Performance Analysis of Montgomery Multiplier using 32nm CNTFET Technology

In VLSI design vacillating the parameters results in variation of critical factors like area, power and delay. The dominant sources of power dissipation in digital systems are the digital multipliers. A digital multiplier plays a major role in a mixture of arithmetic operations in digital signal processing applications hinge on add and shift algorithms. In order to accomplish high execution speed, parallel array multipliers are comprehensively put into application. The crucial drawback of these multipliers is that it exhausts more power than any other multiplier architectures. Montgomery Multiplication is the popularly used algorithm as it is the most efficient technique to perform arithmetic based calculations. A high-speed multiplier is greatly coveted for its extraordinary leverage. The primary blocks of a multiplier are basically comprised of adders. Thus, in order to attain a significant reduction in power consumption at the chip level the power utilization in adders can be decreased. To obtain desired results in performance parameters of the multiplier an efficient and dynamic adder is proposed and incorporated in the Montgomery multiplier. The Carbon Nanotube field effect transistor (CNTFET) is a promising new device that may supersede some of the fundamental limitations of a silicon based MOSFET. The architecture has been designed in 130nm and 32nm CMOS and CNTFET technology in Synopsys HSpice. The analysed parameters that are considered in determining the performance are power delay product, power and delay and comparison is made with both the technologies.The simulation results of this paper affirmed the CNTFET based Montgomery multiplier improved power consumption by 76.47% ,speed by 72.67% and overall energy by 67.76% as compared to MOSFET-based Montgomery multiplier

Efficient Quantum Modular Arithmetics for the ISQ Era

As we venture into the Intermediate-Scale Quantum (ISQ) era, the proficiency of modular arithmetic operations becomes pivotal for advancing quantum cryptographic algorithms. This study presents an array of quantum circuits, each precision-engineered for modular arithmetic functions critical to cryptographic applications. Central to our exposition are quantum modular adders, multipliers, and exponential operators, whose designs are rigorously optimized for ISQ devices. We provide a theoretical framework and practical implementations in the PennyLane quantum software, bridging the gap between conceptual and applied quantum computing. Our simulations validate the efficacy of these methodologies, offering a strategic compass for developing quantum algorithms that align with the rapid progression of quantum technology.Comment: 11 pages, 10 figure

Reconfigurable Architecture for Elliptic Curve Cryptography Using FPGA

The high performance of an elliptic curve (EC) crypto system depends efficiently on the arithmetic in the underlying finite field. We have to propose and compare three levels of Galois Field , , and . The proposed architecture is based on Lopez-Dahab elliptic curve point multiplication algorithm, which uses Gaussian normal basis for field arithmetic. The proposed is based on an efficient Montgomery add and double algorithm, also the Karatsuba-Ofman multiplier and Itoh-Tsujii algorithm are used as the inverse component. The hardware design is based on optimized finite state machine (FSM), with a single cycle 193 bits multiplier, field adder, and field squarer. The another proposed architecture is based on applications for which compactness is more important than speed. The FPGA’s dedicated multipliers and carry-chain logic are used to obtain the small data path. The different optimization at the hardware level improves the acceleration of the ECC scalar multiplication, increases frequency and the speed of operation such as key generation, encryption, and decryption. Finally, we have to implement our design using Xilinx XC4VLX200 FPGA device

Multi-Unit Serial Polynomial Multiplier to Accelerate NTRU-Based Cryptographic Schemes in IoT Embedded Systems

Concern for the security of embedded systems that implement IoT devices has become a crucial issue, as these devices today support an increasing number of applications and services that store and exchange information whose integrity, privacy, and authenticity must be adequately guaranteed. Modern lattice-based cryptographic schemes have proven to be a good alternative, both to face the security threats that arise as a consequence of the development of quantum computing and to allow efficient implementations of cryptographic primitives in resource-limited embedded systems, such as those used in consumer and industrial applications of the IoT. This article describes the hardware implementation of parameterized multi-unit serial polynomial multipliers to speed up time-consuming operations in NTRU-based cryptographic schemes. The flexibility in selecting the design parameters and the interconnection protocol with a general-purpose processor allow them to be applied both to the standardized variants of NTRU and to the new proposals that are being considered in the post-quantum contest currently held by the National Institute of Standards and Technology, as well as to obtain an adequate cost/performance/security-level trade-off for a target application. The designs are provided as AXI4 bus-compliant intellectual property modules that can be easily incorporated into embedded systems developed with the Vivado design tools. The work provides an extensive set of implementation and characterization results in devices of the Xilinx Zynq-7000 and Zynq UltraScale+ families for the different sets of parameters defined in the NTRUEncrypt standard. It also includes details of their plug and play inclusion as hardware accelerators in the C implementation of this public-key encryption scheme codified in the LibNTRU library, showing that acceleration factors of up to 3.1 are achieved when compared to pure software implementations running on the processing systems included in the programmable devices.European Union 952622Ministerio de Ciencia e Innovación PID2020-116664RB100, 10.13039/50110001103

Private and Public-Key Side-Channel Threats Against Hardware Accelerated Cryptosystems

