A template-based methodology for efficient microprocessor and FPGA accelerator co-design

Embedded applications usually require Software/Hardware (SW/HW) designs to meet the hard timing constraints and the required design flexibility. Exhaustive exploration for SW/HW designs is a very time consuming task, while the adhoc approaches and the use of partially automatic tools usually lead to less efficient designs. To support a more efficient codesign process for FPGA platforms we propose a systematic methodology to map an application to SW/HW platform with a custom HW accelerator and a microprocessor core. The methodology mapping steps are expressed through parametric templates for the SW/HW Communication Organization, the Foreground (FG) Memory Management and the Data Path (DP) Mapping. Several performance-area tradeoff design Pareto points are produced by instantiating the templates. A real-time bioimaging application is mapped on a FPGA to evaluate the gains of our approach, i.e. 44,8% on performance compared with pure SW designs and 58% on area compared with pure HW designs

Embedded electronic systems driven by run-time reconfigurable hardware

Abstract This doctoral thesis addresses the design of embedded electronic systems based on run-time reconfigurable hardware technology –available through SRAM-based FPGA/SoC devices– aimed at contributing to enhance the life quality of the human beings. This work does research on the conception of the system architecture and the reconfiguration engine that provides to the FPGA the capability of dynamic partial reconfiguration in order to synthesize, by means of hardware/software co-design, a given application partitioned in processing tasks which are multiplexed in time and space, optimizing thus its physical implementation –silicon area, processing time, complexity, flexibility, functional density, cost and power consumption– in comparison with other alternatives based on static hardware (MCU, DSP, GPU, ASSP, ASIC, etc.). The design flow of such technology is evaluated through the prototyping of several engineering applications (control systems, mathematical coprocessors, complex image processors, etc.), showing a high enough level of maturity for its exploitation in the industry.Resumen Esta tesis doctoral abarca el diseño de sistemas electrónicos embebidos basados en tecnología hardware dinámicamente reconfigurable –disponible a través de dispositivos lógicos programables SRAM FPGA/SoC– que contribuyan a la mejora de la calidad de vida de la sociedad. Se investiga la arquitectura del sistema y del motor de reconfiguración que proporcione a la FPGA la capacidad de reconfiguración dinámica parcial de sus recursos programables, con objeto de sintetizar, mediante codiseño hardware/software, una determinada aplicación particionada en tareas multiplexadas en tiempo y en espacio, optimizando así su implementación física –área de silicio, tiempo de procesado, complejidad, flexibilidad, densidad funcional, coste y potencia disipada– comparada con otras alternativas basadas en hardware estático (MCU, DSP, GPU, ASSP, ASIC, etc.). Se evalúa el flujo de diseño de dicha tecnología a través del prototipado de varias aplicaciones de ingeniería (sistemas de control, coprocesadores aritméticos, procesadores de imagen, etc.), evidenciando un nivel de madurez viable ya para su explotación en la industria.Resum Aquesta tesi doctoral està orientada al disseny de sistemes electrònics empotrats basats en tecnologia hardware dinàmicament reconfigurable –disponible mitjançant dispositius lògics programables SRAM FPGA/SoC– que contribueixin a la millora de la qualitat de vida de la societat. S’investiga l’arquitectura del sistema i del motor de reconfiguració que proporcioni a la FPGA la capacitat de reconfiguració dinàmica parcial dels seus recursos programables, amb l’objectiu de sintetitzar, mitjançant codisseny hardware/software, una determinada aplicació particionada en tasques multiplexades en temps i en espai, optimizant així la seva implementació física –àrea de silici, temps de processat, complexitat, flexibilitat, densitat funcional, cost i potència dissipada– comparada amb altres alternatives basades en hardware estàtic (MCU, DSP, GPU, ASSP, ASIC, etc.). S’evalúa el fluxe de disseny d’aquesta tecnologia a través del prototipat de varies aplicacions d’enginyeria (sistemes de control, coprocessadors aritmètics, processadors d’imatge, etc.), demostrant un nivell de maduresa viable ja per a la seva explotació a la indústria

BRAHMS: Novel middleware for integrated systems computation

Biological computational modellers are becoming increasingly interested in building large, eclectic models, including components on many different computational substrates, both biological and non-biological. At the same time, the rise of the philosophy of embodied modelling is generating a need to deploy biological models as controllers for robots in real-world environments. Finally, robotics engineers are beginning to find value in seconding biomimetic control strategies for use on practical robots. Together with the ubiquitous desire to make good on past software development effort, these trends are throwing up new challenges of intellectual and technological integration (for example across scales, across disciplines, and even across time) - challenges that are unmet by existing software frameworks. Here, we outline these challenges in detail, and go on to describe a newly developed software framework, BRAHMS. that meets them. BRAHMS is a tool for integrating computational process modules into a viable, computable system: its generality and flexibility facilitate integration across barriers, such as those described above, in a coherent and effective way. We go on to describe several cases where BRAHMS has been successfully deployed in practical situations. We also show excellent performance in comparison with a monolithic development approach. Additional benefits of developing in the framework include source code self-documentation, automatic coarse-grained parallelisation, cross-language integration, data logging, performance monitoring, and will include dynamic load-balancing and 'pause and continue' execution. BRAHMS is built on the nascent, and similarly general purpose, model markup language, SystemML. This will, in future, also facilitate repeatability and accountability (same answers ten years from now), transparent automatic software distribution, and interfacing with other SystemML tools. (C) 2009 Elsevier Ltd. All rights reserved

