A Framework for Profit Maximization in a Grid-Connected Microgrid with Hybrid Resources Using a Novel Rule Base-BAT Algorithm

In this paper, an energy management system (EMS) is proposed for optimal operation of a microgrid (MG). Dispersed photovoltaic arrays (PVs) and wind turbine generators (WTs) as renewable energy sources (RES) supply a major part of the network demanded energy. Also, an energy storage system (ESS), a micro-turbine unit (MT), and a fuel cell unit (FC) are integrated. The uncertainty and stochastic nature of the network load and RES data are treated via probabilistic modeling and scenario-selection approach. The predicted day-ahead data of the most diverse hourly scenarios are entered into the proposed EMS to determine the active and reactive power (P-Q) participations of local distributed resources. Likewise, it specifies the discharging/charging power and state of the ESS in addition to the exchanged active/reactive power amounts with the main network. The main goal is to maximize the profit of the secondary grid while satisfying all technical constraints. In the proposed EMS, the day-ahead energy management is developed as a comprehensive optimization problem. Moreover, the paper proposes novel modifications to improve the BAT optimization technique. The optimization problem of the energy management in the microgrid is implemented using a new integrated rule base-improved BAT method. Furthermore, the proposed EMS competence is proven by comparing its performance to recent literature. © 2013 IEEE.Ministry of Higher Education, Egypt, MHEThis work was supported by the Ministry of Higher Education, Egypt

Energy and performance-optimized scheduling of tasks in distributed cloud and edge computing systems

Infrastructure resources in distributed cloud data centers (CDCs) are shared by heterogeneous applications in a high-performance and cost-effective way. Edge computing has emerged as a new paradigm to provide access to computing capacities in end devices. Yet it suffers from such problems as load imbalance, long scheduling time, and limited power of its edge nodes. Therefore, intelligent task scheduling in CDCs and edge nodes is critically important to construct energy-efficient cloud and edge computing systems. Current approaches cannot smartly minimize the total cost of CDCs, maximize their profit and improve quality of service (QoS) of tasks because of aperiodic arrival and heterogeneity of tasks. This dissertation proposes a class of energy and performance-optimized scheduling algorithms built on top of several intelligent optimization algorithms. This dissertation includes two parts, including background work, i.e., Chapters 3–6, and new contributions, i.e., Chapters 7–11. 1) Background work of this dissertation. Chapter 3 proposes a spatial task scheduling and resource optimization method to minimize the total cost of CDCs where bandwidth prices of Internet service providers, power grid prices, and renewable energy all vary with locations. Chapter 4 presents a geography-aware task scheduling approach by considering spatial variations in CDCs to maximize the profit of their providers by intelligently scheduling tasks. Chapter 5 presents a spatio-temporal task scheduling algorithm to minimize energy cost by scheduling heterogeneous tasks among CDCs while meeting their delay constraints. Chapter 6 gives a temporal scheduling algorithm considering temporal variations of revenue, electricity prices, green energy and prices of public clouds. 2) Contributions of this dissertation. Chapter 7 proposes a multi-objective optimization method for CDCs to maximize their profit, and minimize the average loss possibility of tasks by determining task allocation among Internet service providers, and task service rates of each CDC. A simulated annealing-based bi-objective differential evolution algorithm is proposed to obtain an approximate Pareto optimal set. A knee solution is selected to schedule tasks in a high-profit and high-quality-of-service way. Chapter 8 formulates a bi-objective constrained optimization problem, and designs a novel optimization method to cope with energy cost reduction and QoS improvement. It jointly minimizes both energy cost of CDCs, and average response time of all tasks by intelligently allocating tasks among CDCs and changing task service rate of each CDC. Chapter 9 formulates a constrained bi-objective optimization problem for joint optimization of revenue and energy cost of CDCs. It is solved with an improved multi-objective evolutionary algorithm based on decomposition. It determines a high-quality trade-off between revenue maximization and energy cost minimization by considering CDCs’ spatial differences in energy cost while meeting tasks’ delay constraints. Chapter 10 proposes a simulated annealing-based bees algorithm to find a close-to-optimal solution. Then, a fine-grained spatial task scheduling algorithm is designed to minimize energy cost of CDCs by allocating tasks among multiple green clouds, and specifies running speeds of their servers. Chapter 11 proposes a profit-maximized collaborative computation offloading and resource allocation algorithm to maximize the profit of systems and guarantee that response time limits of tasks are met in cloud-edge computing systems. A single-objective constrained optimization problem is solved by a proposed simulated annealing-based migrating birds optimization. This dissertation evaluates these algorithms, models and software with real-life data and proves that they improve scheduling precision and cost-effectiveness of distributed cloud and edge computing systems

