Fabrication and characterization of erbium-doped toroidal microcavity lasers

Erbium-doped SiO2 toroidal microcavity lasers are fabricated on a Si substrate using a combination of optical lithography, etching, Er ion implantation, and CO2 laser reflow. Erbium is either preimplanted in the SiO2 base material or postimplanted into a fully fabricated microtoroid. Three-dimensional infrared confocal photoluminescence spectroscopy imaging is used to determine the spatial distribution of optically active Er ions in the two types of microtoroids, and distinct differences are found. Microprobe Rutherford backscattering spectrometry indicates that no macroscopic Er diffusion occurs during the laser reflow for preimplanted microtoroids. From the measured Er doping profiles and calculated optical mode distributions the overlap factor between the Er distribution and mode profile is calculated: Gamma=0.066 and Gamma=0.02 for postimplanted and preimplanted microtoroids, respectively. Single and multimode lasing around 1.5 µm is observed for both types of microtoroids, with the lowest lasing threshold (4.5 µW) observed for the preimplanted microtoroids, which possess the smallest mode volume. When excited in the proper geometry, a clear mode spectrum is observed superimposed on the Er spontaneous emission spectrum. This result indicates the coupling of Er ions to cavity modes

Ultralow-threshold erbium-implanted toroidal microlaser on silicon

We present an erbium-doped microlaser on silicon operating at a wavelength of 1.5 mum that operates at a launched pump threshold as low as 4.5 muW. The 40 mum diameter toroidal microresonator is made using a combination of erbium ion implantation, photolithography, wet and dry etching, and laser annealing, using a thermally grown SiO2 film on a Si substrate as a starting material. The microlaser, doped with an average Er concentration of 2x10^(19) cm(-3), is pumped at 1480 nm using an evanescently coupled tapered optical fiber. Cavity quality factors as high as 3.9x10^(7) are achieved, corresponding to a modal loss of 0.007 dB/cm, and single-mode lasing is observed

Laser cooling and control of excitations in superfluid helium

Superfluidity is an emergent quantum phenomenon which arises due to strong interactions between elementary excitations in liquid helium. These excitations have been probed with great success using techniques such as neutron and light scattering. However measurements to-date have been limited, quite generally, to average properties of bulk superfluid or the driven response far out of thermal equilibrium. Here, we use cavity optomechanics to probe the thermodynamics of superfluid excitations in real-time. Furthermore, strong light-matter interactions allow both laser cooling and amplification of the thermal motion. This provides a new tool to understand and control the microscopic behaviour of superfluids, including phonon-phonon interactions, quantised vortices and two-dimensional quantum phenomena such as the Berezinskii-Kosterlitz-Thouless transition. The third sound modes studied here also offer a pathway towards quantum optomechanics with thin superfluid films, including femtogram effective masses, high mechanical quality factors, strong phonon-phonon and phonon-vortex interactions, and self-assembly into complex geometries with sub-nanometre feature size.Comment: 6 pages, 4 figures. Supplementary information attache

Swept-frequency semiconductor laser coupled to microfabricated biomolecular sensor and methods related thereto

An optoelectronic swept-frequency semiconductor laser coupled to a microfabricated optical biomolecular sensor with integrated resonator and waveguide and methods related thereto are described. Biomolecular sensors with optical resonator microfabricated with integrated waveguide operation can be in a microfluidic flow cell

Bioconjugation Strategies for Microtoroidal Optical Resonators

The development of label-free biosensors with high sensitivity and specificity is of significant interest for medical diagnostics and environmental monitoring, where rapid and real-time detection of antigens, bacteria, viruses, etc., is necessary. Optical resonant devices, which have very high sensitivity resulting from their low optical loss, are uniquely suited to sensing applications. However, previous research efforts in this area have focused on the development of the sensor itself. While device sensitivity is an important feature of a sensor, specificity is an equally, if not more, important performance parameter. Therefore, it is crucial to develop a covalent surface functionalization process, which also maintains the device’s sensing capabilities or optical qualities. Here, we demonstrate a facile method to impart specificity to optical microcavities, without adversely impacting their optical performance. In this approach, we selectively functionalize the surface of the silica microtoroids with biotin, using amine-terminated silane coupling agents as linkers. The surface chemistry of these devices is demonstrated using X-ray photoelectron spectroscopy, and fluorescent and optical microscopy. The quality factors of the surface functionalized devices are also characterized to determine the impact of the chemistry methods on the device sensitivity. The resulting devices show uniform surface coverage, with no microstructural damage. This work represents one of the first examples of non-physisorption-based bioconjugation of microtoroidal optical resonators

Label-Free, Single-Molecule Detection with Optical Microcavities

Current single-molecule detection techniques require labeling the target molecule. We report a highly specific and sensitive optical sensor based on an ultrahigh quality (Q) factor (Q > 10^8) whispering-gallery microcavity. The silica surface is functionalized to bind the target molecule; binding is detected by a resonant wavelength shift. Single-molecule detection is confirmed by observation of single-molecule binding events that shift the resonant frequency, as well as by the statistics for these shifts over many binding events. These shifts result from a thermo-optic mechanism. Additionally, label-free, single-molecule detection of interleukin-2 was demonstrated in serum. These experiments demonstrate a dynamic range of 10^(12) in concentration, establishing the microcavity as a sensitive and versatile detector

Model of a microtoroidal magnetometer

We present a model of a cavity optomechanical magnetic field sensor based on a microtoroidal resonator. The magnetic field induced expansion of a magnetostrictive material is transduced onto the physical structure of a highly compliant optical microresonator. The resulting motion is read out optically with ultra-high sensitivity. According to our theoretical model sensitivities of up to 750 fT/√ Hz may be possible. The simultaneous presence of high-quality mechanical and optical resonances in microtoroids greatly enhances both the response to the magnetic field and the measurement sensitivity