Minimum area, low cost fpga implementation of aes

The Rijndael cipher, designed by Joan Daemen and Vincent Rijmen and recently selected as the official Advanced Encryption Standard (AES) is well suited for hardware use. This implementation can be carried out through several trade-offs between area and speed. This paper presents an 8-bit FPGA implementation of the 128-bit block and 128 bit-key AES cipher. Selected FPGA Family is Altera Flex 10K. The cipher operates at 25 MHz and consumes 470 clock cycles for algorithm encryption, resulting in a throughput of 6.8 Mbps. The design target was optimisation of area and cost.Eje: IV - Workshop de procesamiento distribuido y paraleloRed de Universidades con Carreras en Informática (RedUNCI

Design and analysis of an FPGA-based, multi-processor HW-SW system for SCC applications

The last 30 years have seen an increase in the complexity of embedded systems from a collection of simple circuits to systems consisting of multiple processors managing a wide variety of devices. This ever increasing complexity frequently requires that high assurance, fail-safe and secure design techniques be applied to protect against possible failures and breaches. To facilitate the implementation of these embedded systems in an efficient way, the FPGA industry recently created new families of devices. New features added to these devices include anti-tamper monitoring, bit stream encryption, and optimized routing architectures for physical and functional logic partition isolation. These devices have high capacities and are capable of implementing processors using their reprogrammable logic structures. This allows for an unprecedented level of hardware and software interaction within a single FPGA chip. High assurance and fail-safe systems can now be implemented within the reconfigurable hardware fabric of an FPGA, enabling these systems to maintain flexibility and achieve high performance while providing a high level of data security. The objective of this thesis was to design and analyze an FPGA-based system containing two isolated, softcore Nios processors that share data through two crypto-engines. FPGA-based single-chip cryptographic (SCC) techniques were employed to ensure proper component isolation when the design is placed on a device supporting the appropriate security primitives. Each crypto-engine is an implementation of the Advanced Encryption Standard (AES), operating in Galois/Counter Mode (GCM) for both encryption and authentication. The features of the microprocessors and architectures of the AES crypto-engines were varied with the goal of determining combinations which best target high performance, minimal hardware usage, or a combination of the two

Fault-Resilient Lightweight Cryptographic Block Ciphers for Secure Embedded Systems

The development of extremely-constrained environments having sensitive nodes such as RFID tags and nano-sensors necessitates the use of lightweight block ciphers. Indeed, lightweight block ciphers are essential for providing low-cost confidentiality to such applications. Nevertheless, providing the required security properties does not guarantee their reliability and hardware assurance when the architectures are prone to natural and malicious faults. In this thesis, considering false-alarm resistivity, error detection schemes for the lightweight block ciphers are proposed with the case study of XTEA (eXtended TEA). We note that lightweight block ciphers might be better suited for low-resource environments compared to the Advanced Encryption Standard, providing low complexity and power consumption. To the best of the author\u27s knowledge, there has been no error detection scheme presented in the literature for the XTEA to date. Three different error detection approaches are presented and according to our fault-injection simulations for benchmarking the effectiveness of the proposed schemes, high error coverage is derived. Finally, field-programmable gate array (FPGA) implementations of these proposed error detection structures are presented to assess their efficiency and overhead. The proposed error detection architectures are capable of increasing the reliability of the implementations of this lightweight block cipher. The schemes presented can also be applied to lightweight hash functions with similar structures, making the presented schemes suitable for providing reliability to their lightweight security-constrained hardware implementations

High throughput FPGA Implementation of Advanced Encryption Standard Algorithm

 The growth of computer systems and electronic communications and transactions has meant that the need for effective security and reliability of data communication, processing and storage is more important than ever. In this context, cryptography is a high priority research area in engineering. The Advanced Encryption Standard (AES) is a symmetric-key criptographic algorithm for protecting sensitive information and is one of the most widely secure and used algorithm today. High-throughput, low power and compactness have always been topic of interest for implementing this type of algorithm. In this paper, we are interested on the development of high throughput architecture and implementation of AES algorithm, using the least amount of hardware possible. We have adopted a pipeline approach in order to reduce the critical path and achieve competitive performances in terms of throughput and efficiency. This approach is effectively tested on the AES S-Box substitution. The latter is a complex transformation and the key point to improve architecture performances. Considering the high delay and hardware required for this transformation, we proposed 7-stage pipelined S-box by using composite field in order to deal with the critical path and the occupied area resources. In addition, efficient AES key expansion architecture suitable for our proposed pipelined AES is presented. The implementation had been successfully done on Virtex-5 XC5VLX85 and Virtex-6 XC6VLX75T Field Programmable Gate Array (FPGA) devices using Xilinx ISE v14.7. Our AES design achieved a data encryption rate of 108.69 Gbps and used only 6361 slices ressource. Compared to the best previous work, this implementation improves data throughput by 5.6% and reduces the used slices to 77.69%

