Efficient JPEG 2000 Image Compression Scheme for Multihop Wireless Networks

 When using wireless sensor networks for real-time data transmission, some critical points should be considered. Restricted computational power, reduced memory, narrow bandwidth and energy supplied present strong limits in sensor nodes. Therefore, maximizing network lifetime and minimizing energy consumption are always optimization goals. To overcome the computation and energy limitation of individual sensor nodes during image transmission, an energy efficient image transport scheme is proposed, taking advantage of JPEG2000 still image compression standard using MATLAB and C from Jasper. JPEG2000 provides a practical set of features, not necessarily available in the previous standards. These features were achieved using techniques: the discrete wavelet transform (DWT), and embedded block coding with optimized truncation (EBCOT). Performance of the proposed image transport scheme is investigated with respect to image quality and energy consumption. Simulation results are presented and show that the proposed scheme optimizes network lifetime and reduces significantly the amount of required memory by analyzing the functional influence of each parameter of this distributed image compression algorithm.

An objective based classification of aggregation techniques for wireless sensor networks

Wireless Sensor Networks have gained immense popularity in recent years due to their ever increasing capabilities and wide range of critical applications. A huge body of research efforts has been dedicated to find ways to utilize limited resources of these sensor nodes in an efficient manner. One of the common ways to minimize energy consumption has been aggregation of input data. We note that every aggregation technique has an improvement objective to achieve with respect to the output it produces. Each technique is designed to achieve some target e.g. reduce data size, minimize transmission energy, enhance accuracy etc. This paper presents a comprehensive survey of aggregation techniques that can be used in distributed manner to improve lifetime and energy conservation of wireless sensor networks. Main contribution of this work is proposal of a novel classification of such techniques based on the type of improvement they offer when applied to WSNs. Due to the existence of a myriad of definitions of aggregation, we first review the meaning of term aggregation that can be applied to WSN. The concept is then associated with the proposed classes. Each class of techniques is divided into a number of subclasses and a brief literature review of related work in WSN for each of these is also presented

Evaluation of Tunable Data Compression in Energy-Aware Wireless Sensor Networks

Energy is an important consideration in wireless sensor networks. In the current compression evaluations, traditional indices are still used, while energy efficiency is probably neglected. Moreover, various evaluation biases significantly affect the final results. All these factors lead to a subjective evaluation. In this paper, a new criterion is proposed and a series of tunable compression algorithms are reevaluated. The results show that the new criterion makes the evaluation more objective. Additionally it indicates the situations when compression is unnecessary. A new adaptive compression arbitration system is proposed based on the evaluation results, which improves the performance of compression algorithms

Contributions to Distributed Spatial Compression in Wireless Sensor Networks

Projecte final de carrera fet en col.laboració amb University of Southern CaliforniaPremi Càtedra Red.es en l’Àrea de Sistemes de la Informació al millor Projecte de Fi de Carrera d'Enginyeria de Telecomunicació. Atorgat per Càtedra Red.es. (Curs 2010-2011)This thesis presents several contributions in the field of distributed spatial compression inWireless Sensor Networks. First, since in most of the spatial compression schemes some nodes (raw nodes) need to broadcast their raw data to allow other nodes (aggregating nodes) to perform compression, we design several distributed heuristics which, via local communications, split the nodes into raw/aggregating subsets and optimize the amount of energy consumed in the network. We also extend previous work in the use of graph-based lifting transforms for data compression in distributed data gathering applications, to networks with more than one sink, and scenarios where all data has to be available at every node. Additionally, under the scope of these contributions, we design a new energy-efficient multicast routing algorithm, which is based on the minimum Steiner tree and exploits the broadcast property of wireless communications. We prove via computer-based simulations that our methods reduce the energy consumption in the network in comparison with existing approaches.Award-winnin

Adaptive-Compression Based Congestion Control Technique for Wireless Sensor Networks

Congestion in a wireless sensor network causes an increase in the amount of data loss and delays in data transmission. In this paper, we propose a new congestion control technique (ACT, Adaptive Compression-based congestion control Technique) based on an adaptive compression scheme for packet reduction in case of congestion. The compression techniques used in the ACT are Discrete Wavelet Transform (DWT), Adaptive Differential Pulse Code Modulation (ADPCM), and Run-Length Coding (RLC). The ACT first transforms the data from the time domain to the frequency domain, reduces the range of data by using ADPCM, and then reduces the number of packets with the help of RLC before transferring the data to the source node. It introduces the DWT for priority-based congestion control because the DWT classifies the data into four groups with different frequencies. The ACT assigns priorities to these data groups in an inverse proportion to the respective frequencies of the data groups and defines the quantization step size of ADPCM in an inverse proportion to the priorities. RLC generates a smaller number of packets for a data group with a low priority. In the relaying node, the ACT reduces the amount of packets by increasing the quantization step size of ADPCM in case of congestion. Moreover, in order to facilitate the back pressure, the queue is controlled adaptively according to the congestion state. We experimentally demonstrate that the ACT increases the network efficiency and guarantees fairness to sensor nodes, as compared with the existing methods. Moreover, it exhibits a very high ratio of the available data in the sink

