asymptotic stability and convergence of time-varying reference trajectories for the system dynamics are shown by means of Lyapunov synthesis