Using Partial Reconfiguration for SoC Design and Implementation

Most reconfigurable systems rely on FPGA technology. Among these ones, those which permit dynamic and partial reconfiguration, offer added benefits in flexibility, in-field device upgrade, improved design and manufacturing time, and even, in some cases, power consumption reductions. However, dynamic reconfiguration is a complex task, and the real benefits of its use in real applications have been often questioned. This paper presents an overview of the partial reconfiguration technique application, along with four original applications. The main goal of these applications is to test several architectures with different flexibility and, to search for the partial reconfiguration "killing application", that is, the application that better demonstrates the benefits of today reconfigurable systems based on commercial FPGAs. Therefore, the presented applications are rather a proof of concept, than fully operative and closed systems. First, a brief introduction to the partial reconfigurable systems application topic has been included. After that, the descriptions of the created reconfigurable systems are presented: first, an on-chip communications emulation framework, second, an on chip debugging system, third, a wireless sensor network reconfigurable node and finally, a remote reconfigurable client-server device. Each application is described in a separate section of the paper along with some test and results. General conclusions are included at the end of the pape

Reconfigurable computing for large-scale graph traversal algorithms

This thesis proposes a reconfigurable computing approach for supporting parallel processing in large-scale graph traversal algorithms. Our approach is based on a reconfigurable hardware architecture which exploits the capabilities of both FPGAs (Field-Programmable Gate Arrays) and a multi-bank parallel memory subsystem. The proposed methodology to accelerate graph traversal algorithms has been applied to three case studies, revealing that application-specific hardware customisations can benefit performance. A summary of our four contributions is as follows. First, a reconfigurable computing approach to accelerate large-scale graph traversal algorithms. We propose a reconfigurable hardware architecture which decouples computation and communication while keeping multiple memory requests in flight at any given time, taking advantage of the high bandwidth of multi-bank memory subsystems. Second, a demonstration of the effectiveness of our approach through two case studies: the breadth-first search algorithm, and a graphlet counting algorithm from bioinformatics. Both case studies involve graph traversal, but each of them adopts a different graph data representation. Third, a method for using on-chip memory resources in FPGAs to reduce off-chip memory accesses for accelerating graph traversal algorithms, through a case-study of the All-Pairs Shortest-Paths algorithm. This case study has been applied to process human brain network data. Fourth, an evaluation of an approach based on instruction-set extension for FPGA design against many-core GPUs (Graphics Processing Units), based on a set of benchmarks with different memory access characteristics. It is shown that while GPUs excel at streaming applications, the proposed approach can outperform GPUs in applications with poor locality characteristics, such as graph traversal problems.Open Acces

Design of Special Function Units in Modern Microprocessors

Today’s computing systems demand high performance for applications such as cloud computing, web-based search engines, network applications, and social media tasks. Such software applications involve an extensive use of hashing and arithmetic operations in their computation. In this thesis, we explore the use of new special function units (SFUs) for modern microprocessors, to accelerate such workloads. First, we design an SFU for hashing. Hashing can reduce the complexity of search and lookup from O(p) to O(p/n), where n bins are used and p items are being processed. In modern microprocessors, hashing is done in software. In our work, we propose a novel hardware hash unit design for use in modern microprocessors. Since the hash unit is designed at the hardware level, several advantages are obtained by our approach. First, a hardware-based hash unit executes a single hash instruction to perform a hash operation. In a software-based hashing in modern microprocessors, a hash operation is compiled into multiple instructions, thereby degrading performance. Second, software-based hashing stores hash data in a DRAM (also, hash operation entries can be stored in one of the cache levels). In a hardware-based hash unit, hash data is stored in a dedicated memory module (a hardware hash table), which improves performance. Third, today’s operating systems execute multiple applications (processes) in parallel, which entail high memory utilization. Hence the operating systems require many context switching between different processes, which results in many cache misses. In a hardware-based hash unit, the cache misses is reduced significantly using the dedicated memory module (hash table). These advantages all reduce the power consumption and increase the overall system performance significantly with a minimal increase in the microprocessor’s die area. We evaluate our hardware-based hash unit and compare its performance with software-based hashing. We start by evaluating our design approach at the micro-architecture level in terms of system performance. After that, we design our approach at the circuit level design to obtain the area overhead. Also, we analyze our design’s power and delay for each hash operation. These results are compared with a traditional hashing implementation. Then, we present an FPGA-based coprocessor for hash unit acceleration, applied to a virus checking application. Second, we present an SFU to speed up arithmetic operations. We call this arithmetic SFU a programmable arithmetic unit (PAU). In modern microprocessors, applications that require heavy arithmetic computations are done in software. To improve the performance for such computations, we present a programmable arithmetic unit (PAU), a partially reconfigurable methodology for arithmetic applications. The PAU consists of a set of IP blocks connected to a reconfigurable FPGA controller via a fast mesh-based interconnect. The IP blocks in the PAU can be any IP block such as adders, subtractors, multipliers, comparators and sign extension units. The PAU can have one or more copies of the same IP block (for example, 5 adders and 7 multipliers). The FPGA controller is an on-chip FPGA-based reconfigurable control fabric. The FPGA controller enables different arithmetic applications to be embedded on the PAU. The FPGA controller is programmed for different applications. The reconfigurable logic is based on a LUT-based design like a traditional FPGA. The FPGA controller and the IP blocks in the PAU communicate via a high speed ring data fabric. In our work, we use the PAU as an SFU in modern microprocessors. We compare the performance of different hardware-based arithmetic applications in the PAU with software-based implementations in modern microprocessors