Enabling Compression in Tiny Wireless Sensor Nodes

A Wireless Sensor Network (WSN) is a network composed of sensor nodes communicating among themselves and deployed in large scale (from tens to thousands) for applications such as environmental, habitat and structural monitoring, disaster management, equipment diagnostic, alarm detection, and target classification. In WSNs, typically, sensor nodes are randomly distributed over the area under observation with very high density. Each node is a small device able to collect information from the surrounding environment through one or more sensors, to elaborate this information locally and to communicate it to a data collection centre called sink or base station. WSNs are currently an active research area mainly due to the potential of their applications. However, the deployment of a large scale WSN still requires solutions to a number of technical challenges that stem primarily from the features of the sensor nodes such as limited computational power, reduced communication bandwidth and small storage capacity. Further, since sensor nodes are typically powered by batteries with a limited capacity, energy is a primary constraint in the design and deployment of WSNs. Datasheets of commercial sensor nodes show that data communication is very expensive in terms of energy consumption, whereas data processing consumes significantly less: the energy cost of receiving or transmitting a single bit of information is approximately the same as that required by the processing unit for executing a thousand operations. On the other hand, the energy consumption of the sensing unit depends on the specific sensor type. In several cases, however, it is negligible with respect to the energy consumed by the communication unit and sometimes also by the processing unit. Thus, to extend the lifetime of a WSN, most of the energy conservation schemes proposed in the literature aim to minimize the energy consumption of the communication unit (Croce et al., 2008). To achieve this objective, two main approaches have been followed: power saving through duty cycling and in-network processing. Duty cycling schemes define coordinated sleep/wakeup schedules among nodes in the network. A detailed description of these techniques applied to WSNs can be found in (Anastasi et al., 2009). On the other hand, in-network processing consists in reducing the amount of information to be transmitted by means of aggregation (Boulis et al., 2003) (Croce et al., 2008) (Di Bacco et al., 2004) (Fan et al., 2007)

Compression et transmission d'images avec énergie minimale application aux capteurs sans fil

Un réseau de capteurs d'images sans fil (RCISF) est un réseau ad hoc formé d'un ensemble de noeuds autonomes dotés chacun d'une petite caméra, communiquant entre eux sans liaison filaire et sans l'utilisation d'une infrastructure établie, ni d'une gestion de réseau centralisée. Leur utilité semble majeure dans plusieurs domaines, notamment en médecine et en environnement. La conception d'une chaîne de compression et de transmission sans fil pour un RCISF pose de véritables défis. L'origine de ces derniers est liée principalement à la limitation des ressources des capteurs (batterie faible , capacité de traitement et mémoire limitées). L'objectif de cette thèse consiste à explorer des stratégies permettant d'améliorer l'efficacité énergétique des RCISF, notamment lors de la compression et de la transmission des images. Inéluctablement, l'application des normes usuelles telles que JPEG ou JPEG2000 est éner- givore, et limite ainsi la longévité des RCISF. Cela nécessite leur adaptation aux contraintes imposées par les RCISF. Pour cela, nous avons analysé en premier lieu, la faisabilité d'adapter JPEG au contexte où les ressources énergétiques sont très limitées. Les travaux menés sur cet aspect nous permettent de proposer trois solutions. La première solution est basée sur la propriété de compactage de l'énergie de la Transformée en Cosinus Discrète (TCD). Cette propriété permet d'éliminer la redondance dans une image sans trop altérer sa qualité, tout en gagnant en énergie. La réduction de l'énergie par l'utilisation des régions d'intérêts représente la deuxième solution explorée dans cette thèse. Finalement, nous avons proposé un schéma basé sur la compression et la transmission progressive, permettant ainsi d'avoir une idée générale sur l'image cible sans envoyer son contenu entier. En outre, pour une transmission non énergivore, nous avons opté pour la solution suivante. N'envoyer fiablement que les basses fréquences et les régions d'intérêt d'une image. Les hautes fréquences et les régions de moindre intérêt sont envoyées""infiablement"", car leur pertes n'altèrent que légèrement la qualité de l'image. Pour cela, des modèles de priorisation ont été comparés puis adaptés à nos besoins. En second lieu, nous avons étudié l'approche par ondelettes (wavelets ). Plus précisément, nous avons analysé plusieurs filtres d'ondelettes et déterminé les ondelettes les plus adéquates pour assurer une faible consommation en énergie, tout en gardant une bonne qualité de l'image reconstruite à la station de base. Pour estimer l'énergie consommée par un capteur durant chaque étape de la 'compression, un modèle mathématique est développé pour chaque transformée (TCD ou ondelette). Ces modèles, qui ne tiennent pas compte de la complexité de l'implémentation, sont basés sur le nombre d'opérations de base exécutées à chaque étape de la compression

An Adaptive Lossless Data Compression Scheme for Wireless Sensor Networks

Energy is an important consideration in the design and deployment of wireless sensor networks (WSNs) since sensor nodes are typically powered by batteries with limited capacity. Since the communication unit on a wireless sensor node is the major power consumer, data compression is one of possible techniques that can help reduce the amount of data exchanged between wireless sensor nodes resulting in power saving. However, wireless sensor networks possess significant limitations in communication, processing, storage, bandwidth, and power. Thus, any data compression scheme proposed for WSNs must be lightweight. In this paper, we present an adaptive lossless data compression (ALDC) algorithm for wireless sensor networks. Our proposed ALDC scheme performs compression losslessly using multiple code options. Adaptive compression schemes allow compression to dynamically adjust to a changing source. The data sequence to be compressed is partitioned into blocks, and the optimal compression scheme is applied for each block. Using various real-world sensor datasets we demonstrate the merits of our proposed compression algorithm in comparison with other recently proposed lossless compression algorithms for WSNs