Distributed Power Generation Scheduling, Modelling and Expansion Planning

Distributed generation is becoming more important in electrical power systems due to the decentralization of energy production. Within this new paradigm, new approaches for the operation and planning of distributed power generation are yet to be explored. This book deals with distributed energy resources, such as renewable-based distributed generators and energy storage units, among others, considering their operation, scheduling, and planning. Moreover, other interesting aspects such as demand response, electric vehicles, aggregators, and microgrid are also analyzed. All these aspects constitute a new paradigm that is explored in this Special Issue

Recent techniques used in home energy management systems: a review

Power systems are going through a transition period. Consumers want more active participation in electric system management, namely assuming the role of producers–consumers, prosumers in short. The prosumers’ energy production is heavily based on renewable energy sources, which, besides recognized environmental benefits, entails energy management challenges. For instance, energy consumption of appliances in a home can lead to misleading patterns. Another challenge is related to energy costs since inefficient systems or unbalanced energy control may represent economic loss to the prosumer. The so-called home energy management systems (HEMS) emerge as a solution. When well-designed HEMS allow prosumers to reach higher levels of energy management, this ensures optimal management of assets and appliances. This paper aims to present a comprehensive systematic review of the literature on optimization techniques recently used in the development of HEMS, also taking into account the key factors that can influence the development of HEMS at a technical and computational level. The systematic review covers the period 2018–2021. As a result of the review, the major developments in the field of HEMS in recent years are presented in an integrated manner. In addition, the techniques are divided into four broad categories: traditional techniques, model predictive control, heuristics and metaheuristics, and other techniques.info:eu-repo/semantics/publishedVersio

State-of-the-Art Using Bibliometric Analysis of Wind-Speed and -Power Forecasting Methods Applied in Power Systems

The integration of wind energy into power systems has intensified as a result of the urgency for global energy transition. This requires more accurate forecasting techniques that can capture the variability of the wind resource to achieve better operative performance of power systems. This paper presents an exhaustive review of the state-of-the-art of wind-speed and -power forecasting models for wind turbines located in different segments of power systems, i.e., in large wind farms, distributed generation, microgrids, and micro-wind turbines installed in residences and buildings. This review covers forecasting models based on statistical and physical, artificial intelligence, and hybrid methods, with deterministic or probabilistic approaches. The literature review is carried out through a bibliometric analysis using VOSviewer and Pajek software. A discussion of the results is carried out, taking as the main approach the forecast time horizon of the models to identify their applications. The trends indicate a predominance of hybrid forecast models for the analysis of power systems, especially for those with high penetration of wind power. Finally, it is determined that most of the papers analyzed belong to the very short-term horizon, which indicates that the interest of researchers is in this time horizon

Mathematical framework for designing energy matching and trading within green building neighbourhood system

Nowadays, energy efficiency, energy matching and trading, power production based on renewable energyresources, improving reliability, increasing power quality and other concepts are providing the most important topics in the power systems analysis especially in green building in the neighbourhood systems (GBNS). To do so, the need to obtain the optimal and economical dispatch of energy matching and trading should be expressed at the same time. Although, there are some solutions in literature but there is still a lack of mathematical framework for energy matching and trading in GBNS. In this dissertation, a mathematical framework is developed with the aim of supporting an optimal energy matching and trading within a GBNS.This aim will be achieved through several optimization algorithms based on heuristic and realistic optimization techniques. The appearance of new methods based on optimization algorithms and the challenges of managing a system contain different type of energy resources was also replicating the challenges encountered in this thesis. As a result, these methods are needed to be applied in such a way to achieve maximum efficiency,enhance the economic dispatch as well as to provide the best performance in GBNS. In order to validate theproposed framework, several case studies are simulated in this thesis and optimized based on various optimization algorithms. The better performances of the proposed algorithms are shown in comparison with the realistic optimization algorithms, and its effectiveness is validated over several GBs. The obtained results show convergence speed increase and the remarkable improvement of efficiency and accuracy under different condition. The obtained results clearly show that the proposed framework is effective in achieving optimal dispatch of generation resources in systems with multiple GBs and minimizing the market clearing price for the consumers and providing the better utilization of renewable energy sources

Decision support for participation in electricity markets considering the transaction of services and electricity at the local level