Modern side-channel attacks (SCA) have the ability to reveal sensitive data from non-protected hardware implementations of cryptographic accelerators whether they be private or public-key systems. These protocols include but are not limited to symmetric, private-key encryption using AES-128, 192, 256, or public-key cryptosystems using elliptic curve cryptography (ECC). Traditionally, scalar point (SP) operations are compelled to be high-speed at any cost to reduce point multiplication latency. The majority of high-speed architectures of contemporary elliptic curve protocols rely on non-secure SP algorithms. This thesis delivers a novel design, analysis, and successful results from a custom differential power analysis attack on AES-128. The resulting SCA can break any 16-byte master key the sophisticated cipher uses and it\u27s direct applications towards public-key cryptosystems will become clear. Further, the architecture of a SCA resistant scalar point algorithm accompanied by an implementation of an optimized serial multiplier will be constructed. The optimized hardware design of the multiplier is highly modular and can use either NIST approved 233 & 283-bit Kobliz curves utilizing a polynomial basis. The proposed architecture will be implemented on Kintex-7 FPGA to later be integrated with the ARM Cortex-A9 processor on the Zynq-7000 AP SoC (XC7Z045) for seamless data transfer and analysis of the vulnerabilities SCAs can exploit

Aspects of hardware methodologies for the NTRU public-key cryptosystem

Cryptographic algorithms which take into account requirements for varying levels of security and reduced power consumption in embedded devices are now receiving additional attention. The NTRUEncrypt algorithm has been shown to provide certain advantages when designing low power and resource constrained systems, while still providing comparable security levels to higher complexity algorithms. The research presented in this thesis starts with an examination of the general NTRUEncrypt system, followed by a more practical examination with respect to the IEEE 1363.1 draft standard. In contrast to previous research, the focus is shifted away from specific optimizations but rather provides a study of many of the recommended practices and suggested optimizations with particular emphasis on polynomial arithmetic and parameter selection. Various methods are examined for storing, inverting and multiplying polynomials used in the system. Recommendations for algorithm and parameter selection are made regarding implementation in software and hardware with respect to the resources available. Although the underlying mathematical principles have not been significantly questioned, stable recommended practices are still being developed for the NTRUEncrypt system. As a further complication, recommended optimizations have come from various researchers and have been split between hardware and software implementations. In this thesis, a generic VHDL model is presented, based on the IEEE 1363.1 draft standard, which is designed for adaptation to software or hardware implementation while providing flexibility for changes in recommended practices

Performance and Efficiency Exploration of Hardware Polynomial Multipliers for Post-Quantum Lattice-Based Cryptosystems

The significant effort in the research and design of large-scale quantum computers has spurred a transition to post-quantum cryptographic primitives worldwide. The post-quantum cryptographic primitive standardization effort led by the US NIST has recently selected the asymmetric encryption primitive Kyber as its candidate for standardization and indicated NTRU, as a valid alternative if intellectual property issues are not solved. Finally, a more conservative alternative to NTRU, NTRUPrime was also considered as an alternate candidate, due to its design choices that remove the possibility for a large set of attacks preemptively. All the aforementioned asymmetric primitives provide good performances, and are prime choices to provide IoT devices with post-quantum confidentiality services. In this work, we present a comprehensive exploration of hardware designs for the computation of polynomial multiplications, the workhorse operation in all the aforementioned cryptosystems, with a thorough analysis of performance, compactness and efficiency. The presented designs cope with the differences in the arithmetics of polynomial rings employed by distinct cryptosystems, benefiting from configurations and optimizations that are applicable at synthesis time and/or run time. In this context, we target a use case scenario where long-term key pairs are used, such as the ones for VPNs (e.g., over IPSec), secure shell protocols and instant messaging applications. Our high-performance design variants exhibit figures of latency comparable to the ones needed for the execution of the symmetric cryptographic primitives also included in the Post-Quantum schemes. Notably, the performance figures of the designs proposed for NTRU and NTRU Prime surpass the ones described in the related literature

Adaptable Security in Wireless Sensor Networks by Using Reconfigurable ECC Hardware Coprocessors

Specific features of Wireless Sensor Networks (WSNs) like the open accessibility to nodes, or the easy observability of radio communications, lead to severe security challenges. The application of traditional security schemes on sensor nodes is limited due to the restricted computation capability, low-power availability, and the inherent low data rate. In order to avoid dependencies on a compromised level of security, a WSN node with a microcontroller and a Field Programmable Gate Array (FPGA) is used along this work to implement a state-of-the art solution based on ECC (Elliptic Curve Cryptography). In this paper it is described how the reconfiguration possibilities of the system can be used to adapt ECC parameters in order to increase or reduce the security level depending on the application scenario or the energy budget. Two setups have been created to compare the software- and hardware-supported approaches. According to the results, the FPGA-based ECC implementation requires three orders of magnitude less energy, compared with a low power microcontroller implementation, even considering the power consumption overhead introduced by the hardware reconfiguratio

Reconfigurable elliptic curve cryptography

Elliptic Curve Cryptosystems (ECC) have been proposed as an alternative to other established public key cryptosystems such as RSA (Rivest Shamir Adleman). ECC provide more security per bit than other known public key schemes based on the discrete logarithm problem. Smaller key sizes result in faster computations, lower power consumption and memory and bandwidth savings, thus making ECC a fast, flexible and cost-effective solution for providing security in constrained environments. Implementing ECC on reconfigurable platform combines the speed, security and concurrency of hardware along with the flexibility of the software approach. This work proposes a generic architecture for elliptic curve cryptosystem on a Field Programmable Gate Array (FPGA) that performs an elliptic curve scalar multiplication in 1.16milliseconds for GF (2163), which is considerably faster than most other documented implementations. One of the benefits of the proposed processor architecture is that it is easily reprogrammable to use different algorithms and is adaptable to any field order. Also through reconfiguration the arithmetic unit can be optimized for different area/speed requirements. The mathematics involved uses binary extension field of the form GF (2n) as the underlying field and polynomial basis for the representation of the elements in the field. A significant gain in performance is obtained by using projective coordinates for the points on the curve during the computation process