Cryptoraptor : high throughput reconfigurable cryptographic processor for symmetric key encryption and cryptographic hash functions

textIn cryptographic processor design, the selection of functional primitives and connection structures between these primitives are extremely crucial to maximize throughput and flexibility. Hence, detailed analysis on the specifications and requirements of existing crypto-systems plays a crucial role in cryptographic processor design. This thesis provides the most comprehensive literature review that we are aware of on the widest range of existing cryptographic algorithms, their specifications, requirements, and hardware structures. In the light of this analysis, it also describes a high performance, low power, and highly flexible cryptographic processor, Cryptoraptor, that is designed to support both today's and tomorrow's encryption standards. To the best of our knowledge, the proposed cryptographic processor supports the widest range of cryptographic algorithms compared to other solutions in the literature and is the only crypto-specific processor targeting the future standards as well. Unlike previous work, we aim for maximum throughput for all known encryption standards, and to support future standards as well. Our 1GHz design achieves a peak throughput of 128Gbps for AES-128 which is competitive with ASIC designs and has 25X and 160X higher throughput per area than CPU and GPU solutions, respectively.Electrical and Computer Engineerin

Minimum area, low cost fpga implementation of aes

The Rijndael cipher, designed by Joan Daemen and Vincent Rijmen and recently selected as the official Advanced Encryption Standard (AES) is well suited for hardware use. This implementation can be carried out through several trade-offs between area and speed. This paper presents an 8-bit FPGA implementation of the 128-bit block and 128 bit-key AES cipher. Selected FPGA Family is Altera Flex 10K. The cipher operates at 25 MHz and consumes 470 clock cycles for algorithm encryption, resulting in a throughput of 6.8 Mbps. The design target was optimisation of area and cost.Eje: IV - Workshop de procesamiento distribuido y paraleloRed de Universidades con Carreras en Informática (RedUNCI

Low-complexity, low-area computer architectures for cryptographic application in resource constrained environments

RCE (Resource Constrained Environment) is known for its stringent hardware design requirements. With the rise of Internet of Things (IoT), low-complexity and low-area designs are becoming prominent in the face of complex security threats. Two low-complexity, low-area cryptographic processors based on the ultimate reduced instruction set computer (URISC) are created to provide security features for wireless visual sensor networks (WVSN) by using field-programmable gate array (FPGA) based visual processors typically used in RCEs. The first processor is the Two Instruction Set Computer (TISC) running the Skipjack cipher. To improve security, a Compact Instruction Set Architecture (CISA) processor running the full AES with modified S-Box was created. The modified S-Box achieved a gate count reduction of 23% with no functional compromise compared to Boyar’s. Using the Spartan-3L XC3S1500L-4-FG320 FPGA, the implementation of the TISC occupies 71 slices and 1 block RAM. The TISC achieved a throughput of 46.38 kbps at a stable 24MHz clock. The CISA which occupies 157 slices and 1 block RAM, achieved a throughput of 119.3 kbps at a stable 24MHz clock. The CISA processor is demonstrated in two main applications, the first in a multilevel, multi cipher architecture (MMA) with two modes of operation, (1) by selecting cipher programs (primitives) and sharing crypto-blocks, (2) by using simple authentication, key renewal schemes, and showing perceptual improvements over direct AES on images. The second application demonstrates the use of the CISA processor as part of a selective encryption architecture (SEA) in combination with the millions instructions per second set partitioning in hierarchical trees (MIPS SPIHT) visual processor. The SEA is implemented on a Celoxica RC203 Vertex XC2V3000 FPGA occupying 6251 slices and a visual sensor is used to capture real world images. Four images frames were captured from a camera sensor, compressed, selectively encrypted, and sent over to a PC environment for decryption. The final design emulates a working visual sensor, from on node processing and encryption to back-end data processing on a server computer

Low-complexity, low-area computer architectures for cryptographic application in resource constrained environments

RCE (Resource Constrained Environment) is known for its stringent hardware design requirements. With the rise of Internet of Things (IoT), low-complexity and low-area designs are becoming prominent in the face of complex security threats. Two low-complexity, low-area cryptographic processors based on the ultimate reduced instruction set computer (URISC) are created to provide security features for wireless visual sensor networks (WVSN) by using field-programmable gate array (FPGA) based visual processors typically used in RCEs. The first processor is the Two Instruction Set Computer (TISC) running the Skipjack cipher. To improve security, a Compact Instruction Set Architecture (CISA) processor running the full AES with modified S-Box was created. The modified S-Box achieved a gate count reduction of 23% with no functional compromise compared to Boyar’s. Using the Spartan-3L XC3S1500L-4-FG320 FPGA, the implementation of the TISC occupies 71 slices and 1 block RAM. The TISC achieved a throughput of 46.38 kbps at a stable 24MHz clock. The CISA which occupies 157 slices and 1 block RAM, achieved a throughput of 119.3 kbps at a stable 24MHz clock. The CISA processor is demonstrated in two main applications, the first in a multilevel, multi cipher architecture (MMA) with two modes of operation, (1) by selecting cipher programs (primitives) and sharing crypto-blocks, (2) by using simple authentication, key renewal schemes, and showing perceptual improvements over direct AES on images. The second application demonstrates the use of the CISA processor as part of a selective encryption architecture (SEA) in combination with the millions instructions per second set partitioning in hierarchical trees (MIPS SPIHT) visual processor. The SEA is implemented on a Celoxica RC203 Vertex XC2V3000 FPGA occupying 6251 slices and a visual sensor is used to capture real world images. Four images frames were captured from a camera sensor, compressed, selectively encrypted, and sent over to a PC environment for decryption. The final design emulates a working visual sensor, from on node processing and encryption to back-end data processing on a server computer