[EN] The growing concerns regarding the lack of fossil fuels, their costs, and their impact on the environment have led governmental institutions to launch energy policies that promote the increasing installation of technologies that use renewable energy sources to generate energy. The increasing penetration of renewable energy sources brings a great fluctuation on the generation side, which strongly affects the power and energy system management. The control of this system is moving from hierarchical and central to a smart and distributed approach. The system operators are nowadays starting to consider the final end users (consumers and prosumers) as a part of the solution in power system operation activities. In this sense, the end-users are changing their behavior from passive to active players. The role of aggregators is essential in order to empower the end-users, also contributing to those behavior changes. Although in several countries aggregators are legally recognized as an entity of the power and energy system, its role being mainly centered on representing end-users in wholesale market participation. This work contributes to the advancement of the state-of-the-art with models that enable the active involvement of the end-users in electricity markets in order to become key participants in the management of power and energy systems. Aggregators are expected to play an essential role in these models, making the connection between the residential end-users, electricity markets, and network operators. Thus, this work focuses on providing solutions to a wide variety of challenges faced by aggregators. The main results of this work include the developed models to enable consumers and prosumers participation in electricity markets and power and energy systems management. The proposed decision support models consider demand-side management applications, local electricity market models, electricity portfolio management, and local ancillary services. The proposed models are validated through case studies based on real data. The used scenarios allow a comprehensive validation of the models from different perspectives, namely end-users, aggregators, and network operators. The considered case studies were carefully selected to demonstrate the characteristics of each model, and to demonstrate how each of them contributes to answering the research questions defined to this work.[ES] La creciente preocupación por la escasez de combustibles fósiles, sus costos y su impacto en el medio ambiente ha llevado a las instituciones gubernamentales a lanzar políticas energéticas que promuevan la creciente instalación de tecnologías que utilizan fuentes de energía renovables para generar energía. La creciente penetración de las fuentes de energía renovable trae consigo una gran fluctuación en el lado de la generación, lo que afecta fuertemente la gestión del sistema de potencia y energía. El control de este sistema está pasando de un enfoque jerárquico y central a un enfoque inteligente y distribuido. Actualmente, los operadores del sistema están comenzando a considerar a los usuarios finales (consumidores y prosumidores) como parte de la solución en las actividades de operación del sistema eléctrico. En este sentido, los usuarios finales están cambiando su comportamiento de jugadores pasivos a jugadores activos. El papel de los agregadores es esencial para empoderar a los usuarios finales, contribuyendo también a esos cambios de comportamiento. Aunque en varios países los agregadores están legalmente reconocidos como una entidad del sistema eléctrico y energético, su papel se centra principalmente en representar a los usuarios finales en la participación del mercado mayorista. Este trabajo contribuye al avance del estado del arte con modelos que permiten la participación activa de los usuarios finales en los mercados eléctricos para convertirse en participantes clave en la gestión de los sistemas de potencia y energía. Se espera que los agregadores desempeñen un papel esencial en estos modelos, haciendo la conexión entre los usuarios finales residenciales, los mercados de electricidad y los operadores de red. Por lo tanto, este trabajo se enfoca en brindar soluciones a una amplia variedad de desafíos que enfrentan los agregadores. Los principales resultados de este trabajo incluyen los modelos desarrollados para permitir la participación de los consumidores y prosumidores en los mercados eléctricos y la gestión de los sistemas de potencia y energía. Los modelos de soporte de decisiones propuestos consideran aplicaciones de gestión del lado de la demanda, modelos de mercado eléctrico local, gestión de cartera de electricidad y servicios auxiliares locales. Los modelos propuestos son validan mediante estudios de casos basados en datos reales. Los escenarios utilizados permiten una validación integral de los modelos desde diferentes perspectivas, a saber, usuarios finales, agregadores y operadores de red. Los casos de estudio considerados fueron cuidadosamente seleccionados para demostrar las características de cada modelo y demostrar cómo cada uno de ellos contribuye a responder las preguntas de investigación definidas para este trabajo

A Study of Vehicle-to-Vehicle Power Transfer Operation in V2G-Equipped Microgrid

Bidirectional vehicle-to-grid (V2G) system utilizes the batteries of parked electric-drive-vehicles to provide energy storage and backup services in a power system. Such services in a V2G-equipped microgrid system can be used as an enabler of enhancing the renewable energy source (RES) penetration by storing the energy during the surplus of RES supply and supplying the energy during the lack of RES supply. In this research, we aim at enhancing the storage capacity of V2G system by introducing a novel vehicle-to-vehicle power transfer operation that runs on the top of V2G services. The vehicle-to-vehicle (V2V) operation transfers the energy from the source vehicles (which are parked for relatively longer times) to the destination vehicles (which are parked for relatively shorter times). The depleted energy of the source vehicles is fulfilled by the surplus RES supply in the future. In this way, the destination vehicles are effectively charged by RES supply, thereby enhancing the storage capacity of the V2G system. We can also say that the V2V operation would become beneficial only when there is a sufficient amount of surplus RES supply in the future. We propose a decision rule to distinguish if a vehicle should be a source vehicle or a destination vehicle during the V2V operation. The decision rule is designed based on the two factors, namely the state-of-charge of vehicle’s battery, and the remaining time of vehicle to depart. In this research, we conduct a comprehensive study to analyze the impacts of state-of-charge and mobility pattern of vehicles on different performance metrics via simulation. The results shows that in order to achieve better performance of V2V operation, the state-of-charge of vehicle’s battery should be given more priority over the remaining time of vehicle to depart. The vehicle mobility pattern with unexpected departure greatly reduced the overall performance of the V2G system